• The Journal of Korean Society for Radiation Therapy
• /
• v.27 no.1
• /
• pp.87-95
• /
• 2015

Purpose : This study presents the usefulness assessment of secondary shield for the lens exposure dose reduction during radiation treatment of peripheral orbit. Materials and Methods : We accomplished IMRT treatment plan similar with a real one through the computed treatment planning system after CT simulation using human phantom. For the secondary shield, we used Pb plate (thickness 3mm, diameter 25mm) and 3 mm tungsten eye-shield block. And we compared lens dose using OSLD between on TPS and on simulation. Also, we irradiated 200 MU(6 MV, SPD(Source to Phantom Distance)=100 cm, $F{\cdot}S\;5{\times}5cm$) on a 5cm acrylic phantom using the secondary shielding material of same condition, 3mm Pb and tungsten eye-shield block. And we carried out the same experiment using 8cm Pb block to limit effect of leakage & transmitted radiation out of irradiation field. We attached OSLD with a 1cm away from the field at the side of phantom and applied a 3mm bolus equivalent to the thickness of eyelid. Results : Using human phantom, the Lens dose on IMRT treatment plan is 315.9cGy and the real measurement value is 216.7cGy. And after secondary shield using 3mm Pb plate and tungsten eye-shield block, each lens dose is 234.3, 224.1 cGy. The result of a experiment using acrylic phantom, each value is 5.24, 5.42 and 5.39 cGy in case of no block, 3mm Pb plate and tungsten eye-shield block. Applying O.S.B out of the field, each value is 1.79, 2.00 and 2.02 cGy in case of no block, 3mm Pb plate and tungsten eye-shield block. Conclusion : When secondary shielding material is used to protect critical organ while irradiating photon, high atomic number material (like metal) that is near by critical organ can be cause of dose increase according to treatment region and beam direction because head leakage and collimator & MLC transmitted radiation are exist even if it's out of the field. The attempt of secondary shield for the decrease of exposure dose was meaningful, but untested attempt can have a reverse effect. So, a preliminary inspection through Q.A must be necessary.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.14 no.1
• /
• pp.151-159
• /
• 2006

In these days, the importance of sludge treatment is emerging due to the London Convention, so this study was conducted to propose the alternatives for the improved sludge treatment on the organic wastewater and sewage sludge with JAR test and settling column equipped with stirrer. The minimum coagulant dosage to earn the optimum sludge settling efficiency resulted from 200mg/l and each critical sludge settling interface showed no distinct difference when PAC was dosed over 200mg/l. Accordingly, Clarification Rate(CR) with 200mg/l dosage was calculated to CR=(Ho-Ht) / Ho=1-0.4=0.6 because the critical sludge settling height stopped at 0.4. The settling velocity of sludge interface was decreased with the increase of MLSS concentration but rather increased with MLSS concentration over 1,000mg/l. This resulted from positive effect of interacted coagulation for floc formation by transfer to the zone of compressed settling when MLSS concentration increased over 1,000mg/l. The settling velocity of sludge interface showed $28.66{\times}10^{-3}/min$ for average settling velocity of sewage sludge which is 6.7 times higher than $4.25{\times}10^{-3}/min$ for average settling velocity of organic wastewater sludge. The increasing rate of CR for organic wastewater activated sludge was higher than that of settling velocity under 200mg/l of PAC dosage but settling velocity was higher than CR over 200mg/l of PAC dosage. However, in case of sewage sludge, the differential rate of CR was low when PAC dosage was increased but the settling velocity was suddenly increased with over 200mg/l dosage. Therefore coagulation effect was more efficient to MLSS settling velocity rather than SS removal effect in the supernatant.

