• Culinary science and hospitality research
• /
• v.17 no.3
• /
• pp.181-190
• /
• 2011

This study analyzed the quality characteristics of the Sansapyun products, which were manufactured by mixing with 0, 5, 10, 20, and 30% of Crataegi fructus concentrate and 9% of mung bean starch. The moisture content and pH in Sansapyun decreased significantly(p<0.001) as the concentration of Crataegi fructus concentrate increased. Sweetness increased as the amount of Crataegi fructus concentrate increased in both Before/After cases. As for the L value of the color characteristics of Sansapyun, it turned out that the control group, which had 0% of Crataegi fructus concentrate, was higher. Meanwhile, the a and b values were the strongest with 30% of Crataegi fructus concentrate. As the concentration increased, the hardness, springiness, chewiness, gumminess, cohesiveness all decreased significantly(p<0.001), while adhesiveness became higher as the concentration increased. The preference test showed that the increase of the concentration resulted in the increase of red color, fruity flavor, sour flavor, Chinese (herb) medicine flavor, sour taste, sweetness, Chinese (herb) medicine taste, stickiness, and aftertaste. However, the sleekness, transparency, hardness and springiness decreased as the concentration increased. The survey on the preference showed that the preferences for flavor, taste and overall preference were the highest at the 10% sample group, but the preferences for color and texture were the highest at the 20% sample group.

• Korean Journal of Poultry Science
• /
• v.38 no.3
• /
• pp.197-204
• /
• 2011

To investigate the effects of Cordyceps ochraceostromat, silkworm cocoon and conjugated linoleic acid (CLA) addition on the quality of cremi during storage, this study was conducted. Cremis were prepared using a 20% spent layer breast recovered protein to replace Alaska pollack with the addition of 0.1% silkworm cocoon powder (T1), 0.05% silkworm cocoon powder + 0.05% Cordyceps ochraceostromat powder (T2), and 0.05% silkworm cocoon powder + 0.05% CLA. All manufactured cremis were vacuum-packaged, stored at $10{\pm}1^{\circ}C$ and finally evaluated for their quality on 0, 2, 4 and 6 weeks of storage. The pH, whiteness, gel strength and breaking force of cremis from T2 were higher than those of samples derived from either T1 or T3. However, cremis from T2 showed low shear force values when compared to other cremis (p<0.05). Therefore, the results indicate that cremis contained 0.05% silkworm cocoon powder and 0.05% Cordyceps ochraceostromat combination (T2) may be recommendable to induce customers to buy, thereby, it may be beneficial to both manufacturers and consumers in market.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.3
• /
• pp.1356-1366
• /
• 2011

The TPM(Trusted Platform Module) is a hardware chip to support a trusted computing environment. A rightful user needs a command authorization process in order to use principal TPM commands. To get command authorization from TPM chip, the user should perform the OIAP(Object-Independent Authorization Protocol) or OSAP(Object-Specific Authorization Protocol). Recently, Chen and Ryan alerted the vulnerability of insider attack on TPM command authorization protocol in multi-user environment and presented a countermeasure protocol SKAP(Session Key Authorization Protocol). In this paper, we simulated the possibility of insider attack on OSAP authorization protocol in real PC environment adopted a TPM chip. Furthermore, we proposed a novel countermeasure to defeat this insider attack and improve SKAP's disadvantages such as change of command suructures and need of symmetric key encryption algorithm. Our proposed protocol can prevent from insider attack by modifying of only OSAP command structure and adding of RSA encryption on user and decryption on TPM.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.3
• /
• pp.141-146
• /
• 2018

