• Journal of the Microelectronics and Packaging Society
• /
• v.25 no.3
• /
• pp.37-41
• /
• 2018

This paper presents the integrated fluorescent oxygen sensor probe module based on planner lightwave circuits using UV imprint lithography. The oxygen sensor system is consisted of the optical source part, optical detector part and optical sensing probe part to be composed of the planner lightwave circuit and oxygen sensitive thin film layer. Firstly, we optimally designed the planner lightwave circuit with asymmetric $1{\times}2$ beam splitter using beam propagation method. Then, we fabricated the planner lightwave circuits using UV imprint lithography process. This planner lightwave circuits transmitted the optical power with 76% efficiency and the fluorescence signal with 70% efficiency. The oxygen sensitive thin film layer is coated on the end face of planner lightwave circuit. The oxygen sensor system using this sensor probe module with planner lightwave circuit could measure the concentration with 0.3% resolution from 0% to 20% gas range. This optical oxygen sensor probe module make it possible to compact, simple and cheap measurement system.

• Journal of Labour Economics
• /
• v.40 no.3
• /
• pp.1-28
• /
• 2017

Using Korea Labor and Income Panel Surveys data, this paper estimates the effect of schooling level on income over time and the effect of children's education level on intergenerational income persistence. The results show that the impact of education level on income decreased over time. Also, intergenerational income persistence, measured as a dummy variable that has value one if children's income percentile group is same as the father's, increased with children's educational attainment only when the father is in upper income percentile groups. These findings indicate that education fails to play a significant role of the economic ladder and does not much help in raising intergenerational income mobility. Rather, education may possibly function as a means of intergenerational transmission of wealth through parental investment in their children's private education.

• Journal of Korean Society of Steel Construction
• /
• v.9 no.4 s.33
• /
• pp.479-487
• /
• 1997

The use of semi-rigid joints can be considered in the beam-to-column connections of buildings. The advantages of semi-rigid joints can be found in the convenience of construction and the ability of effective moment distribution of members. This study is a basic step to acertain the application of middle high rise buildings by using reformed T-stub, of which rotation capacity is thought to be excellent compared with that of existing T-stubs. The tests of tensile and compressive elements of reformed T-stubs were performed to investigate the behavior of reformed T-stubs. The beam-to-column connections using reformed T-stubs are tested under monotonic loading. The structural behaviors of reformed T-stubs were understood qualitatively and the possibility of application of semi-rigid connections with reformed T-stub was acertained.

• International Journal of Highway Engineering
• /
• v.10 no.4
• /
• pp.257-267
• /
• 2008

This study was conducted to investigate the stress distribution in the prestressed concrete pavement (PSCP) when the transverse post tensioning was applied. By performing the structural analyses using a finite element model of PSCP, the effect of anchor spacing and the relationship between the longitudinal and transverse post tensioning were evaluated. The analysis results showed that as the anchor spacing became smaller, the stresses were more uniformly distributed and the ranges of the stress losses were reduced; however, the economy should be considered. As the anchor spacing became larger, the difference between the average transverse stress and the transverse stresses at various locations such as shoulder, wheel pass, and center of the slab, increased. The transverse post tensioning induced the additional tensile forces in the longitudinal tendons, but the magnitude was negligibly small, and the longitudinal and transverse post tensioning could be designed independently. The use of the transverse stress distribution for the design of the post tensioning was also discussed in this paper.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.17 no.2
• /
• pp.89-96
• /
• 2011

A three dimensional ecological model(EMT-3D) was applied to Ulsan Bay for the simulation of Dioxins. The simulated results of dissolved Dioxins were in agreement with the observed values, with a correlation coefficient(R) of 0.7951 and a coefficient of determination($R^2$) of 0.6265. The results of sensitivity analysis showed that partition rate, adsorption rate and bioconcentration factor were important factors. Therefore, the parameters must be carefully considered in the modeling. In the case of 50% and 80% total loads reduction, concentration of dissolved Dioxins was shown to be lower than 0.150 and 0.250 pg WHD-TEQ/L, respectively.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.3
• /
• pp.567-575
• /
• 2011