• Clean Technology
• /
• v.19 no.3
• /
• pp.264-271
• /
• 2013

In this study, we optimized the removal condition of contaminants attached on the scrap surface to recycle the scrap generated from the Zr alloy tube manufacturing process back to the nuclear grade. The main contaminant is remnant of watersoluble cooling lubricant that is used in the pilgering manufacture during the tube production, and it is assumed to be compressed and carbonized on the surface of tube. Zirlo alloy tube of ${\phi}9.50mm$, which has high occurrence frequency of scrap, was selected as the object to be cleaned, and cleaning abilities of reagents were evaluated by measuring the characteristics of contaminants remained and by analyzing the surface of the tube after cleaning process. For evaluation of each cleaning agent, we selected two types of sodium hydroxide series and three types of potassium hydroxide series. Furthermore, to confirm dependence on tempe-rature and ultrasonic intensities, cleaning at the room temperature, $40^{\circ}C$, and $60^{\circ}C$ was conducted, and results showed that higher the cleaning temperature and higher the ultrasonic intensity, better the cleaning effect. As a result of the bare-eye inspection, while the use of sodium hydroxide provided satisfactory condition on the tube surface, the use of potassium hydroxide series provided satisfactory condition on the tube surface only when the ultrasonic intensity was over 120 W. In the cleaning effect analysis using the gravimetric method, cleaning efficiency of sodium hydroxide series was as high as 97.6% ($60^{\circ}C$, 120 W), but since the tube surface condition was poor after the use of potassium hydroxide, the gravimetric method was not appropriate. In the analytical result of surface contaminants on the tube surface, C, O, Ca, and Zr were detected, and mainly C and O dominated the proportion of contaminants. It was also found that the degree of cleaning on the tube affected the componential ratio of C and O; if the degree of cleaning is high, or if cleaning is well-conducted, the proportion of C is decreased, and the proportion of O is increased. Based on these results, optimal cleaning for application in the industry can be expected by categorizing cleaning process into three steps of Alkali cleaning, Rinsing, and Drying and by adjusting cleaning parameters in each step.

• The Korean Journal of Food And Nutrition
• /
• v.22 no.3
• /
• pp.321-331
• /
• 2009

In this study, Salvia miltiorrhiza Bunge(Danshen) powder was extracted with ethanol, and its antimicrobial activity was investigated. The ethanol extract of the Danshen had antimicrobial activity against Bacillus subtilis, Escherichia coli, and Staphylococcus aureus. The inhibition zones of the Danshen extract(3 mg/disc) against B. subtilis, E. coli and S. aureus were 13, 12 and 8.5 mm, respectively. To test the food preservation effect of Danshen and determine the optimal ratio of the Danshen extract in a formulation, Sulgidduk samples were prepared with substitutions of 0, 0.25, 0.5, 0.75 and 1% Danshen extract, and then their quality characteristics were investigated over 4 days of storage. According to the results, total cell counts showed a decreasing trend with an increasing amount of added Danshen extract. Moisture contents were not significantly different among the Sulgidduk samples. As the content of Danshen extract increased, the L-values of samples decreased and the a- and b- values increased. For the textural characteristics, the hardness, gumminess, and chewiness of the Sulgidduk samples decreased as the amount of Danshen extract increased; however, they increased with the progression of storage time. In the sensory evaluation, the control group had significantly higher scores for color, flavor and after-taste as compared to the Danshen extract-added groups. With increasing Danshen extract contents, flavor and overall acceptability decreased, while Danshen flavor, bitterness and off-flavor increased. Chewiness was not significantly different among the samples. In conclusion, the results indicate that substituting 0.5% Danshen extract in Sulgidduk is optimal for quality and provides a product with reasonably high overall acceptability.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.1141-1151
• /
• 2007

In this paper through Honam high-speed railroad which is planned with the north and south axis, we will verify the feasibility of the coordinate conversion using railroad control points after regarding current planned-railroad as the linear central axises. From analysis, distortion of Y axis varies 21cm to 40cm diminishing to a gentle straight line, distortion of X axis varies 14cm to 29cm. Through a revision, the deviation value between the coordinates were 6mm to 9mm and it satisfied the allowable error of national geographic information institute which is following ITRF (International Terrestrial Reference Frame) and cadastral boundary survey(10cm). consequently the coordinate conversion is possible using railroad control points as common control points.

