• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.5
• /
• pp.375-382
• /
• 2018

To eliminate strong jamming signals, a radar acquires a relatively weak target signal by using a side-lobe canceller (SLC) algorithm. This paper presents a novel adaptive SLC algorithm that is applicable to a fully digital active array radar. First, a covariance matrix is obtained from the SLC beam. Then, an adaptive SLC coefficient is extracted after calculating the correlation matrix between the main beam signal and the SLC beam signal. Finally, the target signal is estimated and the jamming signal is removed through the operation with the main beam signal. The application results from simulated radar signals demonstrated that the proposed algorithm is effective in an SLC system. Moreover, we analyzed various considerations and improved systematic usability.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.9
• /
• pp.155-162
• /
• 2011

It is using to incident angle estimation technique in order to target estimation in radar. This paper was estimated incident angle estimation for target using adaptive array incident angle and single look error incident angle estimation technique. We estimated signal incident angle of target to removal main lobe and side lobe to adaptive array incident angle technique. It is difficult to correctly target estimation because single look technique increase direction error of signal incident angle. In order to receive a desired target signal must be not almost look error between signal incident angle and look angle. we had decreased to occur a look error using delay time and single look condition to calculation a covariance when incident angle estimate. Through simulation, we show that the proposed incident angle estimation technique improves the performance of target estimation compared to previous method.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.2
• /
• pp.187-195
• /
• 2012

In this paper, we propose the optimization of subarray configurations for linear array to minimize the side lobe level (SLL) in sum beam pattern based on the genetic algorithm. The operations of genetic algorithm are modified to be applied to subarray configurations. Using the proposed method, we construct subarray structure with 16 irregular subarray elements from 40 linear array elements to minimize the SLL in sum beam pattern in case of applying the adaptive beamforming(ABF) to suppress the jamming power, whose the SLL is 10 dB lower than that of regular subarray configuration.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.11
• /
• pp.1410-1413
• /
• 2016

Array beamforming for anti-jamming means that jamming signals are superposed destructively, while superposing information signals constructively at a receiver. However, according to channel state variation, the anti-jamming performance of the beamforming can be degraded because of large beamwidth of the sidelobe and lower selectivity of the mainlobe. To mitigate this problem, we introduce a beamformed decoy signal which uses frequency band distinguished from the information signal to make the jammer concentrate its jamming power to a wrong target under limited feedback. In this paper, we show that the performance of the proposed scheme can approach that of optimal one with perfect feedback.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.5
• /
• pp.101-107
• /
• 2011

The optimum weight vector is studied to remove interference and jamming signals in adaptive array antenna system. The optimum weight vector is calculated to apply a minimum variance algorithm and cost function in linearly constrained conditions, and accurately estimates target's signal. Adaptive array antenna system is the system which improves signal to noise ratio(SNR) and decreases interference and jammer power. Adaptive array antenna system delays at tap output of antenna array element. Each tap finally makes the complex signal of one in multiplier complex weight. In order to obtain optimum's weight calculation, optimum weight vector is used in this paper. After simulation, resolution is increased below $3^{\circ}$, and sidelobe is decreased about 10 dB.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.11C
• /
• pp.948-956
• /
• 2010

Griffiths and Jim has proposed a beamforming structure called GSC algorithm, in which antenna elements are grouped into main-channel and sub-channel, and sidelobe is reduced by applying adaptive LMS algorithm. This paper proposes WLMS-GSC algorithm where the Haar and Daubechies wavelet filters are used to process array antenna output, instead of using subtractor filter. We analyze characteristics of the proposed WLMS-GSC algorithm. The WLMS-GSC has characteristic of reducing the computational requirement one-half compared to the LMS-GSC algorithm. In addition, we obtain MSE characteristics and adaptive beampattern of WLMS-GSC algorithm, and compared with the performance of LMS-GSC algorithm. The simulation results show that the WLMS-GSC algorithm proposed in this paper gives better or almost the same performance, compared to the LMS-GSC algorithm. In addition, the newly proposed structure has advantage of low computational requirements.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.5
• /
• pp.568-573
• /
• 2019

Modern Radars are evolving into MFRs which can search multiple targets simultaneously and then track them. Additionally they should be able to avoid some external jamming signals. Applying to these MFRs, Antennas should be able to perform DBF including to not only real-time beam steering but also multi-beam forming simultaneously. And they can cancel the beam at the specific direction. In this paper, we describe the implementation of sub-array type antenna hardware which can be applying DBF. Also we propose the modified amplitude aperture distribution for suppressing the side lobe level and explain the sub-array receiver design with amplitude tapering. It consists in making the amplitude weighting in 2 steps. In order to compare two weighting cases, we investigate the G/T performance for the array antenna. At the conclusion, we make a comparative study for the dynamic range of every sub-array receiver and present the hardware implementation that is more advantageous for sub-array alignment and calibration in DBF.