• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.6
• /
• pp.1933-1947
• /
• 1991

The synthesis of supplementary features of injection molded parts has been done empirically, since it requires profound knowledge about the features' moldability and causal effects on the properties of the part, which are not available to designers through current CAD systems. RIBBER is a knowledge module which contains knowledge to permit non-experts as well as mold design experts to generate acceptable supplementary features of injection molded parts. A knowledge-based CAD system is constructed by adding the knowledge module, RIBBER, for mold feature synthesis and appropriate CAE programs for mold design analysis to an existing geometric modeler in order to provide designers, at the initial design stage, with comprehensive process knowledge-based CAD system is a new tool which enables the concurrent design and CIM with integrated and balanced design decisions at the initial design stage of injection molding.

• Proceedings of the KAIS Fall Conference
• /
• 2000.04a
• /
• pp.9-9
• /
• 2000

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.8
• /
• pp.164-173
• /
• 2001

The configuration of injection molded part can be classified into primary feature and supplementary feature. Even though supplementary features such as ribs, snap fits and bosses make mold more complicated, which cause the increasement of the mold cost, supplementary features should be attached to primary features because of assembly, reinforcement, moldability and other functional purposes. But it is not easy for novice designers to design them appropriately because of the profound knowledge related to Injection molding. In this paper, the intelligent design tool called ISFD(Intelligent Supplementary Feature Designer) which supplies easy, simple, time and cost-effective design method has been studied and developed. A knowledge-based design system is a new tool which enables the concurrent design and CIM with integrated and balanced design decisions at the initial design stage of injection molding.

• Proceedings of the KAIS Fall Conference
• /
• 2010.05b
• /
• pp.1149-1152
• /
• 2010

본 연구의 목적은 리브를 갖는 사출제품을 설계할 때 공리적 접근방법을 이용하여 좋은 설계를 수행할 수 있도록 하려는 것이다. 또한 공리적 접근을 통해 최종 얻어진 설계행렬을 Acclaro DFSS(주) 프로그램을 이용하여 정렬함으로써 최종 설계행렬이 공리적 설계임을 쉽게 알 수 있도록 시도 하였다.

• Proceedings of the KAIS Fall Conference
• /
• 2010.05b
• /
• pp.1145-1148
• /
• 2010

우리 생활에서 큰 비중을 차지하고 있는 플라스틱은 그 사용 정도가 점점 증가하고 있는 추세이다. 그중에서도 플라스틱은 사출성형제품에서 가장 많이 사용한다. 사출성형의 제품은 높은 정밀도와 긴수명이 요구되며, 품질, 가격, 납기에 대해 사용자의 욕구를 충족시켜줄 수 있어야한다. 하지만 플라스틱은 열이나 하중 등 사용 환경에 따라 변하는 결점을 가지고 있으므로 일용잡화나 케이스류, 장식품 등의 일반적인 용도 이외에는 사용에 한계가 있다. 그러므로 설계자는 보다 과학적이고 합리적인 이론적 지식이 필요하다. 이에 사출성형 제품의 합리적인 설계를 위해 공리적 설계 기법을 이용하여 보다 좋은 설계를 수행하고 트리즈 기법을 활용함으로써 사출성형 제품의 문제들을 창의적으로 접근해봄으로써 문제 해결을 시도하려는 것이다.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.10
• /
• pp.32-39
• /
• 1995

The design of injection molded polymeric parts has been done empirically, since it requires profound knowledge about the moldability and causal effects on the properties of the part, which are not available to designers through current CAD systems. An interactive computer-based design system is developed in order to realize the concept of rational design for the productivity and quality of mold making. The knowledge-based CAD system is constructed by adding the knowledge -base module for mold feature synthesis and appropriate CAE programs for mold design analysis in order to provide designers, at the initial design stage, with comprehensive process knowledge for feature synthesis, performance analysis and feature-based geometric modeling. A knowledge-based CAD system is a new tool which enables the concurrent design with integrated and balanced design decisions at the initial design stage of injection molding.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2003.10a
• /
• pp.107-112
• /
• 2003

형상기억합금(shape memory alloy; SMA)은 소성가공을 통하여 원하는 형태로 변형시킨 이후에도(현재로서는 최대 10%미만의 변형) 일정조건의 열을 가하면 원래의 형상으로 복원되는 합금을 말한다. 형상기억효과는 고상(solid state)에서의 금속조직이 오스테나이트(austenite: 이하 A 또는 B2상)로부터 마르텐사이트(martensite: 이하 M 또는 B19'상)로, 다시 역으로 마르텐사이트에서 오스테나이트로의 변태에 기인되는 것으로 밝혀지고 있으며 이러한 변태는 온도유기변태(temperature induced transformation)와 응력유기변태(stress induced transformation)로 분류할 수 있다.(중략)

