• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.10
• /
• pp.1412-1419
• /
• 2006

Concentrations of formaldehyde and acetaldehy de were respectively analysed in forty-five alcoholic beverages obtained from the market. After derivatization with PFBHA, GC-ECD and GC-MSD were employed for analysis. The peak area of aldehyde oximes (derivatives with PFBHA) increased with the increasing ethanol content (5%, 10%, 15%, 20% and 40%). When three-point calibration corves for the selected ethanol concentration (5, 13, 21 and 40%, v/v) were studied, suitable linearity against ethanol concentration was observed only under 5, 13, and 21% (ethanol, v/v). After analysis, maximum content of formaldehyde (average of 0.272 ppm) and acetaldehyde (average of 15.262 ppm) among the observed 45 alcoholic beverages was found from whisk (2 species) while minimum content of formaldehyde (average of 0.009 ppm) and acetaldehyde (average of 0.805 ppm) was found from diluted soju (4 species).

• Korean Chemical Engineering Research
• /
• v.59 no.4
• /
• pp.503-507
• /
• 2021

Sodium borohydride, NaBH₄, has many advantages as hydrogen source for portable proton exchange membrane fuel cells (PEMFC). When PEMFC is used outdoors as a transport type, it is economical to hydrolyze NaBH₄ using fresh water instead of distilled water. Therefore, in this study, hydrogen was generated using fresh water instead of distilled water during the NaBH₄ hydrolysis process. The properties of NaBH₄ hydrolysis were studied using an activated carbon-supported Co-P-B/C catalyst. Fresh water did not generate tetrahydrate during the NaBH₄ hydrolysis process, and distilled water produced tetrahydrate by-products, which consumed a lot of water during the hydrolysis process, indicating that at the end of the reaction at a high concentration of 25% or more of NaBH₄, dry by-products and unreacted NaBH₄ remained. As a result, when fresh water was used, the hydrogen yield and hydrogen generation rate were higher than that of distilled water at a high concentration of 25% or more of NaBH₄, indicating that it is suitable for use in transport-type fuel cells such as unmanned aerial vehicles.

• Korean Journal of Soil Science and Fertilizer
• /
• v.38 no.2
• /
• pp.108-117
• /
• 2005

Pharmaceutical byproduct sludge and cosmetic industry wastewater sludge can be used as a raw material of compost. Effects of three types of pharmaceutical byproduct sludge and one type of cosmetic industry wastewater sludge on soil properties and red pepper growth were investigated in a field based concrete pot ($2{\times}2m$). These sludges and pig manure ($5Mg\;ha^{-1}$, dry basis) were incorporated into the upper of loam soil 30 days prior to transplanting red pepper. Changes in soil properties and contents of heavy metals and toxic organic compounds in soil and plant were measured. And also plant growth measurement and bioassay of soil phytotoxicity were included. Contents of heavy metals were increased in the soils treated with the sludges. Plant growth in the sludge treatments were mostly inferior to that of NPK treatment, especially in early stage. Content of N in plant was lower in all sludge treatments at early and middle growth stages, and it was especially caused by characteristics and concentration of nitrogen and organic matter of sludges. Total yield of red pepper was highest in the NPK treatment and followed by pharmaceutical sludge 3, pig manure, pharmaceutical sludge 1, and pharmaceutical sludge 2, and the yield of cosmetic sludge treatment was considerably lower than others. HEM and PAHs contents in soil of cosmetic sludge treatment were $4.80mg\;kg^{-1}$ and $2,263.2{\mu}g\;kg^{-1}$, respectively. Root elongation of lettuce exposed to the water extract of soil treated with cosmetic sludge was about 20% of that found in the test with soil extract of non fertilization treatment. At present, raw materials of compost were authorized according to the contents of organic matter, heavy metals and product processing. Toxic organic compounds analysis and bioassay would be helpful for authorization and assessment of suitability of raw materials of compost.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.248.1-248.1
• /
• 2010

