• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.241-244
• /
• 2009

We studied the optimization method of sensing part for measuring heart rate in wrist. In order to know optimum structure of sensing part, we measured the heart rate signal by changing the shape and size of sensor pad structure and the thickness of silicon. The shapes of structure using in experiment are Empty, Rectangle, Embossing, Length, Width. We were compared the amplitude of output signal about each shape when thickness of silicon pad is increasing from 0 to 7 mm by 1 mm.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2007.11a
• /
• pp.535-537
• /
• 2007

디스크는 내부의 정보를 최대한 숨기고 추상화하여 운영체제에 읽기와 쓰기같은 최소한의 인터페이스만을 제공한다. 결과적으로 상위 레이어의 소프트웨어는 디바이스에 대해 최소한의 가정만을 가지고 결정에 임할 수밖에 없으며 이는 여러가지 최적화에 걸림돌이 될 수 밖에 없다. 본 논문에서는 디스크가 제공하는 최소한의 인터페이스만을 가지고 내부 구조를 정확히 추측해 내는 기법을 소개한다. 기존에 SCSI 디스크에 대해 매핑 정보를 추출해내는 연구[1,2] 이미 존재했으나, 널리 사용되고 있는 ATA 디스크의 경우 이를 밝혀낸 논문은 알려진 바 없다. 이 논문에서는 ATA 뿐만 아니라 SCSI 디스크에서도 적용할 수 있는 더 빠르고 정확한 알고리즘을 제안하고, 실제 실험 결과를 제시하였다. 이러한 결과는 차후에 입출력 시스템을 최적화하는데 큰 도움을 줄 수 있을 것이라 여겨진다.

• Journal of Digital Convergence
• /
• v.11 no.10
• /
• pp.419-429
• /
• 2013

The Wireless sensor network(WSN) consisting of a large number of sensors aims to gather data in a variety of environments. The sensor nodes operate on battery of limited power. so, To extend network life time is major goals of research in the WSN. In this paper, we state the key point of a energy consumption with minimum&load balancing. The proposed protocol guarantee balance of number of cluster member nodes using the node memory threshold and optimization of distribution of cluster head using the optimized clustering method. The results show that the proposed protocol could support the load balancing and high energy efficiency by distributing the clusters with a reasonable number of member nodes. The simulation results show that our schme ensure longer life time in WSN as compare with existing schemes such as LEACH and CBLM.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.12
• /
• pp.120-127
• /
• 2008

HMIPv6 draws lots of attentions in recent years for providing an efficient handover and reducing the signaling overhead. HMIPv6 employs MAP(Mobility Anchor Point) in order to minimize a signaling overhead and a local mobility management. MAP completes an efficient mobility management in HMIPv6 network environment with frequent handover. However, HMIPv6 causes load concentration at a paricular MAP and may have unnecessary latency between HN(Mobile Node) and CN(Correspondent Node) within the same network. A MAP may also disturb the route optimization in HMIPv6 network because all packets must be transmitted through a MAP. In this paper, we propose a scheme to optimize the route in HMIPv6 networks according to MAP load. We configure a threshold in order to support the better service into MAP domain. The packets do not pass through MAP and are directly transmitted to AR(Access Router) if the number of current MNs attached to the MAP exceed the desired threshold. We simulate the performance of the proposed scheme and compare with HMIPv6. Resultly, the proposed scheme reduces signaling costs and mitigates concentration of a paticular MAP as well.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.4
• /
• pp.85-92
• /
• 2018

Reductions of the electricity charge are achieved by demand management of the load. The demand management method of the load using ESS involves peak shifting, which shifts from a high demand time to low demand time. By shifting the load, the peak load can be lowered and the energy charge can be saved. Electricity charges consist of the energy charge and the basic charge per contracted capacity. The energy charge and peak load are minimized by Linear Programming (LP) and Quadratic Programming (QP), respectively. On the other hand, each optimization method has its advantages and disadvantages. First, the LP cannot separate the efficiency of the ESS. To solve these problems, the charge and discharge efficiency of the ESS was separated by Mixed Integer Linear Programming (MILP). Nevertheless, both methods have the disadvantages that they must assume the reduction ratio of peak load. Therefore, QP was used to solve this problem. The next step was to optimize the formula combination of QP and LP to minimize the electricity charge. On the other hand, these two methods have disadvantages in that the charge and discharge efficiency of the ESS cannot be separated. This paper proposes an optimization method according to the situation by analyzing quantitatively the advantages and disadvantages of each optimization method.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.10
• /
• pp.319-330
• /
• 2016

