• Title/Summary/Keyword: 부상량

Search Result 250, Processing Time 0.023 seconds

A Study on Solid-liquid Separation of Swine Wastewater Using Coagulation and Dissolved Air Flotation (응집침전 및 부상분리에 의한 돈사폐수의 고액분리에 관한 연구)

  • Kim, Jong-Oh;Jeong, Seong-Uk
    • Journal of the Korea Organic Resources Recycling Association
    • /
    • v.12 no.2
    • /
    • pp.101-109
    • /
    • 2004
  • In this study, the solid-liquid separation characteristics of swine wastewater were investigated for the coagulation and dissolved air flotation (DAF). Coagulation characteristics were studied using jar-tester with the different coagulants and dosage amounts. DAF characteristics were also investigated in terms of the different flotation conditions with the raw swine wastewater, pH adjustment only, and adding coagulants. When the raw swine wastewater was coagulated with the only inorganic coagulants, the proper inorganic coagulants were founded as $FeCl_3$ > PAC > Alum orderly, and the optimal coagulant dosages were founded as $1,000mg/{\ell}$, $1,500mg/{\ell}$, $1,500mg/{\ell}$, respectively. As the raw swine wastewater was treated with the polymer coagulants, the only cationic polymer coagulant showed an effective coagulation and the optimal dosage of cationic coagulant was founded as $200mg/{\ell}$. When the different dosages of cationic polymer was added to each $500mg/{\ell}$ of the inorganic coagulants, the proper inorganic coagulants were founded as $FeCl_3$ > Alum > PAC orderly, and optimal cationic polymer dosages was founded as $25mg/{\ell}$, $25mg/{\ell}$, and $100mg/{\ell}$, respectively. Resulting from the raw swine wastewater experiments using DAF without coagulation, the proper operation conditions of DAF were set to 400% of recycling ratio, 4 atm in air dissolving tank, and under pH 3. But the raw swine wastewater was difficult to successfully operate DAF without pre-coagulation. While the DAF separation after pre-coagulation using inorganic coagulants was not accomplished due to the low intensity of the floc, DAF after pre-coagulation using both the inorganic and cationic polymer coagulants was accomplished very well. Optimal dosage of cationic polymer coagulant in case of $500mg/{\ell}$ Alum dosage was founded as $500mg/{\ell}$.

  • PDF

A Theoretical Approach on the Pressure Drop in Two-phase Particle-laden Flows (고체입자가 부상된 이상유동에서 압력강하에 대한 해석적 접근)

  • Kim Seyun;Lee Kye-Bock
    • Journal of Energy Engineering
    • /
    • v.14 no.1
    • /
    • pp.11-17
    • /
    • 2005
  • The purpose of this research is to develop the model of pressure drop per unit pipe length due to the turbulence modulations in particle-laden flows which can be applied to various fluid conditions. The wake behind a particle, particle size, loading ratio and density difference between two phases of particle-laden flow was considered. The frictional pressure drop was modeled with the force balance in control volume. The numerical results show good agreements with available experimental data and the model success-fully predicted the mechanism of the pressure drop in particle-laden flows.

The Market Outlook and Perspectives on VDSL Technology (국내 VDSL 시장 현황 및 전망)

  • Jee, K.Y.;Go, J.G.;Park, S.J.
    • Electronics and Telecommunications Trends
    • /
    • v.17 no.2 s.74
    • /
    • pp.29-39
    • /
    • 2002
  • VDSL 기술은 인터넷방송과 주문형비디오(VOD).원격교육.고화질 TV 등 대용량의 멀티미디어서비스를 수용할 수 있고, 컨텐츠사업자들의 수익모델에도 적합하기 때문에, ADSL에 이은 새로운 초고속 인터넷접속기술 대안으로 부상하고 있다. 본 고는 멀티미디어 가입자 수요증가에 따라 차세대 xDSL 기술로 부상하고 있는 VDSL의 기술적인 특성 및 국내 시장 동향을 살펴본다.

