• Electrical & Electronic Materials
• /
• v.6 no.6
• /
• pp.524-535
• /
• 1993

본 연구에서는 SF$_{6}$가스의 전자이동속도를 더블히트파이프 실험장치를 이용하여 유도전류법에 의해 실험적으로 측정하였다. 그리고 전자수송계수의 정량적인 산출은 볼츠만 수송 방정식의 Backward-Prolongation을 이용하여 계산하고 해석하였다. 이때 전자에너지 분포함수와 전리 및 부착계수를 구하고 운동량변환단면적을 결정하였다. 그리고 실험적으로 측정된 SF$_{6}$가스의 전자이동속도와 계산된 전자수송계수를 비교 검토하여 해석함으로서 절연체의 기초적인 물성자료로 사용할 수 있다.

• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.2345-2347
• /
• 2001

본 연구에서는 반도체형으로 생산된 가속도센서를 적용하여 거리를 측정하는데 있어 문제점에 대해 언급하고, bias drift error에 따른 적분 누적오차를 줄이기 위한 방법으로 random noise를 감소시키고 위치추정을 위한 데이터 융합에 가장 일반적으로 적용되는 Kalman Filter 알고리즘을 적용하여 가속도 데이터를 상대적 위치 데이터로 변환하여 거리측정에 적용하였다. 또한 가속도센서를 관절형 로봇에 부착시켜 실험하여 이동거리를 산출하는 실험을 수행하였다. 실험 결과 보상 알고리즘을 사용했을 때의 zero drift error과 누적오차가 감소됨을 알 수 있었다.

• Journal of the Korea Concrete Institute
• /
• v.20 no.1
• /
• pp.23-33
• /
• 2008

The moment redistribution in continuous reinforced concrete beams is very feasible phenomenon, by which the efficiency and the economy in designing reinforced concrete members can be enhanced. However, to understand the structural behavior by moment redistribution phenomenon, it is desirable to verify its mechanism experimentally considering tension stiffening effect, the relationship of moment redistribution and beam deflection, crack pattern, and effective stiffness. Six reinforced concrete continuous beam specimens were fabricated, and each specimen had a dimension of 250 mm $\times$ 350 mm and 7,000 mm long. The location of de-bonding was taken as the primary test parameter to investigate tension stiffening effect. The moment redistribution ratio of the specimens was different depending on the position of de-bonding, and in particular no moment redistribution was observed when de-bonding exist at both ends, the maximum negative moment region and the maximum positive moment region.

• Journal of the Korea Concrete Institute
• /
• v.21 no.3
• /
• pp.291-302
• /
• 2009

A compression lap splice can be calculated longer than a tension lap splice in high strength concrete according to current design codes. New criteria for the compression lap splice including the effects of concrete strength are required for practical purpose of ultra-high strength concrete. Characteristics of compression lap splice have been extensively investigated and main parameters are derived. In addition, an experimental study has been conducted with column specimens in concrete strength of 40 and 60 MPa. The strength of the compression lap splice consists of bond and end bearing and two contributors are combined. Therefore, combined action of bond and end bearing should be assessed. Compared with tension splices, concrete strength significantly affects the strength of compression splices due to short splice length and existence of end bearing. Test results show that the splice strength can be evaluated to be proportional to square root of compressive strength of concrete. The stress states of concrete surrounding spliced bars govern the strengths of bond and end bearing. Because the axial stress of the concrete is relatively high, the splice strength is not dependent on clear spacing. End bearing strength is not affected by splice length and clear spacing and is expressed with a function of the square root of concrete strength. The failure mode of specimens is similar to side-face blowout of pullout test of anchors and the strength of end bearing can be evaluated using the equation of side-face blowout strength. Because the stresses developed by bond in compression splices are nearly identical to those in tension splices, strength increment of compression splices is attributed to end bearing only.

• The korean journal of orthodontics
• /
• v.31 no.4 s.87
• /
• pp.459-465
• /
• 2001

The purpose of this study was to evaluate the feasibility of the combined use of paste resin with sealant as an adhesive of the indirect bonding. The resin bases made of light-cured resin were bonded to the bovine incisors at a distance of 0.0, 0.2 or 0.4 mm using the sealant only or the mixture of sealant and paste resin. Bond strength of each group was measured using universal testing machine. The results were as follows : 1. The bond strength was reduced in both groups as the distance between enamel surface and resin base increased. 2. The bond strength showed no statistical difference between two groups in case the distance between enamel surface and resin base was 0.0 mm. 3. In case the distance between enamel surface and resin base was 0.2 or 0.4 mm, the sealant with paste resin group showed significantly higher bond strength than the sealant only group. The results of the present study indicate that the use of paste resin with sealant may be desirable as an adhesive in indirect bonding, particularly in case a gap is suspected between enamel surface and resin base.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.4
• /
• pp.255-267
• /
• 2020

Under SLD conditions, due to the large size of droplets, physical phenomena such as wall-droplet interaction and deformation have a significant effect on the icing process. Accordingly, many studies have been conducted in order to computationally simulate SLD effects. As one of the efforts, post-processing method have been proposed to describe wall-droplet interaction effect, which modified collection efficiency using Wright model. However, since the model doesn't properly consider the wall condition, it still overestimated collection efficiency and impingement limit. To solve this problem, impingement areas were divided into 3 different regions, and the post-processing method was introduced with the new wall-droplet interaction model developed based on Bai and Gosman rebound model. In order to consider the effect of deformation, the most suitable model was selected by comparing the deformation models used in the various icing codes. As a result, the modified post-processing method showed improved accuracy in predicting the impingement limits and collection efficiency by further estimating mass flux loss due to rebound, and it was observed that the result was the closest to the experimental data when the deformation effect was included by using Wiegand model.

