• Proceedings of the KIEE Conference
• /
• 2004.04a
• /
• pp.46-48
• /
• 2004

본 논문에서는 유한 요소법과 등가회로법을 이용하여 윤곽 진동형 압전 변압기의 특성을 해석하였으며 이를 통해 얻어진 결과를 기반으로 매칭 임피던스와 전기 및 기계적 결합 계수를 계산하였다. 전력 소자로서 사용되는 압전 변압기는 부하 등 특정 목적에 부합하는 정확한 설계가 필요하기 때문에 다중 목적 함수를 갖는 진화 전략을 이용하여 형상 최적화를 수행하였다.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.36 no.4
• /
• pp.271-279
• /
• 2016

The objective of this study was to determine the effect of the moisture content and pellet mill type on the physical and chemical characteristics of Italian ryegrass (IRG) pellet. Moisture content of raw material significantly (p<0.05) affected IRG pellet formation. Moisture content at 25% was the best condition for IRG pellet formation in terms of shape, power load and temperature changes. The hardness of pellet was decreased when moisture content was increase. However, the hardness of pellet was not affected by pellet mill type. Moisture content at 30% dramatically (p<0.05) decreased the durability compared to moisture content at 25%. Dry matter content of IRG pellet was increased (p<0.05) after pelleting. Total count of microorganism was decreased in pellet due to pressure heat and moisture losses during the pelleting process. These results indicated that the proper moisture content of Italian ryegrass pelleting would be at 25%. In addition, Roll & flat die type would be more suitable than Ring die and Die & flat die type in IRG pelleting. Pelleting works would be beneficial for improving forage quality and long storage.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.45 no.6
• /
• pp.60-66
• /
• 2008

The operating voltage of Li/SOCl2 battery decrease immediately when we give a load battery stored for long time. It is called voltage delay. We cannot rapidly operate equipment at emergence situation because the voltage delays. So we have to overcome voltage delay. We reported the results improved voltage delay in this paper through the control of the carbon cathode forming density. It is the classic method in order to control of voltage delay that is coating polymer in the lithium surface or put in the additive to electrolyte. If the carbon cathode forming density decreases, the operating voltage of battery becomes to increasing because solution resistance of battery reduce.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.5
• /
• pp.65-71
• /
• 1998

This paper presents in-process compensation methodology to eliminate cutter runout and improve machined surface quality. The cutter runout compensation system consists of the micro-positioning mechanism with the PZT (piezo-electric translator) which is embeded in the sliding table to manipulate the radial depth of cut in real time. For the implementation of cutter runout compensation methodology. cutting force adaptive control was proposed in the angle domain based upon PI (proportional-integral) control strategy to eliminate chip-load change in end milling process. Micro-positioning control due to adaptive acuation force response improves the machined surface quality by compensation or elimination of cutter runout induced cutting force variation. This results will provide lots of information to build-up the precision machining technology.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.17 no.12
• /
• pp.1204-1209
• /
• 2005

In-situ measurement was made to evaluate chiller performance and thermal storage density of an ice thermal storage system. The system belonged to a big hotel and the measurement was conducted during late October. Owing to very small cooling load, the data logging was possible for a single thermal storage cycle. However, operation history of the chiller showed a relatively good spectrum of data for performance evaluation. COP and thermal storage density were calculated. The COP at full load was about 4.07, which was lower than $4.8\~6.4$ of new chillers. The measured storage density was about $10.9RT-h/m^3\;(=152MJ/m^3)$, which also was lower than a criterion of normal performance $(above\;13.0RT-h/m^3\;or\;181MJ/m^3)$. The study result provides technical basis for quantitative ESCO business scenario.

• Journal of Broadcast Engineering
• /
• v.28 no.1
• /
• pp.21-30
• /
• 2023

Computer-generated holography requires much more computation costs and memory space rather than image processing. We implemented the diffraction calculation with low-precision and mixed-precision floating point numbers and compared the processing time and quality of the hologram with various precision. We compared diffraction quality with double, single and bfloat16 precision. bfloat16 shows 5.94x and 1.52x times faster performance than double precision and single precision. Also, bfloat16 shows lower PSNR and SSIM and higher MSE than other precision. However, there is no significant effect on reconstructed images. These results show low precision, like bfloat16, can be utilized for computer-generated holography.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.12
• /
• pp.1135-1142
• /
• 2009

This study was carried out to investigate of aerobic granulation by using aerobic granular reactor. To make aerobic granular sludge in short period of time, we used polymer. In reactor, we have studied on physicochemical characteristics of particle size, density, and microbial secreting polymer depending on aerobic particle's formation. The results of running aerobic granular reactor with 3, 6, 9 $kg{\cdot}COD/m^3{\cdot}d$ of COD loading rate and 35 days reaction time showed that particle size were 3.6 mm, 4.3 mm, and 3.4 mm respectively. The settling velocities were 1.5 cm/s, 1.6 cm/s, and 1.2 cm/s respectively. The microbic growth rates were 0.12 $d^{-1}$, 0.135 $d^{-1}$, and 0.133 $d^{-1}$ respectively. The overall result of aerobic granular reactor showed that $6kg{\cdot}COD/m^3{\cdot}d$ of COD loading rate had optimal physicochemical characteristics.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.48 no.3
• /
• pp.6-12
• /
• 2011