A Study on Development of Air-floating Conveyor System for FPD (FPD용 공기부상 이송시스템 개발에 관한 연구)

  • Lee, Wook-Jin;Kim, Hwa-Il;Lho, Tae-Jung
    • Proceedings of the KAIS Fall Conference
    • /
    • 2008.05a
    • /
    • pp.40-42
    • /
    • 2008
  • FPD용 마더글라스의 크기가 급격히 증가함에 따라 새로운 이송방식이 요구되어 유로망 해석을 통해 마더글라스의 무게에 맞는 양력을 발생시킬 수 있는 공기부상 이송시스템을 구성한다. 또한 마더글라스의 처짐량을 계산하여 최적화 된 FPD공기부상 이송시스템을 설계한다.

  • PDF

Effect of Chemical Conditioning on Flotation and Thickening Efficiencies of Sewage Sludge (화학적인 개량이 하수슬러지의 부상농축효율에 미치는 영향)

  • Lee, Chang-Han;Ahn, Kab-Hwan
    • Journal of Korean Society of Environmental Engineers
    • /
    • v.31 no.9
    • /
    • pp.743-748
    • /
    • 2009
  • Chemical sludge conditioning is widely used to improve the dewatering efficiency. It is treated with commonly used conditioners, and then thickened and dewatered with a mechanical device. This paper aims to examine the flotation and thickening efficiencies of sewage sludge for conditioning conditions, such as unaerobic storage time, kinds of coagulant and dosages, and flotation conditions, such as sludge concentration and A/S ratio, using an dissolved air flotation apparatus. Experimental results showed that the specific surface area and specific resistance to filtration (SRF) were significantly increased and the flotation and thickening efficiencies were decreased with anaerobic storage time. However, the flotation and thickening efficiencies faintly decreased in sewage sludges conditioned as $Al_2(SO_4)_3$, $Fe_2(SO_4)_3$, and PSO-M. Flotation and thickening efficiencies in conditioned sewage sludge could be sustained up to 96% at A/S ratio of 0.01 mL/mg or over.

중국 조선산업의 부상과 대응전략

  • 홍성인
    • Bulletin of the Society of Naval Architects of Korea
    • /
    • v.41 no.2
    • /
    • pp.68-85
    • /
    • 2004
  • 중국 조선산업의 성장 속도가 빨라지고 있다. 2003년 말 기준 세계 조선시장에서 중국이 차지한 비중은 수주량 기준 13%로 유럽 전체의 5.6%를 2배 이상 상회하고 있다. 수주량908만GT, 건조량286만GT로 수주량의 경우 1995년 이후 연평균 증가율이 우리나라의 19.0%를 크게 웃도는 30.1%로 나타나고 있다. 물론 세계시장에서의 점유율, 특히 최근까지의 선종별 건조량을 비교해 보면 아직까지는 우리나라의 절대적 우위가 드러나고 있다. (중략)