수송용 바이오연료로써 바이오디젤의 보급 활성화에 따른 원료인 식물성 기름의 가격 상승 및 수급 불안정성 문제를 해결하고자 그동안 활용되지 않았던 폐유지를 바이오디젤 생산 원료로 사용하여 바이오디젤 생산 단가를 낮추고 원료의 수급 안정성도 확보하려는 시도가 이루어지고 있다. 폐유지의 경우 대부분 유리지방산 함량이 높아 염기 촉매를 적용하는 방법으로는 비누의 생성으로 전환이 힘들며 산 촉매를 적용하여 유리지방산을 에스테르화하는 공정을 필요로 한다. 에스테르화 반응에서는 반응 부산물로 물이 생성되며, 생성된 물은 바이오디젤 생산 반응을 저해하고 역반응을 유도하며 촉매의 활성을 감소시킨다. 본 연구에서는 고유리지방산 함량 오일의 에스테르화 반응에서 수분의 영향을 검토하였다. 산 촉매로 액상 촉매인 황산과 고체 산 촉매인 Amberlyst-15를 사용하였다. 초기 수분 함량이 0, 1, 2, 5, 10, 20%로 증가하였을 때, 지방산 메틸 에스테르 함량이 크게 감소하였으며, 1%의 수분 함량에서도 반응이 크게 저해받는 것으로 나타났다. 따라서 고유리지방산 함량 오일의 에스테르화 반응에서 수분에 의한 저해가 중요한 변수라는 것을 알 수 있다. Amberlyst-15는 황산보다 수분의 영향에 의해 지방산 메틸 에스테르 함량이 빠르게 감소하였다. 이는 다공성의 Amberlyst-15에서 생성된 물이 반응물질들이 active site에 접근하는 것을 방해하였기 때문인 것으로 생각된다. 황산을 사용하였을 경우에는 오일 대 메탄올 몰비를 1:3에서 1:6으로 증가시킴으로써 정반응 속도가 증가하여 수분에 대한 영향이 감소하는 현상이 나타났다. 에스테르화 반응 종료 12시간 후에 바이오디젤과 메탄올 내에 수분 함량을 분석한 결과 12%의 수분이 바이오디젤 층에 존재하며 88%의 수분은 메탄올 층에 존재하였다. 반응 중에 생성된 수분을 제거하기 위해, 에스테르화 반응 30분 후에 물을 포함하는 메탄올과 촉매 층을 새 메탄올과 촉매로 교환하는 2단계 반응을 수행함으로써 지방산 메틸 에스테르 함량을 향상시킬 수 있었다. 반응 초기에는 황산이 Amberlyst-15보다 높은 활성을 보였지만, 시간이 지날수록 두 촉매 사이의 에스테르화 성능 차이는 감소하였다. 따라서 2단계 에스테르화 반응이 수분의 저해작용을 줄이는 한 가지 대안으로 제안될 수 있다. 또한 에스테르화 반응에서 물의 저해 작용을 줄이기 위해 앞으로 투과증발막의 적용 또는 물에 저해작용을 받지 않는 구조의 촉매 사용을 검토할 필요가 있다.

• Archives of design research
• /
• v.20
• /
• pp.99-109
• /
• 1997

The Bauhaus movement can be said to be the by-product of forming work pursued through the method of constituents even under endless discord between the so-called modern ages and anti-modern ages rather than to say that it was progressed consistently on the assumption of a design. Accordingly, all instruments of Bauhaus education which contributed to form the source of the modern ages realized educational value related to the actual problem at the point of time when the student evercomes all internal and production can be managed most effectively under one system was originated inevitably. The most exential point of the work of Bauhaus workshop is the fact that all products show homogeneity as time passes, which is appeared as the result of the spirit of consciously developed community based on cooperation between various characters and personalities. Also, the homogeneity does not exist in formative detailed aspect appeared externally but in the basis of effort having produced things simply and faithfully, and on the other hand, in accordance with essential rule. Therefore, the original form of Bauhaus products can be said not to be fashionable but the crystal of work process at the workshop through much thought and contemplation in view of endowed form following art, technology and economy.

• Journal of fish pathology
• /
• v.13 no.1
• /
• pp.67-73
• /
• 2000

This study was carried out to elucidate the preliminary ecosystem of the heterotrophic bacterial flora in Kunsan Bay located in western costal area of Korea. Samples were collected at 5 sampling stations. Among 123 bacterial isolates, 9 genera of bacteria were appeared as follows; Vibrio spp.(44 isolates/35.7%), Pseudomonas spp.(42 isolates/34.1%), Aeromonas spp.(11 isolates/8.9%), Moraxella spp.(9 isolates/7.3%), Enterobacteria spp.(6 isolates/4.8%), Bordetella spp.(3 isolates/2.4%), Alkaligenesis spp.(3 isolates/2.4%), Flavobacterium spp.(2 isolates/1.6%), and Staphylococcus spp.(3 isolates/2.4%) respectively. Total viable heterotrophic bacteria was ranged from $5{\times}10^3$ to $1{\times}10^5$ CFU/ml and the most abundant viable counts of bacterial population were showed at the stations 2 and 3. This result indicates that the coastal area around Kunsan bay is getting to contaminate far more by municipal wastewaters and industrial byproducts. and so the outbreak of the bacterial diseases will be increased in fish farms.

• Korean Chemical Engineering Research
• /
• v.49 no.6
• /
• pp.681-687
• /
• 2011

Produced water from oil production processes is mostly composed of oily wastewater. So, it is important to extract and remove the oil components from the produced water environmentally and in utilizing water resources. Produced water treatment is classified as physical, biological and chemical method. The technology trend of oil treatment for produced water was analyzed based on patent application years, countries, main applicants, and each technologies.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.55 no.3
• /
• pp.319-327
• /
• 2022

