• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.19 no.3
• /
• pp.133-138
• /
• 2013

In this study, we developed cosmetic container's volume index to compare the packaging volumes of fundamental cosmetic types. Over 250 cosmetics used for this study were collected in Korean market. The written content volume and the outer volume of packaging were analyzed to establish volume index (Lcos) and a design guideline for cosmetic container. The allowable ranges, such as maximum, acceptable, and optimum ranges in the design process, were also determined using Lcos. About 37% of cosmetics were in optimum or acceptable ranges. A 15% of cosmetic packages was in maximum range for reducing their volumes. This cosmetic container's volume index may be a useful tool as a design guideline for cosmetic packaging development.

• Culinary science and hospitality research
• /
• v.19 no.3
• /
• pp.33-45
• /
• 2013

This study was conducted to evaluate the effect of substitution of the flour with coffee silver skin (at the levels of 0%, 3%, 5%, and 7%) on the characteristics of yellow layer cake. The specific gravity of batter increased significantly as the content of silver skin increased. The specific volume of cake decreased significantly as the content of silver skin increased. The volume index decreased significantly as the silver skin content increased, while the symmetry index and uniformity index were not influenced. It was found that control had the highest cake indexes. Texture analysis showed that control had the lowest hardness and highest springiness. Hardness value of cakes was increased by adding silver skin; however, the springiness value of cakes with silver skin decreased during storage. According to sensory evaluation, experiment groups scored the higher points in texture acceptance than control. Above all, SS5 scored the highest points in aroma, taste and SS3 scored the highest points in appearance and overall acceptance.

• Journal of Chest Surgery
• /
• v.40 no.1 s.270
• /
• pp.45-51
• /
• 2007

Background: Although echocardiography is usually used for quantitative assessment of left ventricular function, the recently developed 16-slice multidetector computed tomography (MDCT) is not only capable of evaluating the coronary arteries but also left ventricular function. Therefore, the objective of our study was to compare the values of left ventricular function quantified by MDCT to those by echocardiography for evaluation of its regards to clinical applications. Material and Method: From 49 patients who underwent MDCT in our hospital from November 1, 2003 to January 31, 2005, we enrolled 20 patients who underwent echocardiography during the same period for this study. Left ventricular end-diastolic volume index (LVEDVI), left ventricular end-systolic volume index (LVESVI), stroke volume index (SVI), left ventricular mass index (LVMI), and ejection fraction (EF) were analyzed. Result: Average LVEDVI ($80.86{\pm}34.69mL$ for MDCT vs $60.23{\pm}29.06mL$ for Echocardiography, p<0.01), average LVESVI ($37.96{\pm}24.52mL$ for MDCT vs $25.68{\pm}16.57mL$ for Echocardiography, p<0.01), average SVI ($42.90{\pm}15.86mL$ for MDCT vs $34.54{\pm}17.94mL$ for Echocardiography, p<0.01), average LVMI ($72.14{\pm}25.35mL$ for MDCT vs $130.35{\pm}53.10mL$ for Echocardiography, p<0.01), and average EF ($55.63{\pm}12.91mL$ for MOCT vs $59.95{\pm}12.75ml$ for Echocardiography, p<0.05) showed significant difference between both groups. Average LVEDVI, average LVESVI, and average SVI were higher in MDCT, and average LVMI and average EF were higher in echocardiogram. Comparing correlation for each parameters between both groups, LVEDVI $(r^2=0.74,\;p<0.0001)$, LVESVI $(r^2=0.69,\;p<0.0001)$ and SVI $(r^2=0.55,\;p<0.0001)$ showed high relevance, LVMI $(r^2=0.84,\;p<0.0001)$ showed very high relevance, and $EF (r^2=0.45,\;p=0.0002)$ showed relatively high relevance. Conclusion: Quantitative assessment of left ventricular volume and function using 16-slice MDCT showed high relevance compared with echocardiography, therefore may be a feasible assessment method. However, because the average of each parameters showed significant difference, the absolute values between both studies may not be appropriate for clinical applications. Furthermore, considering the future development of MDCT, we expect to be able to easily evaluate the assessment of coronary artery stenosis along with left ventricular function in coronary artery disease patients.

• Analytical Science and Technology
• /
• v.7 no.2
• /
• pp.233-236
• /
• 1994

To evaluate the emulsion stability indices of W/O emulsion system, we developed the simple and sensitive "VOLUMETRIC METHOD". This technique involved the first step of homogenizing the milk fat-water system with Ultra-turrax T25, then the volume of the added water phase was measured immediately. After quiescent incubation in test tubes at room temperature for a desired storage time, the bottom volume of the separated water layer was measured. And then "emulsion stability index(ESI)" was calculated by the following equation : $ESI=(1-V_s/V_a){\times}100$, where $V_a$ means the volume of the added water in the W/O emulsion and $V_s$ represents the volume of the separated water in the W/O emulsion for a desired storage time. The emulsion stability indices of W/O emulsion system at sorbitan trioleate, span 60, and tween 20 were $95.4{\pm}1.8$, $56.1{\pm}2.8$, and $41.6{\pm}2.2$ respectively. Furthermore, the differences between "VOLUMETRIC METHOD" and "Titus et al method" were less than 5.0 of ESI Value.