• Journal of dental hygiene science
• /
• v.18 no.2
• /
• pp.69-75
• /
• 2018

The purpose of our study is to compare the adhesion and biofilm formation abilities of isolates from water discharged from dental unit waterlines (DUWLs). Bacteria were isolated from a total of 15 DUWLs. Twelve isolates were selected for the experiment. To confirm the adhesion ability of the isolates, each isolate was attached to a glass coverslip using a 12-well plate. Plates were incubated at $26^{\circ}C$ for 7 days, and the degree of adhesion of each isolate was scored. To verify the biofilm formation ability of each isolate, biofilms were allowed to form on a 96-well polystyrene flat-bottom microtiter plate. The biofilm accumulations of all isolates formed at $26^{\circ}C$ for 7 days were identified and compared. A total of 56 strains were isolated from 15 water samples including 12 genera and 31 species. Of the 56 isolates, 12 isolates were selected according to the genus and used in the experiment. Sphingomonas echinoides, Methylobacterium aquaticum, and Cupriavidus pauculus had the highest adhesion ability scores of +3 among 12 isolates. Among these three isolates, the biofilm accumulation of C. pauculus was the highest and that of S. echinoides was the third-most abundant. The lowest biofilm accumulations were identified in Microbacterium testaceum and M. aquaticum. Most isolates with high adhesion ability also exhibited high biofilm formation ability. Analysis of adhesion and biofilm formation of the isolates from DUWLs can provide useful information to understand the mechanism of DUWL biofilm formation and development.

• Korean Journal of Food Science and Technology
• /
• v.52 no.6
• /
• pp.670-677
• /
• 2020

To prevent contamination by Campylobacter jejuni during chicken carcass processing, the effect of emulsifiers on C. jejuni inoculated on chicken skin was investigated using confocal laser scanning microscopy. Among the 8 emulsifiers (SWA-10D, L-7D, M-7D, S-1670, L-1695, P-1670, polysorbate 20, polysorbate 80) tested for antimicrobial activity by the paper disk method, 4 emulsifiers (L-7D, L-1695, polysorbate 20, polysorbate 80) were screened further. Emulsifier L-1695 showed the largest clear zone at a concentration of 200 mg/mL. The 4 emulsifiers subjected to primary screening were screened for heat and pH stability. In the contact surface test, emulsifier L-1695 showed the lowest log CFU/㎠ value on both stainless steel and ceramic surfaces. When emulsifier L-1695 was applied via general and electrostatic spray methods, the number of C. jejuni entrapped inside chicken skin follicles was significantly reduced in both methods. In conclusion, the emulsifier L-1695 could be employed as a microbial detachment agent in the chicken carcass processing industry.

• Journal of Intelligence and Information Systems
• /
• v.28 no.2
• /
• pp.57-74
• /
• 2022

Recently, artificial intelligence parking control systems have increased the recognition rate of vehicle license plates using deep learning, but there is a problem that they cannot determine vehicles with fake license plates. Despite these security problems, several institutions have been using the existing system so far. For example, in an experiment using a counterfeit license plate, there are cases of successful entry into major government agencies. This paper proposes an improved system over the existing artificial intelligence parking control system to prevent vehicles with such fake license plates from entering. The proposed method is to use the degree of matching of the front feature points of the vehicle as a passing criterion using the ORB algorithm that extracts information on feature points characterized by an image, just as the existing system uses the matching of vehicle license plates as a passing criterion. In addition, a procedure for checking whether a vehicle exists inside was included in the proposed system to prevent the entry of the same type of vehicle with a fake license plate. As a result of the experiment, it showed the improved performance in identifying vehicles with fake license plates compared to the existing system. These results confirmed that the methods proposed in this paper could be applied to the existing parking control system while taking the flow of the original artificial intelligence parking control system to prevent vehicles with fake license plates from entering.

• Korean Journal of Materials Research
• /
• v.6 no.1
• /
• pp.106-115
• /
• 1996

본 연구에서는 PET(PentaEthoxy Tanatalum:Ta(OC2H5)5) 유기금속 화합물 전구체를 사용하여 차세대 초고집적회로 제조시 고유전체 물질로 유망한 Ta2O5 박막을 열화학증착 방법에 의하여 증착하였다. 본 증착실험을 통하여 여러 가지 운속기체, 기판온도, 반응압력 등의 공정변수가 층덮힘에 미치는 영향을 고찰하였으며 Monte Carlo 전산모사 결과와 기판온도 변화에 따른 층덮힘 패턴의 변화에 대한 실험결과를 비교하여 부착계수를 산출하였다. 운송기체로는 N2, Ar, He을 바꿔가며 실험하였으며 He>N2>Artns으로 층덮힘이 양호한 것으로 나타났다. 이는 운송기체의 종류에 따라 운동량 확산도, 열 확산도, 물질 확산도 등의 이동현상 특성값들이 다르기 때문이라 생각된다. 기판온도의 증가는 운송기체의 종류에 관계없이 층덮힘을 악화시켰으며 도랑내부에서의 Knudsen 확산과 표면반응물의 탈착에 비해 표면반응이 보다 지배적인 역할을 담당함을 알 수 있었다. 또한 질소를 운송기체로 사용한 경우에 부착계수의 겉보기 활성화 에너지는 15.9Kcal/mol로 나타났다. 그리고 3Torr 이하에서 반응압력이 증가하는 반응압력이 증가하는 경우에는 물질 확산도의 감소 효과 때문에 층덮힘이 악화되었다. 본 연구결과 3Torr, 35$0^{\circ}C$에서 He 운송기체를 이용한 경우가 가장 우수한 층덮힘을 얻을 수 있는 최적 공정 조건임을 알 수 있었다.