• Journal of Periodontal and Implant Science
• /
• v.30 no.2
• /
• pp.241-257
• /
• 2000

Autogenous periosteal grafts are an attractive alternative to existing barrier membrane materials since they meet the reqiurements of an ideal material. But no histological data are available on the effectiveness of periosteal membranes in the treatment of periodontal defects. The purpose of this study was to evaluate effect of autogenous periosteal graft on periodontal regeneration histologically. Class II furcation defects were surgically created on the second, third and the fourth premolars bilaterally in the mandibules of six mongrel dogs. The experimental sites were divided into three groups according to the treatment modalities; control group - surgical debridement only; Group I- autogenous periosteal membrane placement after surgical debridement; Group II-autogenous periosteal membrane placement after surgical debridement and bone grafting. The animals were sacrificed at 2, 4 and 12 weeks after periodontal surgery and the decalcified and undecalcified specimens were prepared for histological and histometrical analysis. Clinically all treated groups healed without significant problems. Under light microscope, at 2 weeks, control group showed significant apical epithelial migration and bone remodelling only below the notch area. But for the group I, II with autogenous periosteal graft, less apical migration of epithelium appeared and large amount of osteoid tissue showed above the notch area. Grafted periosteal membrane was indiscernable at 4 weeks, so periosteal membrane might be organized to surrounding tissues. Histometrically, at 4 and 12 weeks, all the test and control groups didn't show significant change of epithelial zone but new attachment level tended to be gained in the test groups than control group. These results suggest that autogenous periosteal grafts should be a good alternative for guided tissue regeneration.

• Childhood Kidney Diseases
• /
• v.1 no.2
• /
• pp.155-160
• /
• 1997

Purpose : Tethered cord syndrome is characterized by progressive motor and sensory disturbances in lower extremities, foot deformities caused by a pathologic fixation of spinal cord resulting in excessive stretching of the spinal cord. It is also frequently associated with urological symptoms include urinary frequency, incontinence, enuresis, urgency and recurrent urinary tract infection. Because there is few report in the literature about urological manifestations of theterd cord syndrome, we conducted a retrospective study on the patients diagnosed as tethered cord syndrome to delineate the characteristics of urologic manifestations in tethered cord syndrome and to establish the policy to evaluate patients who is suspected of tethered cord syndrome. Method : A retrospective study was conducted by reviewing the medical records of nine patients who was diagnosed as tethered cord syndrome from November 1991 to July 1996 in Yeungnam University Hospital. Result : 1) The age distribution of nine patients was as follows; 5 patients were under 2 years, 1 case from 2 to 6 years and 3 cases from 6 to 10 years. 2) Of 9 patients 6 had voiding frequency, urinary incontinence, enuresis, urgency and loss of micturation sense. Radiologic urodynamic studies revealed neurogenic bladder in 5 patients, hydronephrosis and hydroureter in 3, vesicoureteral reflux in 3. 3) Of 6 patients with urological abnormal manifestations 4 underwent spinal cord surgery (detethering). In spite of surgical intervention, the urological manifestations improved in only one patient. Conclusion : Urological abnormalities were common in tethered cord syndrome. Abnormal laboratory findings including urodynamic study were found even before the onset of urological symptoms. We have to concern tethered cord syndrome as one of common causes of voiding frequency and enuresis and to evaluate urological abnormalities as thetered cord syndrome is diagnosed.

