• The Transactions of the Korean Institute of Power Electronics
• /
• v.5 no.3
• /
• pp.215-220
• /
• 2000

본 논문에서는 SRM운전에서 맥동토오크와 부하토오크의 변화로 인한 속도변경을 줄이기 위해 동적 도통각 제어 원리를 이용한 PLL(Phase Locked Loop) 속도제어 방식을 채택하였다. SRM은 많은 장점을 가지고 있으나 토오크리플에 따른 속도변동으로 정밀한 속도제어에 어려움이 있다. SRM 구동 시스템에 PLL을 적용한 결과 전동기는 강인한 정속도 운전을 할 수 있으며, 또한 운전속도에 따라 선행각을 조정함으로서 고효율 구동을 할 수 있었다. 구성된 시스템은 운전속도와 부하의 변화에 따라 선행각이 증가함으로써 뛰어난 동적 속도제어 특성을 갖고 있으며, 인버터 인가전압을 제어하는 선행각을 조정함으로서 일정부하 영역에서 높은 효율특성을 가진다. SRM 구동 시스템의 PLL 속도제어와 고효율 구동을 위한 도통각제어를 위해 TMS320F240 DSP를 사용함으로서 디지털 제어기의 유연성과 소형화를 꾀하였다.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.5 no.1
• /
• pp.46-56
• /
• 1991

In this paper, the variable speed control of permanent magnet synchronous motor driven by a sinus¬oidal PWM inverter based on maximum torque sensitivity is presented. The developed torque or speed control is achieved by the field orientation technique. For the field orientation, the resolver is used as the rotor positioning sensor mounted on the motor shaft without pull-out of the synchonism at any speed. To show the validity of proposed control method, the simulation and experimental results are provided. The advantages of the proposed control method are to achieve the fast current and speed responses.

• Journal of Advanced Marine Engineering and Technology
• /
• v.17 no.2
• /
• pp.29-35
• /
• 1993

Recent marine propulsion diesel engines tend to become slower in speed and longer in stroke for the higher engine efficiency, and in these long stroke and slow speed engines the digital governors are highly recommended to be used. But, in the present digital governors only the feedback of the engine rpm-signal is used for the engine speed control. If the load torque of the engine can be measured or estimated and the torque feedback loop is added to the present digital governor, it is expected that the speed control performance of the digital governor will be highly improved. In this paper, a new method is proposed to estimate the load torque of the diesel engine from the measured signals of fuel oil and rpm. And it is also suggested that the Kalman filter can be used for the estimation of engine torque.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.11a
• /
• pp.272-276
• /
• 1996

This study deals with the speed control of an overcentered variable-displacement hydraulic motor on a constant pressure network, which is noted for its high system efficiency fast dynamic response and energy recovery capability. The speed control characteristics of the conventional cascade PI controller are largely affected by load-torque disturbances. To obtain robust speed control despite torque disturbances, the load torque is estimated by an observer based on a mathematical model and compensated for by a feedforward loop. It is shown by experiment that robust speed control may be obtained with the proposed controller. The experimental data agree fairly well with the theoretical analysis.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.1062-1064
• /
• 2000

본 논문은 위치 및 속도 검출기가 없는 매입형 영구자석 전동기(interior permanent magnet motor, 이하 IPMM)의 위치 제어 기법에 관한 것이다. IPMM은 기본적으로 자기적인 돌극성(magnetic saliency)을 가지고 있지만, 그것은 부하 조건에 의해 쉽게 변하는 특성을 가지고 있기 때문에 제어 성능이 쉽게 떨어질 수 있다. 본 논문에서는 기존의 방법과 같이 그 돌극성. 혹은 임피던스 차이를 이용한다. 하지만, 회전자 위치 정보를 나타내는 임피던스 차이를 극대화하고 어떤 부하 조건에서도 성능을 유지하기 위한 고주파 신호 주입 방법이 제안된다. 제안된 방법은 IPMM의 위치 및 속도 검출기가 없는 센서리스 제어를 가능하게 한다. 단위 전류 당 최대 토오크 제어도 제안한다. 제안된 방법을 위해 다양한 부하 조건에서 IPMM의 토오크와 고주파 임피던스 특성을 분석한다. 그 특성을 기본으로 하는 속도 및 위치 추정 방법을 제안한다. 제안된 방법은 회전자 위치와 관련된 고주파 임피던스 성분을 추출한다. 실험 결과를 통해 여러 부하 조건에서 제안된 방법의 성능을 확인하였다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.5
• /
• pp.847-854
• /
• 1989

Axial force of a V-belt CVT is investigated experimentally. The experimental results on speed ratio-torque-axial force show good agreement with the theoretical results that were obtained in the previous work. It is also found that torque capacity of the V-belt CVT increases as the axial force and the speed ratio increase. Impending slip which occurs at the maximum torque is determined via experiments for various speed ratios. Based on the impending slip region, and the theoretical curves for the speed ratio-torque-axial force relationship, an actual operating criteria for the V-belt CVT is obtained. It is suggested to use the actual operating criteria with the theoretical equations as a basic design formula for the V-belt CVT.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.5 no.4
• /
• pp.8-14
• /
• 1991

In this paper, the variable speed control of permanent magnet synchronous motor driven by a sinusoidal PWM inverter based on maximun torque sensitivity is presented. The developed torque or speed control is achieved by the field orientation technique. For the field orientation, the resolver is used as the rotor positioning sensor mounted on the motor shaft without pull-out of the synchonism at any speed. To show the validity of proposed control method, the simulation and experimental results are provided. The advantages of the proposed control method are to achieve the fast current and speed responses.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.3 no.4
• /
• pp.399-406
• /
• 1998

This paper proposes an instantaneous torque control method for the high performance SRM drive. In first, we e establish SRM model with the characte1istics of the torque. phase current and rotor position which were measured in t the experimental SRM. Based on this model. the reference torque waveform to minimize torque ripple is obtained by t the control of resultant torque considering phase torque overlap according to the variation of load and speed. And the r reference current waveform for the tracking of reference torque are decided. The control method for tracking the r reference current is used the delta modulation technique. The proposed method is validated by the comparing with S simulation and experimental results.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.2 no.2
• /
• pp.49-56
• /
• 1997

Switched Reluctance Motors(SRMs) have a considerable inherent torque ripple due to the driving characteristics of pulse current waveform and the nonlinear variation inductance profile. This paper describes a current shape characteristics to effect a torque ripple reduction, and one pulse mode switching control method is proposed to minimize torque ripple of a switched reluctance motor regardless of speed and load condition by regulating tow parameters, such as, advance angle and exciting voltage. The experiments are performed to verify the capability of proposed switching method on 6/4 salient type SRM.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.5
• /
• pp.60-70
• /
• 1989

In this paper, a new HTF(Harmonic torque function) which takes into account the phasor of harmonic current, and which represents torque ripple content of induction motor is proposed. Through experiments and computer simulations using direct-quadrature two axis model, the proposed HTF is proved to be valid. Applying this function, six-step, SPWM and TPWM pulse-amplitude-width-controlled inverters are evaluated and compared with each other. A good control strategy for PAWM inverters was chosen from the results. It turns out that TPWM is superior to SPWM in torqur ripple content and output voltage amplitude of fundamental wave and six-step is better than PWM when CR is 9.