• Proceedings of the KSEEG Conference
• /
• 2007.04a
• /
• pp.208-211
• /
• 2007

• Journal of Korea Water Resources Association
• /
• v.50 no.11
• /
• pp.715-723
• /
• 2017

Extracellular Polymeric Substances (EPS) in the water environment assemble fine, colloidal particles, such as clays, microorganisms and biomass, in large flocs, which are eventually subject to sedimentation and deposition and determine water/sediment quality and quantity. This study hence aimed to investigate the way that water and colloidal chemistry affects EPS-mediated flocculation of colloidal particles, using a jar-test experiment. Especially, ionic strength, divalent cation and humic substances concentrations were selected as experimental variables in the jar-test experiments, to elucidate their effects on EPS-mediated flocculation. A higher ionic strength increased flocculation capability, reducing electrostatic repulsion between EPS-attached colloidal particles and enhancing particle aggregation. 0.1 M NaCl ionic strength had higher flocculation capability, with 3 times larger floc size and 2.5 times lower suspended solid concentration, than 0.001 M NaCl. Divalent cations, such as $Ca^{2+}$, built divalent cationic bridges between colloidal particles and EPS (i.e., $colloid-Ca^{2+}-EPS$ or $EPS-Ca^{2+}-EPS$) and hence made colloidal particles to build into large, settelable flocs. A small $Ca^{2+}$ concentration enhanced flocculation capability, reducing suspended solid concentration 20 times lower than the initial dosed concentration. However, humic substances, adsorbed on colloidal particles, reduced flocculation, because they blocked EPS adsorption on colloidal particles and increased negative charges and electrostatic repulsion of colloidal particles. Suspended solid concentration in the tests with humic substances remained as high as the initial dosed concentration, indicating stabilization rather than flocculation. Findings about EPS-mediated flocculation in this research will be used for better understanding the fate and transport of colloidal particles in the water environment and for developing the best management practices for water/sediment quality.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.202-202
• /
• 2022

SWAT모형은 장기간에 모의가 가능하며 다양한 토양이용과 토지특성을 고려할 수 있는 유역 단위 모형으로 많은 연구에서 이용된다. 이러한 유역단위 수문모형의 평가는 통계적 지수(NSE, R2)들로 모형의 적합성을 평가한다. NSE, R2는 상대적으로 큰 값에 대한 영향을 많이 받는다. 따라서 많은 강우량이 발생하는 시점에서의 유출량과 SS농도가 중요시되었다. 하지만 강우시에 하천으로 유입된 토양 중 일부는 하천에 퇴적물로 침전된다. 이 침전된 토양이 비강우시 바람 등과 같은 이유로 재부유되며 이로 인해 수중 DO를 고갈시켜 수생태계 악영향을 미친다. 이에 따라 비점오염저감시설 평가는 강우시 발생하는 SS농도도 중요하지만 비강우시 재부유되는 SS농도도 중요한 부분이다. SWAT모형에서는 하천 SS농도를 계산하는데 사용되는 매개변수가 강우시와 비강우시에 동일하게 적용되어 비강우시에 과대 산정되어 비강우시 SS농도가 증가되도록 sediment routing이 진행되고 있었다. 본 연구에서는 sediment routing을 수정하여 비강우시 SS농도를 실측 농도와 비슷하게 보정할 수 있도록 개선하였다. 비점오염관리지역 중 하나인 자운천 유역에 개선된 sediment routing을 적용하였다. 개선된 모형은 비강우시 농도가 잘 반영하는 것으로 확인되었다.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.6 no.2
• /
• pp.46-53
• /
• 2003

In order to analyze the movement characteristics of suspended solid(SS) in harbor construction, we investigate the generation and movement processes of the SS for the landfill construction by direct casting method and the grab dredging construction which is the most frequent process in harbor construction. We find that the SS is generated into a very high concentration right after the direct casting of landfill soil and continued up to 60 minutes in the landfill construction using the direct casting method with dredged materials by a ship of 700-tonnage. In the grab dredging construction, the SS is generated in a high density of concentration near at its source regardless of water depth, formed belt and diffused up to 700m along the trajectory of tidal current. Based on the result of the present study, it is recommended for the mitigation of SS generation that the silt protector be deployed near at construction site close enough to block the diffusion of SS and the body length of silt protector be long enough to mitigate the SS diffusion in the bottom layer.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.32 no.5
• /
• pp.649-653
• /
• 1999

A magnetic fluid separation technology was confirmed to be very effective to remove the suspended solids (SS) from aquacultural recirculating water, In this study, the effects of operating variables on the characteristics of SS removal were investigated through the test runs using magnetite of 2 $\mu$m mean diameter as magnetic powder. Magnetic flocculation here formed by adsorbing fine magnetites on the surface of suspended solid was observed. The strength of magnet was of significance in determining the SS removal efficiency as well as the capacity of the equipment. In addition, the SS removal efficiency decreased with an increase in the superficial liquid velocity, but the effect became negligible when the mass ratio of magnetite to the suspended solids was higher than 1.0.