• Progress in Medical Physics
• /
• v.27 no.2
• /
• pp.93-97
• /
• 2016

In this study, we evaluate the effect of respiration on the dose distribution in patient target volume (PTV) during intensity-modulated radiation therapy (IMRT) and research methods to reduce this impact. The dose distributions, homogeneity index (HI), coverage index (CVI), and conformity index of the PTV, which is calculated from the dose-volume histogram (DVH), are compared between the maximum intensity projection (MIP) image-based plan and other images at respiration phases of 30%, 60% and 90%. In addition, the reducing effect of complication caused by patient respiration is estimated in the case of a bolus and the expended PTV on the skin. The HI is increased by approximately twice, and the CVI is relatively decreased without the bolus at other respiration phases. With the bolus and expended PTV, the change in the dose distribution of the PTV is relatively small with patient respiration. Therefore, the usage of the bolus and expended PTV can be considered as one of the methods to improve the accuracy of IMRT in the treatment of breast cancer patients with respiratory motion.

• The monthly packaging world
• /
• s.253
• /
• pp.45-49
• /
• 2014

• Journal of the korean academy of Pediatric Dentistry
• /
• v.33 no.3
• /
• pp.411-421
• /
• 2006

In children, during developing occlusion stage, many studies confirm a high prevalence of gingival inflammation. Prevention, early diagnosis and treatment of gingival and periodontal disease is important because by establishing excellent oral hygiene habits in children, the risk of periodontal disease can be on the decrease in adulthood. This study evaluated the gingival conditions of 50 children$(8.5{\pm}3.1years)$ and 20 $adults(26.1{\pm}3.3 years)$ receiving clinical examination and GCF test at the pediatric dentistry of Chonbuk national university hospital in Jeonju, Korea. I estimated children's and adult's gingival states by measuring gingival crevicular fluid(GCF) using Periopaper and $Periotron^{(R)}$ 8000, gingival index, plaque index, DMFT scale. The results were as follows : 1. There are no statistical differences of GCF volume among the groups of the primary dentition, tooth erupting stage, complete eruption stage(p>0.1). But mean value of GCF is highest at the tooth erupting stage. 2. Comparing with adults, children have higher mean value of GCF volume with statistical differences (p<0.001). 3. There is statistically positive relationship between volume of GCF and gingival index (GI), plaque index(PLI) in both adults and children(GI; r=0.394, PLI ; r= 0.642). 4. There is no relationship between GCF volume and dental caries, composite resin treatments (p>0.05). But There is statistically positive relationship between GCF and orthodontic treatments(p<0.001) 5. Primary dentition has higher mean value of DMFT than permanent dentition(p<0.001). But there is no statistical relationship between GCF and DMFT (p>0.1).

• Journal of the Korean Chemical Society
• /
• v.52 no.3
• /
• pp.217-222
• /
• 2008

We investigate the kinetics of diffusion-influenced catalytic reactions occurring in small reaction volume. From a simple exact model study, we find that the reaction rate coefficient decreases with the size of reaction volume. The explicit expression for the average reaction rate constant is presented, which can be regarded as a generalization of well-known Collins-Kimball rate constant into the reactions occurring in a small reaction volume. It turns out that the traditional diffusion influenced reaction dynamics is followed by a single exponential relaxation phase with a rate constant dependent on the reaction volume for the catalytic reactions occurring in small reaction volumes.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2009.06a
• /
• pp.150-151
• /
• 2009

수화성이 회복된 미분말에 시멘트를 10% 첨가하고 무수규산을 20 wt% 배합하여 제작한고화체가 방사성 고화체 압축강도 인수기준에 만족함과 동시에 부피증가를 최소로 할 수 있었고이 조건으로 ANS 16.1 방법에 준하여 고화체 침출 실험이 진행 중에 있다. 고화체의 압축강도 및 침출지수 모두 처분장 인수 기준에 만족할 경우 콘크리트 미분말 폐기물의 부피 증가를 최소화함은 물론 안정한 상태로 처분할 수 있을 것으로 예상된다.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.27-27
• /
• 2003

무가압침투법으로 제조된 부피분율 10~24% SiC, TiC, B$_4$C 탄화물 입자강화 7075 Al 합금 기지 복합재료의 건식 미끄럼 마멸거동을 강화입자의 종류, 크기 및 부피 분율을 변수로 연구하였다. 미끄럼 마멸 시험은 pin-on-disk 형태의 마멸 시험기를 사용하여, AISI 52100 베어링강을 상대재로 상온 대기 중에서 실시되었다. 마멸특성의 분석과 마멸기구의 규명을 위하여 마멸면과 마멸단면을 SEM, EDS를 이용하여 분석하였다. 제조된 복합재료의 압축 시험을 통하여 측정된 항복강도와 가공경화지수는 서로 반비례하였고, 각 시편간의 경도 차는 크지 않았다. 마멸 시험결과, 크기 및 부피 분율이 7$\mu\textrm{m}$ !0%인 SiC 입자로 강화된 복합재료를 제외하고, 전체 복합재료 시편은 7075 Al 기지 합금에 비해 낮은 마멸 속도를 보였다. 10N 이하의 저하 중에서는 강화상의 종류와 상관없이 복합재료는 낮은 마멸 속도를 보였고, 25N 이상의 고하중에서는 TiC 입자강화 복합재료가 가장 낮은 마멸 속도를, SiC 입자강화 복합재료가 가장 높은 마멸 속도를 나타내었다. 강화 입자의 크기 및 부피 분율이 동일한 경우 SiC 입자로 강화된 복합재료가 가장 낮은 내마멸성을 나타내었다. 강화상의 크기 및 부피 분율이 증가함에 따라 미소 마멸에서 격렬 마멸로의 천이 하중이 증가하였다.