  • PDF

MCC의 부유부상 효율에 미치는 MCC의 표면에너지와 액상의 표면장력의 영향에 대한 기초연구

  • Lee, Hak-Rae;Lee, Jin-Hui;Park, Il;Lee, Yong-Min;Han, Sin-Ho;Jo, Jung-Yeon
    • Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
    • /
    • 2001.11a
    • /
    • pp.20-20
    • /
    • 2001
  • 우리나라 제지산업은 화학펼프의 80%를 수입에 의존하고 었으나 고지회수율 및 이용율이 세계적으로 볼 때 매우 높은 환경친화적 산업이다. 고지 재활용 공정 중에 서 가장 핵심적인 공정인 부유부상 공정은 고상계의 표면특성 차이를 이용하여 소수성 의 잉크업자를 기포에 부착시켜 부상을 통하여 제거하는 공정이다. 고지 사용의 고도화 를 위해서는 부유부상 공정의 효율 증대가 절실히 요구되고 있다. 또한 부유부상 공정 의 핵심적인 인자로 부유부상을 통하여 제거되는 고형물질의 표면 특성 특히 소수화도 가 중요하다는 것은 보고된 바 있으나 부유부상에 필요한 표면 특성의 존재 여부와 표 면 에너지와 부유부상 효율의 관계 등에 관한 기본적인 연구가 더욱 필요한 실정이다. 이에 본 연구에서는 부유부상 공정을 기초과학적 측면에서 규명하기 위해 마 이 크로 크리 스탈린 셀룰로오스(Microcrystalline cellulose: MCC)를 모델 물질로 사용하 고 이들의 표면특성을 접촉각 측정을 통하여 평가하였다. 친수성의 표면 특성을 지닌 M MCC의 표면 특성을 소수성으로 바꾸기 위하여 AKD(alkyl ketene dimer)의 함량별로 사이징 처리하여 소수성을 지닌 잉크를 모벨링 하고 친수성 MCC를 염색시약을 이용 하여 흑색으로 염색함으로써 소수화 된 MCC와의 색차를 두어 섬유를 모델링 하였다. 이렇게 제조된 MCC의 소수화 정도를 평가하기 위하여 분말상태인 MCC를 pellet으로 제조하여 각기 다른 표면장력과 표변특성을 지난 용액을 이용하여 Advancing Contact A Angle을 측정하고 다양한 방법으로 이를 분석하여 시료의 표면에너지를 평가하였다 그 리고 부유부상 셀내의 액상의 이온강도와 표면장력 등 화학적인 인자에 의한 부유부상 분리효과를 평가하였다.있었다 (그림 2). 칼렌다는 종이를 높은 전단력과 압축력으로 변형시키는데 비해 도침은 단순히 압축 압력만을 종이에 가하는 것이 다르다고 볼 수 있는데, 라 이너지와 백상지가 같은 조건하에서 왜 이러한 큰 차이를 보이는 이유를 아직 알수 없다.해 동일한 공정 데이터들올 이용하여 보편적으로 사용하는 통계기법 중의 하나인 주성분회귀분석을 실시하였다. 주성분 분석은 여러 개의 반응변수에 대하여 얻어진 다변량 자료의 다차원적인 변 수들을 축소, 요약하는 차원의 단순화와 더불어 서로 상관되어있는 반응변수들 상호간 의 복잡한 구조를 분석하는 기법이다. 본 발표에서는 공정 자료를 활용하여 인공신경망 과 주성분분석을 통해 공정 트러블의 발생에 영향 하는 인자들을 보다 현실적으로 추 정하고, 그 대책을 모색함으로써 이를 최소화할 수 있는 방안을 소개하고자 한다.금 빛 용사 둥과 같은 표면처리를 할 경우임의 소재 표면에 도금 및 용 사에 용이한 재료를 오버레이용접시킨 후 표면처리를 함으로써 보다 고품질의 표면층을 얻기위한 시도가 이루어지고 있다. 따라서 국내, 외의 오버레이 용접기술의 적용현황 및 대표적인 적용사례, 오버레이 용접기술 및 용접재료의 개발현황 둥을 중심으로 살펴봄으로서 아직 국내에서는 널리 알려지지 않은 본 기 술의 활용을 넓이고자 한다. within minimum time from beginning of the shutdown.및 12.36%, $101{\sim}200$일의 경우 12.78% 및 12.44%, 201일 이상의 경우 13.17% 및 11.30%로 201일 이상의 유기의 경우에만 대조구와 삭제 구간에 유의적인(p<0.05) 차이를 나타내었다.는 담수(淡水)에서 10%o의 해수(海水)로 이주된지 14일(日) 이후에 신장(腎臟)에서 수축된

  • PDF

A Study on the Establishment of Standard Amount of Pesticide in Applying the Sea Water Dipping Disinfection Method for the Imported Soft Woods. -Estimation of the Required Amount of Pesticide on the Area of Lumber over the Sea Level- (수입원목의 해수수침소독에 있어 농약소요량 산출에 관한 연구 -원목의 부상부위표면적을 기준한 농약소요량 판단-)