Recently, location recognition technology has attracted much attention, especially for locating people or objects in an indoor environment without being influenced by the surrounding environment GPS technology is widely used as a method of recognizing the position of an object or a person. GPS is a very efficient, but it does not allow the positions of objects or people indoors to be determined. RFID is a technology that identifies the location information of a tagged object or person using radio frequency information. In this study, an RFID system is constructed and the position is measured using tags. At this time, an error occurs between the actual and measured positions. To overcome this problem, a neural network is trained using the measured and actual position data to reduce the error. In this case, since the number of read tags is not constant, they are not suitable as input values for training the neural network, so the neural network is trained by converting them into center-of-gravity inputs and median value inputs. This allows the position error to be reduce by the neural network. In addition, different numbers of trained data are used, viz. 50, 100, 200 and 300, and the correlation between the number of data input values and the error is checked. When the training is performed using the neural network, the errors of the center-of-gravity input and median value input are compared. It was found that the greater the number of trained data, the lower the error, and that the error is lower when the median value input is used than when the center-of-gravity input is used.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.11
• /
• pp.740-745
• /
• 2020

To calculate the reasonable design temperature load of a concrete box girder bridge, one bridge test specimen was made. The temperature gauges installed on the bridge test specimen measured 48 sets of temperature per day at 30-minute intervals during the summer and winter periods of one year. The temperature measured at each station was treated statistically to calculate the trend line and standard error, and the temperature distribution and trend line at the representative station were presented. The maximum effective temperature and the lowest effective temperature were calculated from the air temperature suggested by Euro code. The maximum effective temperature was calculated to be 1.5 to 2℃ higher than the Euro code at 35℃ and above. In comparison, the lowest effective temperature was 0.5 to 1.1℃ lower at -13℃ to-19℃. Compared to the effective temperature of this study according to the highest and lowest 50-year frequency of the Yangsan region, the highest effective temperature was 4.7℃ higher, and the lowest effective temperature was 4.5℃ lower. Considering the increasing climate change and reflecting the results of this analysis, it is deemed necessary to make the current temperature design standards larger.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.21 no.1
• /
• pp.53-61
• /
• 2013

The characteristics of methane production from pig manure slurry was investigated using anaerobic digestor combined with compost filtration bed. In this study, raw pig manure slurry was digested in mesophilic rectangular digester (effective volume $250m^3$) for 25 days and anaerobic digestion wastewater was filtered through compost filtration bed, which is composed of double layer, sawdust and chaff. The characteristics of anaerobic digestion wastewater were BOD 1,800 mg/L, COD 3,500 mg/L, SS 11,800 mg/L, T-N 1,200 mg/L and T-P 350 mg/L. After the filtration process, the contents of BOD, COD, SS, T-N and T-P of the anaerobic digestion wastewater were reduced by 97%, 62%, 89%, 39% and 57%, respectively. The concentrations of N, $P_2O_5$, and $K_2O$ of the leachate were 1,024, 111 and 407 mg/L, respectively. However, there was no odor emitted from the leachate.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.31 no.4
• /
• pp.382-390
• /
• 2011

Smart sensors embedable in composite wind turbine blades have been required to be researched for monitoring the health status of large wind turbine blades during real-time operation. In this research, the feasibility of packaged FBG sensor probes was studied through the experiments of composite blade trailing edge specimens in order to detect cracking and debonding damages. The instants of cracking and debonding generated in the shear web were confirmed by rapid changes of the wavelength shifts from the bare FBG sensor probes. Packaged FBG sensor probes were proposed to remove the fragile property of bare FBG sensor probes attached on composite wind blade specimens. Strain and temperature sensitivity of fabricated probes installed on the skin of blade specimen were almost equal to those of a bare FBG sensor. Strain sensitivity was measured to be ${\mu}{\varepsilon}$/pm in a strain range from to 0 to 600 ${\mu}{\varepsilon}$, and the calculated temperature sensitivity was to be 48 pm/$^{\circ}C$ in the heating test up to 80 degree.