• Korean Journal of Food Science and Technology
• /
• v.41 no.6
• /
• pp.657-661
• /
• 2009

Liquid microparticulated seaweed calcium was manufactured via a wet grinding process. Thereafter, different forming agents such as cyclodextrin, gum arabic, and Na-caseinate were added to the liquid calcium, which was then spray-dried to investigate the quality of the powdered calcium treatments. The moisture contents of samples were approximately 2%. It was also determined that the different kinds of forming agents did not affect the spray drying efficiency. In addition, calcium solubility was the highest in a solution of pH 2. In buffer solution and vinegar, the powdered calcium made with gum arabic showed the highest solubility among the treatments. The calcium contents of all the powdered microparticulate seaweed calcium samples were about 28%, and calcium content was not affected by the forming agents. The spray-dried calcium powder made by spray drying with gum arabic had the highest water vapor uptake, whereas the seaweed calcium was stable in terms of water adsorption. The results of SEM observations indicated that a portion of the spray-dried calcium powders were in nano-scale after wet-grinding. Among the treatments, the use of saccharides as a forming agent resulted in the most uniform particle distribution after spray-drying.

• Analytical Science and Technology
• /
• v.24 no.6
• /
• pp.519-526
• /
• 2011

Chemometrics using near-infrared (NIR) and Raman spectroscopy have found significant uses in a variety quantitative and qualitative analyses of pharmaceutical products in complex matrixes. Most of the pharmaceutical can be measured directly with little or no sample preparation using these spectroscopic methods. During pharmaceutical manufacturing process, analytical techniques with no or less sample preparation are very critical to confirm the quality. This study showed NIR and Raman spectroscopy with principal component analysis (PCA) was very effective for the blending processing control. It is of utmost importance to evaluate critical parameters related to quality of products during pharmaceutical processing. The blending is confirmed by off-line determination of active pharmaceutical ingredient (API) by a conventional method such as high performance liquid chromatography (HPLC) and UV spectroscopy. These analytical methods are time-consuming and ineffective for real time control. This study showed the possibility for the determination of blend uniformity end-point of CR tablets with the use of both NIR and Raman spectroscopy. The samples were acquired from six positions during blending processing with U-type blender from 0 to 30 min. Using both collected NIR and Raman spectral data, principal component analysis (PCA) was used to follow the uniformity of blending and finally determine the end-point. The variation of homogeneity of six samples during blending was clearly found and blend uniformity end-point was successfully confirmed in the domains of principal component (PC) scores.

• Journal of Sericultural and Entomological Science
• /
• v.17 no.2
• /
• pp.133-139
• /
• 1975

For developing the therapeutic agents to be administered orally for treating certain silkworm diseases and applying them to clinical conditions, vehicles suitable for the agents are needed. The author presumed that Lactose, Casein, and Urea, respectively, have an effectiveness as the vehicle. A series of experiments were carried out on these substances for conforming the applicability of the vehicles at the silkworm rearing house of the College of Agriculture, at Seoul National University during the spring silkworm rearing season of 1974 and the spring and autumn seasons of 1975. The author recognized, Lactose, Casein, and Urea, when put on the mulberry leaves in a powdered form, are eaten along with the leaves by silkworm. Thus, the systemic administration of them to silkworms are possible. The author administered these individual substances orally to silkworm larvae in doses of l0mg., 30mg., 50mg., and 100mg. per gram of the body weight of the silkworm larvae at intervals of once a day, once every two days, and once every three days for 15 days. This was carried out from the first day of the fourth instar to just before mounting. The influences of these substances on the growth of silkworm larvae and the cocoons made by the larvae were observed. The author found out after completing the experiment that Lactose had no effect on growth and cocoon formation. This was observed in all cases. Casein inhibited the growth of silkworms except in the case of administered doses of once every third day in whick the growth and the cocoons were normal but the administration of the agent brought considerably large numbers of abnormal cocoons in every case. Urea inhibited both the growth and the formation of tile cocoons in most cases. For the confirmation of the clinical effectiveness as the vehicles for some therapeutic agents, the three substances, Lactose, Casein, and Urea, will be investigated more closely for the mixing amounts needed and other pertinent data.