An eight-week feeding trial was conducted to evaluate the effects of a diet consisting of different onion juice processing by-product (OJPB) levels on juvenile black rockfish Sebastes schlegelii growth, feed utilization, and, lysozyme and antioxidant enzymes activities. Juvenile rockfish (2.2 g) were randomly distributed into 15 flow-through tanks (30 fish/tank). Five experimental diets were prepared in triplicate. The experimental diets were supplemented with OJPB at different levels of 0 (control), 0.25, 0.5, 0.75 and 1% (designated as OJPB0, OJPB0.25, OJPB0.5, OJPB0.75 and OJPB1, respectively). At the end of the feeding trial, the results revealed that the fish that were fed the OJPB0.75 and OJPB1 diets showed enhancement in growth (weight gain and specific growth rate) and feed utilization (feed efficiency and protein efficiency ratio) compared with the fish that were fed other diets. Plasma lysozyme, glutathione concentration, and superoxide dismutase and catalase activities significantly increased in the fish that were fed the OJPB0.75 and OJPB1 diets. In conclusion, dietary supplementation of 0.75-1% OJPB in juvenile rockfish diet improved the growth performance and antioxidant status.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.106.2-106.2
• /
• 2010

동식물성 기름과 메탄올의 전이에스테르화 반응에 의해 생산되는 바이오디젤은 환경친화성과 지속가능성이 인정됨에 따라 그 생산량이 급격히 증가하고 있어 대두유, 유채유, 팜유 등의 원료유 부족과 가격 상승, 수급 불안정 등의 문제가 대두되고 있다. 이를 해결하기 위한 방안으로 유리지방산 함량이 높은 저가유지 자원(폐식용유, 폐돈지, 폐우지, soapstock, trapped grease)과 새로운 오일 작물을 이용한 생산 기술 연구가 활발히 진행되고 있다. 본 연구에서는 비활용 해외 열대작물 씨앗에서 착유한 식물성 오일을 정제하여 바이오디젤 원료유를 생산하는 과정에서 발생하는 폐기물(폐유, 폐수)의 경제적 처리 방안으로 유화유 제조 원료(벙커C유, 물)와 유화유 제조 첨가제(무기계, 유기계)로 활용 가능성을 검토하였다. 열대작물 오일의 물성 분석 결과 고형물, 수분, 인지질(phospholipid), 유리지방산(free fatty acid) 함량이 기존 원료유보다 매우 높게 나타났다. 인지질은 바이오디젤 제조 반응후 에스테르와 글리세린의 층분리를 방해하고 유리지방산은 염기촉매와 결합하여 지방산염을 생성해 생산 수율을 감소시킨다. 고형물과 수분 역시 촉매반응에 악영향을 가지나 여과와 감압증발에 의해 쉽게 제거가 가능하다. 유리지방산은 산촉매 에스테르화 반응에 의해 제거가 가능하다. 인지질은 탈검(degumming) 과정을 통해 제거하며 탈검은 수용성 탈검, 산 탈검, 세정 공정으로 구성된다. 착유한 원료유의 고형물을 제거 후 물과 수세하여 수용성 인지질을 수화하여 층 분리해 제거하고 상층의 오일은 추가적인 산 탈검을 수행한다. 그 뒤 세정을 통해 사용된 탈검제인 산과 추가적으로 수화된 인지질을 제거하게 된다. 이러한 3단계의 탈검 과정에서 하층으로 오일과 물이 폐기물로서 배출되며 본 연구에서는 배출 폐기물을 다시 층분리하여 오일층과 물 층으로 구분하여 유화유 제조에 사용되는 벙커C유, 물, 그리고 기존 유기계 및 무기계 유화제의 대체 가능성을 조사하였다. 유화 연료유는 기름과 물을 균일한 분산상으로 혼합한 연료유로 연소시 오일계 성분의 미연분을 감소시켜 연료 효율 제고와 배출가스 성상을 개선하기 위해 개발되어 왔다. 본 발표에서는 다양한 종류의 상용 첨가제 및 바이오디젤 원료유 생산 폐기물을 활용해 유화 연료유를 제조하였으며 각 유화유의 장시간의 상(phase) 안정성을 비교하였다. 바이오 폐기물 중에는 천연 계면활성제(surfactant)인 인지질이 다량 함유되어 있어 기존의 무기계 및 유기계 유화제보다 상 안정성이 우수하게 나타났으며 바이오디젤 원료유 생산 공정의 폐기물인 폐유과 폐수의 활용이 가능한 것으로 나타났다.

• Resources Recycling
• /
• v.10 no.3
• /
• pp.51-59
• /
• 2001

Impurities removal from waste carbon black was carried out to produce high-grade carbon black. A large amount of hydrophilic carbon black is produced as a byproduct of the hydrogen production process by flame decomposition of water. Due to its impurities content such as sulphur, iron, ash, etc., it can only be used as low-grade carbon or burnt out. High-grade hydrophilic carbon black is 3~5 times more expensive than oil-based carbon black because of high production cost associated with process complexly and pollutant treatment. Hydrophilic carbon is normally used for conductive materials for batteries, pigment for plastics, electric wire covering, additives for rubber, etc. In these applications, impurity content must be blow 1 fe. In this study, magnetic separation, froth flotation and ultrasonic treatment were employed to remove impurities from the low-grade hydrophilic carbon black. Results showed that the ash, iron and sulphur content of product decreased to less than 0.01 wt.%, 0.01 wt.% and 0.3 wt % respectively and the surface area of product was about 930 $m^2$/g for conductive materials.