Recently, 3D printing technology has been applied to make a concept model and working mockup of an industrial application. On the other hand, this technology has limited applications in industrial products due to the materials and reliability of the 3D printed product. In this study, the components of a full cord switch module are proposed as a case of a 3D printed component that can be used as a substitute for a short period. These are hub-driven and lever lockup components that have the structural characteristics of breaking down frequently in the emergency operating status. To ensure the structural strength for a substitute period, research of structure optimization was performed because 3D printing technology has a limitation in the materials used. After optimizing the structure variables of the hub-driven component, reasonable results can be drawn in that the safety factors of the left and right switching mode are 1.243 (${\Delta}153.67%$) and 3.156 (${\Delta}404.96%$). The lever lockup component has a structural weak point that can break down easily on the lockup-part because of a cantilever shape and bending moment. The rib structure was applied to decrease the deflection. In addition, optimization of the structural variables was performed, showing a safety factor of 7.52(${\Delta}26%$).

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.2 s.344
• /
• pp.88-93
• /
• 2006

In this paper, smaller load has been used compared with the conventional Doherty amplifier and PBG structure have been employed to suppress IMD (Inter-modulation Distortion) and improve PAE (Power Added Efficiency). And The PBG structure has been employed on the output macthing network of Doherty amplifier. The proposed power amplifier has been improved more the IMD3 by 5.5 dBc, and the average PAE by $5\%,$ at peak output power, $18\%$ at 8dB back-off point respectively than the conventional Doherty power amplifier.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.38 no.2
• /
• pp.16-26
• /
• 2001

This paper develops the fast dynamic programming technique to construct the subband structure yielding the maximum coding gain for given filter bases and a given limit of implementation complexity. We first derive the unified coding gain which can be applied to non-orthogonal filter basis as well as orthogonal filter basis and to arbitrary subband decompositions. Then, we verify that the unified coding gains in real systems are monotonically increasing function for the implementation complexities which are proportional to the number of subbands. By using this phenomenon, the implementation complexity and the coding gain are treated in the same way as the rate and distortion function. This makes it possible to use the Lagrangian multiplier method for finding the optimal subband decomposition producing the maximum coding gain [or a given limit of implementation complexity.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.30 no.4
• /
• pp.286-289
• /
• 2019

In this paper, we proposed a method to control input powers and receiver loads for maximum efficiency in multiple-input multiple-output(MIMO) wireless power transfer(WPT) systems. The input voltage ratio between transmitters and receiver loads for maximum transfer efficiency is derived in terms of figure of merits. The theoretically derived input voltages for the transmitters and optimum loads for the receivers were found to be similar to those obtained by a genetic algorithm. We demonstrate the effectiveness of the theory using a few design examples. Using the results obtained from this study, effective and simplified designs of MIMO WPT systems will be possible.

• The Journal of the Acoustical Society of Korea
• /
• v.29 no.1
• /
• pp.56-61
• /
• 2010

This paper describes optimization methods of acoustic models in HMM-based continuous speech recognition. Most of the conventional speech recognition systems use the same number of Gaussian mixture components for each HMM state. However, since the number of data samples available for each state is different from each other, it is possible to reduce the overall number of model parameters and the computational cost at the decoding step by optimizing the number of Gaussian mixture components. In this study, we introduced the Gaussian mixture weight term at the merging stage of Gaussian components in the minimum description length (MDL) based acoustic modeling optimization. Experimental results showed that the proposed method can obtain better ASR accuracy than the previous optimization method which does not consider the Gaussian mixture weight term.