• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2007.12a
• /
• pp.125-126
• /
• 2007

In this paper, the floating body with vertical plate is introduced with a study on the flow patterns and characteristics in around the floating body by using 2 frame particle tracking method. This paper introduce an analysis method to predict the characteristics if flow around the neighboring fields if Floating Body with vertical plate in order to investigate a high performance model. Flow visualization has conducted in a drcu1ating water channel by a high speed camera and etc. Flow phenomena according to turbulence intensity distribution and flow separation around the floating body with vertical plate were obtained by two-dimensional PIV system.

• The Korean Journal of Malacology
• /
• v.28 no.3
• /
• pp.187-196
• /
• 2012

Recently, for the purpose of constructing artificial ecosystem, the public aquarium and experimental mesocosm systems are receiving attention. To design and establish an aquarium and mesocosm system, there is need of several materials for simulating the environment, such as sediments, rocks, and plants. Expecially for sessile mollusks, there must be proper materials to which sessile invertebrates can adhere. Nowadays, many aquariums and mesocosm systems are using dead coral skeletons for sessile mollusks. This study was proceeded to have data on the effect of dead coral skeletons on water qualities with the experiment on the environmental factors. For this purpose, I made glass tank for experiment, chose two types of dead coral skeletons imported from the Indonesia and observed the change of water qualities and decomposition efficiency of TAN (total ammonia-nitrogen), nitrite ($NO_2{^-}$) and nitrate ($NO_3{^-}$). As a result, the lager the surface area was, the more TAN, nitrite and nitrate decomposition rate increased. In addition, coral skeletons covered with crustose algae and bacteria in the tank showed faster TAN, nitrite and nitrate removal rate and stabilization. Accordingly, this experiment suggested that dead coral skeletons could be used as a sub filter for the closed system as well as an adhering plate.

• Journal of Korean Society on Water Environment
• /
• v.20 no.6
• /
• pp.625-630
• /
• 2004

Granular media filtration is used almost universally as the last particle removal process in conventional water treatment plants. Therefore, superb particle removal efficiency is needed during this process to ensure a high quality of drinking water. However, every particle can not be removed during granular media filtration. Besides the pattern of particle attachment is different depending on physicochemical aspects of particles and suspension. Filtration experiments were performed in a laboratory-scale filter using spherical glass beads with a diameter of 0.55 mm as collectors. A single type of particle suspension (Min-U-Sil 5) and alum coagulation was used to destabilize particles. The operating conditions were similar to those of standard media filtration practice: a filtration velocity of 5 m/h. More favorable particles, i.e., particles with smaller surface charge, were well attached to the collectors especially during the early stage of filtration when zeta potential of particles and collectors are both negative. This selective attachment of the lower charged particles caused the zeta potential distribution (ZPD) of the effluent to move to a more negative range. On the other hand, the ZPDs of the effluent moved from more positive to less positive when the surface charge of particles was positive and this result was thought to be caused by ion transfer between particles and collectors.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.9 no.2 s.42
• /
• pp.29-36
• /
• 2005

The purpose of this study is to investigate the inelastic behavior of reinforced concrete bridge columns with unbonding of main reinforcements at plastic hinge region. A computer program, named RCAHEST (Reinforced Concrete Analysis in Higher Evaluation System Technology), for the analysis of reinforced concrete structures was used. Material nonlinearity is taken into account by comprising tensile, compressive and shear models of cracked concrete and a model of reinforcing steel. The smeared crack approach is incorporated. The effect of unbonding of main reinforcements at plastic hinge region has been also taken into account to model the concrete and reinforcing steel. The proposed numerical method for the inelastic behavior of reinforced concrete bridge columns with unbonding of main reinforcements at plastic hinge region is verified by comparison with reliable experimental results.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.1045-1048
• /
• 2008

Fiber reinforced polymer (FRP) usually exhibits inherent brittleness under tensile stress. Application of FRP tendons to concrete beam leads to undesirable flexural behavior due to limited ductility compared to prestressed concrete beam with steel tendons. It has been experimentally observed that partial improvement of flexural behavior can be achieved by releasing FRP tendons' strain by unbonding FRP tendons. In order to estimate and apply the degree of improvement to the design, reasonable yet practical model predicting flexural strength as well as overall flexural behavior of unbonded FRP prestressed concrete beam is needed. In this study, an elaborated model in describing curvature distributions and flexural strength at ultimate stage of unbonded FRP tendons is described. There have been close agreements on the flexural strength of the FRP prestressed concrete beam between the predictions by nonlinear computer program and by the model.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.6A
• /
• pp.1033-1039
• /
• 2006

The purpose of this study are to evaluated bond, flexural properties and control of plastic shrinkage cracking of crimped type synthetic fiber with amplitude 6 mm and height 1.8 mm reinforced cement based composites. Bond and flexural test were conducted in accordance with the JCI-SF 8 and JCI SF-4 standard, respectively. The plastic shrinkage cracking test was conducted for evaluating the effect of fiber in reducing shrinkage cracking in cement based composites. Test results indicated that the crimped typel synthetic fibers performed significantly better than the straight type fiber in terms of interface toughness and pullout load and the crimped type synthetic fibers improved the flexural toughness of concrete. Also, the increasing the crimped type synthetic fiber volume fraction from 0.00% to 1.00% improved the plastic shrinkage cracking resistance. Specially, the effect of control of plastic shrinkage cracking is excellent at the more than 0.5% fibre volume fraction.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.2A
• /
• pp.247-260
• /
• 2006