• 한국해양학회지
• /
• v.30 no.5
• /
• pp.371-381
• /
• 1995

To investigate the concentrations and transport patterns of particulate metals in river suspended matters, eighteen samples were collected from a fixed station located in the upper part of the Keum River through one year, and analysed for major elements (AI, Fe, P, Mn) and trace elements (Cr, Co, Ni, Cu, Zn, Cd, Pb, U). The contents of metals in suspended particulate matters (SPM) varied greatly with season and SPM load; maximum value in winter with low SPM level and minimum value in flood period and in spring Yangtze SPMs. The different trace metal level between rivers of Korea and China may be caused by the different geology of drainage basin(U) and by the different extent of anthropogenic input (Mn, Pb). Most of all particulate metals (>70%) except Mn, P and Cd were transported in the flood period with high water discharge and high suspended load. The magnitude of each transport phase (dissolved, non-detrital and detrital metals) was compared. The portions of labile metals (dissolved plus non-detrital metals) in the aquatic environment were in the range of 50%(Co) to 92%(Mn) of total metal transport and in the rank of Mn>Cd, U>Cu>Zn>Ni>Pb>Co.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.4 no.4
• /
• pp.13-23
• /
• 1984

The purpose of this paper is to develop a numerical model which can be used to compute the suspended load concentration of which the two-dimensional unsteady diffusion equation is able to be solved by the finite difference method using the implicit scheme. The pick-up rate formula from the bottom used in the open channel as a sink source term and the Coleman's empirical formula for the diffusion coefficient were taken, and especially the hindered settling velocity and the vertical velocity of flow due to the periodical tidal motion were taken into account, while the effects of the variables, such as the horizontal and vertical velocities of flow, tidal range, the settling velocity and hindered settling, on the suspened load concentrations have been discussed, comparing the results obtained from the different cases in the simulation conditions.

• Membrane Journal
• /
• v.19 no.4
• /
• pp.268-276
• /
• 2009

In this study the basic data were settled down to establish theory of membrane module and apparatus for measuring suspended solid per particle size. The theory and technique were different with the conventional weight method and light scattering method. For this purpose silica, dextran, kaolin, and PEG (polyethylene glycol) suspended solutions were filtrated through glass fiber membranes GF/C and GF/A on membrane module for measuring TMP (Trans-membrane pressure) changes using digital pressure gages. And the related equation between modified solution concentration and TMP change slope was derived from the TMP change experiments, and then suspended solid concentration of samples could be expected by the equation.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.16 no.1
• /
• pp.47-55
• /
• 2004

A SS prediction system using GUI in coastal region has been developed to predict the dispersion of the suspended sediments occurred by dredging. The prediction system uses a finite element hydrodynamic model to calculate water level and velocities and a random-walk particle tracking model to simulate SS dispersion. The system was applied to hindcast the tidal currents and SS concentrations in the Kunsan coastal waters. The simulated tidal currents showed good agreements with the observed currents. The transport model was verified for analytic solutions and field observation showing good agreements.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.207-211
• /
• 2011

하천공사의 매립 및 준설 시 뿐만 아니라 최근에는 호우 시에도 발생하는 고농도 오탁수의 유출 확산으로 인하여 주변 수역의 수산자원 및 자연환경에 심각한 영향을 미치고 있다. 특히 유사는 하천과 호소에 유입되어 탁도를 증가시켜 수자원의 이용가치를 저하시키며, 박테리아나 각종 미생물의 이동 매개체가 되고 있다. 또한 퇴적된 유사는 유량이 증가하면 다시 침식되어 부유상태가 되며 이때에 영양염류나 독성물질이 재용출 되기도 하는 등 하천의 물리 및 토양환경의 장 단기적인 변화를 유발하는 원인이 된다. 결국 유사는 다양한 방식으로 하천과 호소의 생태환경에 큰 변화를 초래한다. 부유토사의 발생 가능한 피해의 범위와 정도는 유역의 부유토사 발생율과 하천, 호소 퇴적물의 성분종류와 입도분포, 그리고 유속에 따라 결정된다. 따라서 탁수의 영향범위를 예측하고, 악영향이 예측될 경우에는 탁도를 저하시킬 수 있는 오탁물질의 저하기법을 적용하여 그 대책을 수립하여야 한다. 현재 정부가 역점을 두고 있는 4대강 살리기 사업 중 하나인 하천 준설 사업 시 발생되는 고농도 오탁수는 주변 수역의 수자원 및 자연환경에 심각한 영향을 미치므로 자연환경의 보존, 해양자원을 보호하기 위하여 오탁물질의 제어가 반드시 필요한 실정이다. 기존의 오탁 저감시설이나 방법의 경우 오탁물질의 확산을 제어하는데 한계가 있고 오탁물질의 종류와 관계없이 일률적으로 시공함으로서 오탁제어 효과가 의문 시 되고 있다. 이러한 문제점을 개선하기 위하여 오탁물질의 확산 범위를 줄이고 침강효율을 높이는 방법을 찾아 오탁확산 제어 효율을 개선할 필요가 있다. 본 연구에서는 오탁물질 제어 시 2차 응집물로 인한 오염이 발생하는 않는 천연광물 제올라이트를 이용한 실내실험을 통하여 고농도 탁수의 탁도 저감효율을 파악하여 고농도 탁수의 탁도 저감에 대한 제올라이트의 적용 가능성을 살펴보았다. 4대강 살리기 사업 중인 OO강 OO공구의 OO보 현장에서 하천 준설 시 발생하는 고농도 탁수를 이온을 첨가한 제올라이트를 이용하여 확산제어에 관한 효과를 검토한 결과 2,000NTU 정도의 고농도로 유하하는 탁수에 대하여 제올라이트 혼합 후 20분이 경과한 시점에 제거효율이 90%이상으로 제올라이트의 탁수저감 효과가 대단히 크다는 것을 알 수 있었다.