• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.22 no.1
• /
• pp.81-88
• /
• 2009

This paper alined at the development of a lateral drift control method that is able to quantitatively control the lateral drift of global node. For this, we applied an efficient partial reanalysis algorithm. By using this algorithm, we could recalculate the displacement and member force of the specific node without reanalyzing the entire structure when member stiffness changes partially. The theoretical concepts of the algorithm are so simple that it is not necessary to solve the complicate differential equation or to repeat the analysis of entire structure. The proposed method calculates the drift contribution of each member for the global displacement according to the variation of section sizes by using the algorithm. Then by changing the member sizes as the order of drift contribution, we could control the lateral drift of global node with a minimum quantity of materials. 20 story braced frame structure system is presented to illustrate the usefulness of proposed method. It is shown that the proposed method is very effective in lateral drift control and the results obtained by proposed method are consistent with those of commercial analysis program.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.17 no.4
• /
• pp.459-467
• /
• 2004

This paper presents an efficient reanalysis algorithm, named PRAS (Partial Reanalysis algorithm using Adaptable Substructuring), for the partially changed structures. The algorithm recalculates directly any displacement or member force under consideration in real time without a full reanalysis in spite of local changes in member stiffness or connectivity_ The key procedures consists of 1) partitioning the whole structure into the changed part and the unchanged part, 2) condensing the internal degrees of freedom and forming the unchanged part substructure, 3) assembling and solving the new stiffness matrix from the unchanged part substructure and the changed members.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.1
• /
• pp.525-532
• /
• 2014

In this study, practical design method of coupling beams is proposed. The member forces varies according to the location of the members and the members at 25%~40% of building height shows large member forces. The 100mm increase of wall thickness causes 3~4% variation of member forces and the 100MPa increase of concrete strength decrease approximately 3% of member forces. The required strength of coupling beams is twice the resistant strength and 80% reduction of coupling beam stiffness is necessary to fulfill the design criteria. The stiffness reduction of coupling beams is not necessary over the entire stories and the strength reduction range can be estimated considering design requirements.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2009.04a
• /
• pp.279-282
• /
• 2009

본 논문에서는 행렬응축기법 및 부구조기법을 이용하여 가변형 입체 복합 공간 구조물을 효율적으로 해석할 수 있는 해석기법을 제안하였다. 최근 구조공학의 발전과 더불어 다양한 사회적 경제적 요구에 의해 가변형 입체 복합 공간 구조물에 대한 연구가 진행되고 있다. 가변형 입체 복합 공간 구조물은 많은 구조부재가 필요 하며, 부재 수가 많아짐에 따라 각 절점이 가지는 자유도수가 크게 증가하여 초기 해석 과정에서 많은 시간이 요구된다. 또한 구조물이 변경되는 경우에는 변경되는 부분의 강성의 변화에 따라 전체 구조물의 강성이 변경되므로 이에 따른 전체 구조물의 재해석 과정이 필요하다. 이러한 점에서 구조물의 자유도수를 줄여주는 행렬응축기법과 반복적인 해석과정을 줄여주는 부구조기법은 가변형 입체 복합 공간구조물을 효율적으로 해석 할 수 있는 방법이 될 수 있다. 본 논문에서는 행렬응축기법과 부구조기법을 이용하여 가변형 입체 복합 공간 구조물을 효율적으로 해석할 수 있는 해석기법을 제안하고, 이를 토대로 구체적인 알고리즘을 작성하였다. 또한 알고리즘을 구체화시켜 가변형 입체 복합 공간 구조시스템에 적합한 구조해석 프로그램을 개발하여 예제 구조물에 대하여 구조해석을 수행하였으며, 구조해석 결과를 상용프로 그램의 구조해석 결과와 비교하여 해석기법에 대한 정확성 및 효율성을 검토하였다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.20 no.6
• /
• pp.731-742
• /
• 2007

This paper presents a new nonlinear analysis algorithm, that is, adaptive Newton-Raphson iteration method, The presented algorithm is based on the existing Newton-Raphson method, and the concept of it can be summarized as calculating the equivalent load for stiffness(ELS) and adapting this to the initial global stiffness matrix which has already been calculated and saved in initial analysis and finally calculating the correction displacements for the nonlinear analysis, The key characteristics of the proposed algorithm is that it calculates the inverse matrix of the global stiffness matrix only once irresponsive of the number of load steps. The efficiency of the proposed algorithm depends on the ratio of the active Dofs - the Dofs which are directly connected to the members of which the element stiffness are changed - to the total Dofs, and based on this ratio by using the proposed algorithm as a complementary method to the existing algorithm the efficiency of the nonlinear analysis can be improved dramatically.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.17 no.2
• /
• pp.171-181
• /
• 2004

This paper developed the theoretical method to predict structural performances and weight reduction rates of a carbody when its materials should be substituted. For the material substitution design of the carbody, the bending, axial and twisting deformations are evaluated under the constant stiffness and strength conditions. For the design of the primary structures such as the center beams, the cross beams and the cantrails, the bending and axial deformations are investigated under the condition of the constant bending stiffness, the constant bending or buckling strength by considering both the material properties and the cross sectional shapes. The developed indices to measure the weight reduction by the material substitution give good informations on the weak and strong points of a carbody design.