  • Hah J.K.;Kim B.H.;Shin I.K.;Kim J.H.
    • Korean journal of applied entomology
    • /
    • v.19 no.4 s.45
    • /
    • pp.212-220
    • /
    • 1980
  • The purpose of this study is to establish a standard amount of pesticide per unit area of the lumber over the sea level. This establishment is required in applying the sea water dipping disinfection method to the imported soft woods to control the pests living on the surface of the lumber. The major findings of this study are as follows; 1. The average length and diameter of the imported soft wood was respectively 11.12m and 76.46Cm. 2. The average cubic content of the lumber over the sea level to the whole cubic content was 20.82 percent. 3. The ratio of the lumber over the sea level to the whole cubic content was 2.3356 at the $95\%$ significance level. 4. The sampling error of the ratio of the area of the lumber over the sea level to the cubic content was lower in the case of the pieces of lumber in a vessel than the average between ten tressels. 5. The optimum amount of pesticide spray per $1\;M^2$ of the soft wood was 0.298 cc in the case of using the hand spray, but 0.245 cc the motor spray. 6. For example, in the case of applying the sea water dipping disinfection method to the 5,000 $M^3$ of the imported soft wood, the required amount of pesticide with a motor spray can be estimated as follow. $$5,000\;M^3\times2.333=11,678\;M^2$$ $$11,678M^2\times0.295=3,445cc$$.

  • PDF

에너지 저장용 초전도 벌크체의 제조 및 특성

  • Kim, Chan-Jung;Park, Sun-Dong;Jeon, Byeong-Hyeok
    • Proceedings of the Materials Research Society of Korea Conference
    • /
    • 2012.05a
    • /
    • pp.93.1-93.1
    • /
    • 2012
  • 세라믹 고온초전도체는 에너지 저장장치의 핵심소재로 사용된다. 초전도 플라이휠 에너지 저장장치(Superconductor flywheel energy storage system)는 전기 에너지를 운동 에너지로 변환하여 저장하는 친환경, 고효율 에너지 저장장치이다. 에너지를 최소화하는데 사용되는 초전도 베어링은 고온초전도체와 영구자석으로 구성된다. 베어링에는 희토류계 초전도 물질(RE-Ba-Cu-O, RE:Rare-earth elements)가 사용된다. 베어링의 효율은 영구자석의 자력크기, 초전도체의 자기부상력과 포획자력에 비례한다. 에너지 저장효율을 높이려면 고온 초전도체의 임계전류밀도(초전도체 내부에 흘릴 수 있는 전기량)를 높이고, 초전도 결정립의 크기를 키워야 한다. 결정크기를 키우는 공정으로 종자결정성장법(Seed growth process)이 사용된다. 초전도체 제조공정은 분말의 성형, incongruent melting을 포함하는 부분 용융, 액상에서의 입성장, 포정반응을 통한 초전도 결정의 성장과정을 포함한다. 본 발표에서는 초전도 에너지 저장장치의 기본 원리, 초전도 베어링의 구성, 베어링용 초전도체의 제조방법과 특성(자기부상력과 포획자력) 평가기술, 차세대 에너지 저장장치로서의 초전도 플라이휠 에너지 저장장치의 전망에 대해 요약하였다.

  • PDF

Study on Correlation between Large Earthquake-Induced Underground Structure Uplift and Geological Settings (대지진에 의한 지하구조물 부상과 지질학적 특성의 상관성 연구)

  • Kang, Gi-Chun;Kim, Ji-Seong
    • Journal of the Korean Geosynthetics Society
    • /
    • v.15 no.4
    • /
    • pp.9-16
    • /
    • 2016
  • During the 2004 Niigata-ken Chuetsu, Japan, earthquake, more than 1,450 underground structures, known as sewer manhole, were uplifted up to 1.5m in Nagaoka and Ojiya city. The uplift damage can be a serious matter because they not only hinder the flow of wastewater systems, as a part of lifeline systems, but also disturb traffic flows. For restoration works, an open-cut investigation of damaged wastewater system was conducted by the Nagaoka city government. The results from the investigation compiled valuable data sets for buried pipeline damage due to earthquakes. In the present study, the factors affecting the uplift amount of the underground structure is investigated by using the data sets which include locations of damaged sections and inclination of pipeline before and after the earthquake and the SPT borehole logs in the affected area. Correlation analysis between the underground structure uplift and the geological settings in the affected area revealed that ground water depth and original subsoil, including thickness of clay layer, SPT N-value and fill thickness are the key parameters for the uplift phenomenon.