In this paper, an analytical method which can describe the structural behavior of prestressed concrete (PSC) bridges reinforced with the unbonded external tendon is developed. Since the unbonded external tendon is directly installed to the deviators while maintaining a straight configuration, it has a different deformation field from that of concrete and accompanies the secondary effect caused by the change of the primary eccentricity between concrete and external tendon. In advance, the friction slip at the deviators is also taken into consideration on the basis of the force equilibrium between the friction force and the driving force. Through correlation studies between experimental data and analytical results, it is verified that the proposed numerical model can effectively predict the structural behavior of PSC beam bridges with comparative precision.

• The Korean Journal of Pesticide Science
• /
• v.7 no.3
• /
• pp.159-168
• /
• 2003

With microtiter plate, the assay method was developed for detecting the fungicidal activity of new compounds against spore germination, spore adhesion and mycelial growth of Colletotrichum sp. JC24 cal1Sing red pepper anthracnose. Also, the effects of some commercialized fungicides on fungal development like above mentioned were investigated by measuring the optical density of mycelia grown into wells of microtiter plate. For the standardization of assay method, some factors, such as the treatment of MTT and/or propanol, inodulum density and incubation period, affecting on mycelial optical density were investigated. For obtaining precise and consistent mycelial optical density, it was necessary the treatment of MTT for 12 hrs and propanol for 1 hr. inoculum density adjusted to $1\times10^5$ spores/mL and incubation period for 36 hrs at $25^{\circ}C$. For fungicidal activities, 6 protective fungicides, 6 ones inhibiting sterol biosynthesis, and one inhibiting respiration were used in this study. While mancozeb, chlorothalonil and dithianon among 6 protective fungicides inhibited strongly spore germination, adhesion, and mycelial growth at $6.25{\mu}g/mL$, propineb, iminoctadine and fluazinam inhibited intermediately spore germination and mycelial growth at $100{\mu}g/mL$. Washing above 3 fungicides with new PD broth, their activity against spore adhesion decreased. With hexaconazole, tebuconazole and myclobutanil, the tendency of the activity against fungal differentiation of the early infection stage was similar to the latter group of protective fungicides, showing the decrease of the inhibitory activity against spore adhesion by washing 2 hrs after incubation. However, kresoxim-methyl inhibited spore adhesion distinctly, depending on the applied concentrations. Based on these results, it might be able to assess the fungicidal activity of many compounds against spore germination, adhesion and mycelial growth by the use of microtiter plate in vitro. Using the assay developed in this report, it was possible to investigate the inhibitory activity of some commercialized fungicides, too.

• The Journal of Korean Academy of Prosthodontics
• /
• v.58 no.4
• /
• pp.328-334
• /
• 2020

Clinical remounting of complete denture is performed to refine occlusal harmony in maxillo-mandibular relation. It has been reported that patients who used adjusted dentures with clinical remounting felt less complications such as pain and discomfort in mastication. The purpose of this study was to assess effects of clinical remounting with case series. Seven patients with existing complete prosthesis were included. Clinical remounting procedure was done through interocclusal relation recording. In addition, occlusal force was measured with pressure indicating sensor and occlusal contact areas were evaluated with photo occlusion analysis. Occlusal contact areas of prosthesis were enlarged, while bite pressure was not increased. Hit and slide phenomenon of prosthesis was reduced concurrently. Clinical remounting procedure improved denture stability and increased occlusal contact area. Therefore, clinical remounting should be considered.

• Food Science and Preservation
• /
• v.22 no.1
• /
• pp.19-26
• /
• 2015

Indole 3-carbinol (I3C), important component of cruciferous vegetables and its major acid-catalyzed metabolite, 3,3'-diindolylmethane (DIM) have been suggested to have an inhibitory effect on the tumor growth and metastasis. This study investigated the effect of DIM on the adhesion, migration and invasion of highly invasive PC3 and DU145 human prostate cancer cell lines. Cells were grown in Dulbecco's modified Eagle's medium (DMEM) supplemented with 3.0 g/L glucose, 3.7 g/L sodium bicarbonate and 10% fetal bovine and were incubated in a humidified incubator at $37^{\circ}C$ and 5% $CO_2$. DIM reduced the adhesion of PC3 and DU145 cells in a dose dependent manner. The pretreatment of PC3 cells with DIM reduced the adhesion dose dependantly, but inhibition was less effective than the treatment with DIM during the adhesion assay. The migration and invasion of PC3 and DU145 cells were reduced by DIM dose dependantly, and the inhibition of DIM was less effective in the DU145 cells than in the PC3 cells. The pretreatment of PC3 cells with DIM for 24 hr before the assay reduced invasion of PC3 cells by 37%. These results suggest that DIM inhibits adhesion, migration and invasion of the PC3 and DU145 cells and may be an effective antimetastatic therapy in addition to traditional chemotherapy.