Electric vehicles and robots are real-time distributed control systems composed of multiple drive subsystems using micro controller units. Each control subsystem should be modular, compact, power saving, interoperable and fault tolerable in order to be incorporated into the networked real-time distributed control system. Under the networked real-time distributed control the synchronization problem can be occurred to the position and orientation tracking control due to the load variance, mismatch and time delay between the multiple drive subsystems. This paper suggests two types of position synchronization control of the single link manipulators. One of them is composed of cross controller, Kalman filter and disturbance observer, and the other uses the generation of target trajectories to minimize the gradient vector of the scalar function which is composed of the sum of square errors between the reference input vector and the output vectors. The availability of the proposed control schemes is shown through the control experiments.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.426-426
• /
• 2015

무경운 농법은 경작지의 토양을 교란시키지 않고 작물을 재배하는 방법으로, 토양의 물리성 개선과 토양 침식 예방, 생산비 절감 등의 효과가 있어 전 세계적인 인정을 받고 있는 농업기술이다. 그러나 아직까지 무경운의 재배 지속 기간 등 많은 의문이 제기되고 있으며, 국내 환경조건에 맞는 실험적인 연구가 미흡한 실정이다. 이에 본 연구에서는 최적관리기법의 하나인 무경운(No-till)을 적용한 밭의 오염물질 저감효과를 장기적으로 살펴보고자 2011년부터 2014년까지 4년간의 모니터링을 실시하였다. 무경운 농법을 적용하기 위하여 동계피복작물(밀, 보리)을 재배작물 정식하기 전해 겨울에 파종하여 이듬해 6월 말 수확하였다. 이후 7월에서 8월 사이 재배작물(들깨, 무)을 정식하였다. 시비는 2011년에는 축산퇴비, 2012년에는 축산액비 그리고 2013년과 2014년에는 화학비료를 시비하였으며, 매년 경운과 무경운의 시비량은 동일하게 처리하였다. 유출 시험포의 면적은 $150m^2$(폭 5 m, 경사장 30 m)이며, 8개(경사도 3% 4개, 경사도 8% 4개)의 시험포를 조성하여 각각 2개씩 경운(관행)과 무경운을 적용하였다. 모니터링은 재배작물(들깨, 무) 정식 이후부터 작물 수확 전까지 강우사상에 대하여 이루어졌으며, 연구기간동안 총 13회의 강우 사상에 대하여 조사를 실시하였다. 경운대비 무경운 시험포의 평균 오염부하 삭감율을 분석한 결과 경사도 3% 시험포의 경우 BOD는 35.1%, $COD_{Cr}$은 37.4% 그리고 영양염류인 TN과 TP는 각각 36.9%와 33.5%가 삭감된 것으로 조사되었으며, 경사도 8% 시험포의 경우 BOD가 36.4%, $COD_{Cr}$은 45.8%, TN과 TP는 각각 45.5%와 40.6%가 삭감된 것으로 나타났다. 우리나라에서는 경운(관행) 농법이 영농관리 차원에서 대부분 이용되고 있으나, 본 연구 결과에 기초할 때 무경운 농법으로 영농할 경우 강우유출수 및 하천으로 유입되는 비점오염부하를 효과적으로 제어할 수 있을 것으로 기대된다.

• Journal of Environmental Impact Assessment
• /
• v.27 no.6
• /
• pp.704-716
• /
• 2018

The aim of this study is to examine the characteristics analysis of the discharge and water quality based on TPLMS (Total Pollution Load Management System) in the Jinwi River unit basin, and to propose a management plan by selecting the point that needs improvement of water quality in order to achieve the target water quality. We evaluated the discharge and water quality characteristics, statistical analysis, daily delivery load and daily delivery density, grade classification, for 14 total pollution load site's from 2014 to 2016 year in Jinwi river unit basin. The average discharge of Jinwi river unit basin is $22.411m^3/s$ and discharge of Hwangguji River is 32.8% and the water quality characteristics along the tributary river were clarified spatially. As the result, it was analyzed that Seongeun River is an indirect indicator of organic pollutants, Gwanri River is a seasonal factor, Osan River and Hwangguji River both affect water quality. Estimation of delivered pollutant loads at the HG-3 site was 6,470.4 BOD kg/day, 6,846.7 TN kg/day and delivered pollutant loads density increased to $220.9BOD\;kg/day/km^2$, $22.4TP\;kg/day/km^2$ at the HG-4 site. This result demonstrates that the total pollution load site needed to improve water quality of the Jinwi River unit basin was HG-3 site.