• Korean Journal of Animal Reproduction
• /
• v.18 no.2
• /
• pp.141-150
• /
• 1994

Morphological features of the interaction between the hatching blastocyst and implantation in pig were studied by electron microscopy. The observations extended from late blastocyst stage to the completion of trophoblastic erosion of the epithelium and early decidual transformation of the epithelium and early decidual transformation of the stromal cells. Between day 7 and 17 of pregnancy, blastocysts from 0.3 to 12 mm in diameter were flushed from the uterine horns of Dutch Landrace pigs. On the 7th of development in the pig blastocyst, the blastocyst shedded of the zona pellucida established the tips of microvilli and with bleb-like cytoplasmic protrusions of the epithelial cells. From day 11 on in pig embryo, the bilayered trophoblast undergoes a dramatic phase of elongation so that the initially spherical expanded blastocyst becomes tubular. In pig, close apposition to the uterine wall beg-ins at about 12 $^1$/$_2$ days and then attachment occurred during the afternoon of the 16th or 18th day post coitum. At this stage, embryonic loss compared with corpus luteum number is up to 40% of ovulated oocytes. Therefore, the implantation failture of these embryos may be mainly caused by morphological abnormality and failture of zona shedding.

• Journal of Dairy Science and Biotechnology
• /
• v.37 no.4
• /
• pp.223-236
• /
• 2019

This study aimed to investigate the physiological characteristics and anti-diabetic effects of Lactobacillus plantarum KI69. The α-amylase and α-glucosidase inhibitory activity of L. plantarum KI69 was 91.17±2.23% and 98.71±4.23%, respectively. The propionic, acetic, and butyric acid contents of the MRS broth inoculated with L. plantarum KI69 were 8.78±1.12 ppm, 1.34±0.07% (w/v), and 0.876±0.003 g/kg, respectively. L. plantarum KI69 showed higher sensitivity to penicillin-G, oxacillin, and chloramphenicol among 16 different antibiotics and showed the highest resistance to ampicillin and vancomycin. The strain showed higher β-galactosidase, β-glucosidase, and N-acetyl-β-glucosaminidase activities than other enzymes. Additionally, it did not produce carcinogenic enzymes, such as β-glucuronidase. The survival rate of L. plantarum KI69 in 0.3% bile was 96.42%. Moreover, the strain showed a 91.45% survival rate at pH 2.0. It was resistant to Escherichia coli, Salmonella Typhimurium, Listeria monocytogenes, and Staphylococcus aureus with the rates of 15.44%, 50.79%, 58.62%, and 37.85%, respectively. L. plantarum (25.85%) showed higher adhesion ability than the positive control L. rhamnosus GG (20.87%). These results demonstrate that L. plantarum KI69 has a probiotic potential with anti-diabetic effects.

• Journal of Biomedical Engineering Research
• /
• v.25 no.4
• /
• pp.269-275
• /
• 2004

Different biological tissues have different values of electrical resistivity. In EIT (electrical impedance tomography), we try to provide cross-sectional images of a resistivity distribution inside an electrically conducting subject such as the human body mainly for functional imaging. However, it is well known that the image reconstruction problem in EIT is ill-posed and the quality of a reconstructed image highly depends on the measurement error. This requires us to develop a high-performance EIT system. In this paper, we describe the development of a 16-channel digital EIT system including a single constant current source, 16 voltmeters, main controller, and PC. The system was designed and implemented using the FPGA-based digital technology. The current source injects 50KHz sinusoidal current with the THD (total harmonic distortion) of 0.0029% and amplitude stability of 0.022%. The single current source and switching circuit reduce the measurement error associated with imperfect matching of multiple current sources at the expense of a reduced data acquisition time. The digital voltmeter measuring the induced boundary voltage consists of a differential amplifier, ADC, and FPGA (field programmable gate array). The digital phase-sensitive demodulation technique was implemented in the voltmeter to maximize the SNR (signal-to-noise ratio). Experimental results of 16-channel digital voltmeters showed the SNR of 90dB. We used the developed EIT system to reconstruct resistivity images of a saline phantom containing banana objects. Based on the results, we suggest future improvements for a 64-channel muff-frequency EIT system for three-dimensional dynamic imaging of bio-impedance distributions inside the human body.