• Journal of Korean Society of Steel Construction
• /
• v.21 no.6
• /
• pp.619-626
• /
• 2009

The use of thin-walled flexural members has proven to be a practical way to achieve the lowest cost in the construction of prefabricated long-span, low-rise building frames in steel. On the other hand, most of these structures are subjected to corrosion due to environmental exposure, which can reduce their carrying capacity. Corrosion damage is a serious problem for these structures as it causes thickness loss. That is, the class of a section (plastic, compact, non-compact, or slender) may change from one to another due to the loss of thickness of the compression flange and web due to corrosion. In this study, the effects of corrosion on thin-walled members in long-span steel frames were evaluated with regard to the moment-rotation curve, initial stiffness, maximum load capacity, stiffness in the post-maximum capacity, and energy absorption.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.24 no.3
• /
• pp.283-288
• /
• 2011

For the earthquake resistance design designer should provide that structural yielding process is principally designed with the ductile failure mechanism. In order to get the ductile failure mechanism for typical bridges, pier columns yielding should occur before that of connections. However domestic bridge design with unnecessary stiff substructure leads to unnecessary seismic loads and makes it difficult to get the ductile failure mechanism. Such a problem arises from the situation that earthquake resistant design is not carried out in the preliminary design step. In this study a typical bridge is selected as an analysis bridge and design strengths for connections and pier columns are determined in the preliminary design step by carrying out earthquake resistant design. It is shown through this procedure that it is possible to get the ductile failure mechanism with structural members determined by other design.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.6
• /
• pp.13-20
• /
• 2017

High-rise building shapes are changing from orthogonal to irregular form and the current trend is to arrange members in geometric grid-patterns at the perimeter of buildings. This study proposes a simple model for the preliminary design of a hexagrid high-rise building. The size of the cross section is set to be different at each module and hexagrid unit, which is different from the previous studies in which all hexagrid members were the same. To examine the effect of hexagrid size on structural performance, 60-story hexagrid buildings with 1-, 2- and 4-story high modules are designed and analyzed. Maximum lateral displacement, steel tonnage, load carrying percentage of perimeter frame and combined strength ratio are compared for 15 buildings. As the lateral load carrying capacity of hexagrid structure was inferior to a diagrid structural system, proper lateral stiffness should be allocated to the core frame in a hexagrid structure. The best ratio of flexural to shear deformation was 4 and larger unit size was better in considering constructional cost and structural efficiency. As the maximum lateral displacements of the buildings were within 84%~108% of the limit, the proposed method seems to be applicable to preliminary design of hexagrid buildings.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1996.04a
• /
• pp.11-21
• /
• 1996

선박은 화물 및 여객을 수송하는 해상교통 수단으로써 여객 및 승무원의 안락성, 탑재장비, 기기의 성능 보전 상, 화물 및 구조부재의 안전성 차원에서 진동제어가 주요 해결 기술의 하나이다. 또한 최근 선박의 대형화, 고속화로 인해 엔진과 프로펠러의 기진력은 커지는데 반해 구조 강도계산 기술의 발달로 인해 선체구조 경량화가 촉진되어 선체의 유연성이 커질 뿐 아니라 전통적인 선체 구조와 기관, 축계 강성사이의 균형이 깨어짐으로 선박의 진동제어는 더욱 중요시 되고 있다. 선박의 경우 건조 후에 진동제어를 위한 조치를 취하는 일은 매우 제한적이고 많은 비용이 들기 때문에 설계단게에서 선박진동제어를 위한 사전 노력이 충분히 이루어지는 것이 중요하다. 따라서 선박의 주 기진원인 프로펠러, 주기관 등의 기진력 자체를 적정화하는 노력과 함께 그로 인한 응답을 극소화하기 위해 설계 단계부터 인도까지 단게별로 많은 노력을 기울이고 있다. 단계별 진동제어의 한 예를 Fig.1에서 보여주고 있다[1]. 선체와 같이 복잡한 대형구조물의 진동특성 및 응답을 계산함에 있어서 컴퓨터의 발달과 유한요소법과 같은 해석기술의 발달로 실제 구조와 매우 유사한 3차원 모델링이 가능하게 되어 해석의 정도를 높일 수 있게 되었다. 그러나 프로펠러 기진력, 유체와의 연성효과, 감쇠특성 등을 정도 높게 산정하는 데는 아직도 많은 어려움이 있다. 이와같은 문제는 진동응답의 계산정도를 저하시키는 주요 요인이 되어 설게단계에서 충분히 진동 제어가 이루어졌다 하더라도 건조 후 실제운항 시 진동문제가 발생되는 경우가 있다. 건조 후 진동문제 발생시 구조변경을 통한 해결은 한계가 있기 때문에 각종 진동제어 장치의 연구개발이 최근에 활발히 이루어지고 있다[2]. 본 고에서는 설계단계에서부터 건조 후까지의 선박진동제어 과정[1,2,5,6]을 단계별로 고찰하여, 점점 까다로워져 가는 선박 진동규제[3,4]에 대처하고 승무원의 안락성에 대한 욕구, 구조물의 안전성, 장비의 성능보존이 만족되는 저진동 선박의 건조를 위해 향후 해결해야할 과제들을 도출하여 선박진동분야이 연구개발 방향을 제시하고자 한다.