KSCE Journal of Civil and Environmental Engineering Research (대한토목학회논문집)

Korean Society of Civil Engeneers (대한토목학회)
권호 표지
DOI QR코드

DOI QR Code

Bond, Flexural Properties and Control of Plastic Shrinkage Cracking of Crimped type Synthetic Fiber Reinforced Cement Based Composites

Crimped Type 합성섬유로 보강된 시멘트 복합재료의 부착, 휨 및 소성수축균열제어 특성

  • Received : 2006.06.22
  • Accepted : 2006.09.20
  • Published : 2006.11.29
Download PDF
⟨ Previous Next ⟩

Abstract

The purpose of this study are to evaluated bond, flexural properties and control of plastic shrinkage cracking of crimped type synthetic fiber with amplitude 6 mm and height 1.8 mm reinforced cement based composites. Bond and flexural test were conducted in accordance with the JCI-SF 8 and JCI SF-4 standard, respectively. The plastic shrinkage cracking test was conducted for evaluating the effect of fiber in reducing shrinkage cracking in cement based composites. Test results indicated that the crimped typel synthetic fibers performed significantly better than the straight type fiber in terms of interface toughness and pullout load and the crimped type synthetic fibers improved the flexural toughness of concrete. Also, the increasing the crimped type synthetic fiber volume fraction from 0.00% to 1.00% improved the plastic shrinkage cracking resistance. Specially, the effect of control of plastic shrinkage cracking is excellent at the more than 0.5% fibre volume fraction.

본 연구의 목적은 1.8 mm의 높이와 6 mm의 주기를 가지고 있는 crimped type 합성섬유로 보강된 시멘트 복합재료의 부착 및 휨특성과 소성수축균열제어 특성을 평가하는 것이다. 부착 및 휨 시험은 JCI SF-4 및 JCI SF-8에 의해서 실시하였고, 소성수축균열시험은 시멘트 복합재료의 소성수축균열의 감소에 영향을 미치는 섬유의 효과를 평가하기 위하여 실시하였다. 실험결과 crimped type 합성섬유는 직선형태의 섬유와 비교하여 부착하중 및 계면인성이 우수하였고, 콘크리트의 휨인성을 증가시켰다. 또한 crimped type 합성섬유는 섬유의 혼입율이 0.00%에서 1.00%로 증가함에 따라 소성수축균열 저항성이 증가하였다. 특히, 섬유의 혼입율이 0.50% 이상이 되면 소성수축균열 조절능력이 매우 우수하였다.

Keywords

References

  1. 원종필, 백철우, 이창수, 박찬기(2003) 구조용 합성섬유를 사용한 콘크리트 및 숏크리트의 역학적 특성, 대한토목학회논문집, 대한토목학회, 제23권 제4A호, pp. 665-671
  2. 원종필, 임동휘, 박찬기(2002) 구조용 합성섬유의 최적형상함수 결정, 한국콘크리트학회 논문집, 한국콘크리트학회, 제14권 제 4호, pp. 474-482
  3. ACI Committee 305 (1996) Hot weather concrete, American Concrete Institute, Farmington Hills, Michigan, U.S.A
  4. Balaguru, P. (1994) Contribution of fibers to crack reduction of cement composites the initial and final setting period, ACI Materials Journals, No. 91-M27, pp. 280-288
  5. Banthia N. and Gupta R. (2006) Influence of polypropylene fiber geometry on plastic shrinkage cracking in concrete, Cement and Concrete Research, In press
  6. Bentur, A. and Mindess, S. (1990) Fibre reinforced cementitious composites, Elsevier Applied Science, London, pp. 1-11
  7. Banthia, N. and Yan, C. (2000) Shrinkage cracking in polyolefin fiber reinforced concrete, ACI Materials Journal, Vol. 97, No. 4, pp. 432-437
  8. Grzybowshi, M. and Shah, S.P. (1991) Shrinkage cracking of fiber reinforced concrete, ACI Materials Journal, No. 87-M16, pp. 138-148
  9. Kraai, Paul P. (1985) A proposed test to determine the cracking potential due to drying shrinkage of cracking, Concrete Construction, Vol. 30, No.9, pp. 775-778
  10. Mindess, S., Francis, Y., and Darwin, D. (2003) Concrete, 2nd edition, Prentice Hall, NJ, U.S.A
  11. Mehta, P.K. and Monteiro, P.J.M. (2006) Concrete Microstructure, properties, and materials, third editions, McGraw-Hili, Inc., New York
  12. Najm, H. and Balaguru, P. (2002) Effect of large-diameter polymeric fibers on shrinkage cracking of cement composites, ACI Materials Journals, Vol. 99, No.4, pp. 345-351
  13. Naaman, A.E., Xia, Z., Hikasa, J.I., and Saito, T. (1999) Control of plastic shrinkage cracking of concrete with PVA fibers, Proceedings ofInternational Symposium on Infrastructure Regeneration and Rehabilitation, University of sheffield, U.K., June 28-July 2, pp. 371-385
  14. Uno, P.J. (1998) Plastic shrinkage cracking and evaporation formulas, ACI Materials Journal, Vol. 95, No.4, pp. 365-375
  15. Wongtanakitcharoen, T. (2005) Effect ofrandomly distributed fibers on plastic shrinkage cracking of cement composites, PhD thesis, Dept. of Civil engineering, Univ. of Michigan, U.S.A
  16. Won, J-P, Lim, D-H, and Park, C-G (2006) Bond Behavior and Flexural Performance of Structural Synthetic Fiber-Reinforced Concrete, Magazine ofconcrete research,Vol. 58, No.6, pp. 401-410 https://doi.org/10.1680/macr.2006.58.6.401
  17. Wang, K., Surendra, P. Shah, and Pariya Puaksuk (2001) Plastic shrinkage cracking in concrete materials influence of fly ash and fibers, ACI Materials Journals, No. 98-M49, pp. 458-464