The two most popular virtual machine allocation schemes, both match making and round robin, do consider hardware specifications such as CPU, RAM, and HDD, but not CPU usage, which results in balanced resource distribution, but not in balanced resource usage. Thus, in this paper a new virtual machine allocation scheme considering current CPU usage rate is proposed while retaining even distribution of node resources. In order to evaluate the performance of the proposed scheme, a cloud computing platform composed of three cloud nodes and one front end is implemented. The proposed allocation scheme was compared with both match making and round robin schemes. Experimental results show that the proposed scheme performs better in even distribution of overall CPU usage, which results in efficient load balancing.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.9 no.5
• /
• pp.457-466
• /
• 2004

In this paper, a modified converter is presented and analyzed to use as a photovoltaic converter. And also a new parallel driving scheme is proposed to increase output power and to reduce the output voltage ripple. The ratio of the output to the input voltage of the modified converter is equal to that of the boost converter. The difference between both converters is the composition of output terminal. Owing to the discrepancy, a working voltage of the output capacitor of the modified converter becomes lower, thus the capacitance value of the capacitor can be smaller than that of the boost converter. The proposed parallel driving is based on the modified converter and a current-mode-control method. It gives a good solution for alleviating the current sharing unbalance problem of conventional parallel operations. It reduces the output voltage ripple by means of increasing the equivalent switching frequency without additional switching losses. The validity of the proposed parallel driving strategy is verified through computer-aided simulations and experimental results.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.16 no.2
• /
• pp.31-39
• /
• 2012

Recently new construction and reconstruction of the bridge have been required to minimize traffic congestion, environmental disadvantage, to reduce the period of construction, and to improve the quality and workability during the construction. For this reason, the application of modular bridge system, which is assembly of the structural members, is necessary to prepare for near future. Fall of girders can occur at the moment to connect between precast girders during the construction, so appropriate cross beams should be installed to solve the mentioned problem. In this study, understanding the structural characteristics and domestic and international case of cross beam, alternative cross beam system for modular bridge was developed. To inspect the structural characteristics of the alternative system, specimens were built and static loading test was performed. Afterward, the behavior of cross beam interms of joints and load distribution was observed. Experimental results were analyzed and compared with each data. Therefore, the appropriate cross beam system for modular bridge will be chosen and proposed in this paper.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.2
• /
• pp.247-254
• /
• 2021

Problems such as a limited frequency resource and interference between adjacent bands have been continuously raised because of rapidly developing wireless technology and communication service. In order to solve that problem, government has been developed and operating the Spectrum Management Intelligent System(SMIS). This paper compares the results simulated by SMIS with the ATDI and the Matlab coded provided by ITU-R for verification of SMIS operating for the public interests. The Recommendation ITU-R P.526, P.1546, and P.1812 among the propagation model loaded in SMIS were chosen because of the relation to the broadcasting service. The comparison and analysis result shows that the outputs derived by SMIS has the small error of less than 1 dB. This research could be utilized for the policy establishment and R&D for the frequency allocation and the interference between adjacent bands.

• Korean Chemical Engineering Research
• /
• v.59 no.1
• /
• pp.106-111
• /
• 2021

In this study, an ultrasound-assisted micellar extraction process was developed to efficiently purify the anticancer substance paclitaxel from the plant cell Taxus chinensis. The problem of many extraction steps and long phase separation time in the traditional micellar process could be dramatically improved. The highest paclitaxel yield (~96%, extracted twice) was obtained at 180 W of ultrasonic power and 1.5 h of ultrasonic irradiation time, which was 24.7% higher than that of the traditional method. In addition, the partition coefficient (K) showed a maximum value (24.0) at 180 W of ultrasonic power and 1.5 h of irradiation time. There was no significant difference in the purity of paclitaxel, and the purity of initial paclitaxel (6.81%) increased to 22.0% after purification. Compared to the traditional method, the phase separation time of the back extraction decreased by 40.7-56.2% (ultrasonic power 80 W), 46.3-67.6% (ultrasonic power 180 W), and 51.9-67.6% (ultrasonic power 250 W), respectively. The phase separation time decreased as the ultrasonic power (80-250 W) and irradiation time (0.5-2.5 h) increased.