• Research in Plant Disease
• /
• v.12 no.1
• /
• pp.15-19
• /
• 2006

This study was carried out to know pathogenicity of the pathogen isolated in several location of Korea and penetration mechanism of the Pseudocercospora vitis ($(L\acute{e}v)$.) Speg. Inoculation tests at room temperature were performed on both sides of leaves with different isolates of the fungus. The typical symptoms appeared on the abaxial leaf surface, but no symptom was observed on the adaxial leaf surface with all isolates. The average incubation period was nine days, since all symptoms appeared from 8 to 10 days after inoculation. In order to know the mechanism of invasion of P. vitis to grapevine, the behavior of penetration hyphae through stomata were compared in two cultivars having different level of resistance. In order to know the mechanism of resistance of grape vine to P.vitis, two cultivars having different level of resistance were compared by counting the numbers and measuring size of the stomata per leaf. In a susceptible cultivar Campbell Early, the number of stomata was more than that of a resistance cultivar 'Kyoho'. In a susceptible cultivar 'Campbell Early', the fungus entered readily into stomata after inoculation. However, in a resistant cultivar 'Kyoho', the fungus seemed to pass over or surrounded only the guard cells. In comparison of height of guard cells of stomata between the two cultivars, significant differences were observed by scanning electron microscopy and light microscopy. The height of guard cells of 'Campbell Early' showed a little higher than those of 'Kyoho' known to be resistant to the fungus.

• Horticultural Science & Technology
• /
• v.32 no.3
• /
• pp.400-407
• /
• 2014

Urban farming supplies emotional stability and fresh vegetables to participating persons, however, no information regarding the biosafety of agricultural products from urban farming is available. Here, we collected 260 samples of Chinese cabbages and lettuce from 4 urban community gardens and 6 roof gardens in Seoul from September through October 2012, and monitored the microbiological and parasitological contamination quantitatively and/or qualitatively. The mean counts of total aerobic bacteria and coliforms were $6.1{\pm}0.8\;log\;CFU{\cdot}g^{-1}$ ( range, $5.4{\pm}0.6{\sim}7.1{\pm}0.8\;log\;CFU{\cdot}g^{-1}$) and $4.0{\pm}0.7\;log\;CFU{\cdot}g^{-1}$ (range, $2.3{\pm}0.6{\sim}6.1{\pm}0.9\;log\;CFU{\cdot}g^{-1}$), respectively. Coliforms were detected on 59.6% among 260 vegetable samples. There were no significant differences in the contamination levels of total aerobic bacteria and coliforms between the Chinese cabbages and lettuce, whereas both levels of vegetables from urban community gardens were higher than those of roof gardens (p > 0.05). Escherichia coli was isolated at 3.1% among whole vegetables, and contamination level was $1.5{\pm}0.2\;log\;CFU{\cdot}g^{-1}$. Among foodborne pathogens, Staphylococcus aureus was detected in 1.5%, however, Salmonella spp., Listeria monocytogenes and E. coli O157:H7 were not detected on any of the vegetable samples. We also found undefined parasite eggs from two samples of Chinese cabbages (0.8% of total vegetables we tested). From these study, we found the presence of microbial contamination of agricultural products from urban farming, thus we need further concern to improve the biosafety during production of agricultural products.

• Journal of Bio-Environment Control
• /
• v.9 no.3
• /
• pp.166-170
• /
• 2000

Three methods for heat collection, which were the flat solar collector, two fan with radiator, and square pipe method, were studied to sue efficiently solar energy in the three different glasshouses for two years. The flat plate solar collector method was made use of the commercial solar collector with collection area of 24$m^2$, the method of two fans with radiators collected solar energy at the top of the glasshouse. An thermal storage tank was constructed underneath in teach glasshouses. When an area of 1,000$m^2$ was heated to the minimum temperature of 9$^{\circ}C$, the decrease rate of heating fuel for the flat plate solar collector, the fan attached radiator and the square pipe methods were 7%, 19% and 28% respectively. The flat plate solar collector method, which could be heated approximately 40-50$m^2$, was currently used by most of the farmer. Under the condition, the decrease rate of annual heating fuel was 14% which was not better for an economic annual heating fuel. If the fan with radiator method was operated, the use of installation and maintenance were required. So, it could not be good economic efficiency of solar heating. The heating efficiency of the square pipe method was relatively better thant those of the flat plate solar collector or the fan attached radiator. Since the cost of materials and its installation of the use of square pipe method was lower than any other method. However, corrosion of the pipe, greater shade in the greenhouse and strength against the square pipe were problems that should be overcome in the square pipe method.