• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.2
• /
• pp.328-332
• /
• 2006

Efficient finite field operation in the elliptic curve (EC) public key cryptography algorithm, which attracts much of latest issues in the applications in information security, is very important. Traditional serial finite multipliers root from Mastrovito's serial multiplication architecture. In this paper, we adopt the polynomial basis and propose a new finite field multiplier, inducing numerical expressions which can be applied to exhibit 3 times as much performance as the Mastrovito's. We described the proposed multiplier with HDL to verify and evaluate as a proper hardware IP. HDL-implemented serial GF (Galois field) multiplier showed 3 times as fast speed as the traditional serial multiplier's adding only partial-sum block in the hardware. So far, there have been grossly 3 types of studies on GF($2^m$) multiplier architecture, such as serial multiplication, array multiplication, and hybrid multiplication. In this paper, we propose a novel approach on developing serial multiplier architecture based on Mastrovito's, by modifying the numerical formula of the polynomial-basis serial multiplication. The proposed multiplier architecture was described and implemented in HDL so that the novel architecture was simulated and verified in the level of hardware as well as software.

• Journal of the Korea Concrete Institute
• /
• v.15 no.1
• /
• pp.1-10
• /
• 2003

The purpose of this study is to evaluate the capacities of repaired structural walls with different shear span ratios(1, 2, 3). Experimental tests were carried out. In this study three isolated large-scale wall specimens were made. The original wall specimens were tested until the drift reaches more than 3%. The region of the damaged specimen with the crack larger than 0.2 mm is replaced by new concrete. Also, severly distorted reinforcements were also replaced by new reinforcements. The crack smaller than 0.2 mm was cured by epoxy resin. Because of the space limitation of the laboratory the dimensions of all walls are the same. The shear-span ratio was controlled by the combination of axial and lateral force using the special test setting. All specimens were tested using the incremental quasi static cyclic load until failure occurs. Test results show that strength of repaired walls was almost equivalent to that of original walls. However, deformation capacities of repaired wall specimens are inferior to the original wall specimens.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.29 no.3
• /
• pp.232-241
• /
• 1984

A series of experiments were carried out to know the effects of pollen stage, cold shock temperature and duration, and media for callus and green plant induction in rice anther culture. The results indicated that: (a) uninucleate stage of pollen was the most suitable stage for effective callus induction, (b) cold shock temperature of 8$^{\circ}C$ and 12$^{\circ}C$ was appeared to be proper temperature for callus induction, (c) callus induction rate was increased in the eight to 12 days long cold storage, (d) the medium N6 was better than that of N6D for callus induction, (e) green plant induction was better in both 4$^{\circ}C$ and 8$^{\circ}C$ than that of 12$^{\circ}C$ cold shock, (f) green plant frequency was higher in eight to 12 days long cold storage and (g) green plant frequency was doubled in the MS medium when compared with N6 medium.

• Journal of Korea Society of Industrial Information Systems
• /
• v.19 no.6
• /
• pp.53-61
• /
• 2014

For monitoring the flight trajectory and the status of a launch vehicle, the mission control system in NARO space center process data acquired from the ground tracking system, which consists of two tracking radars, four telemetry stations, and one electro-optical tracking system. Each tracking unit exhibits its own tracking error mainly due to multi-path, clutter and radio refraction, and by utilizing only one among transmitted informations, it is not possible to determine the actual vehicle trajectory. This paper presents a way of generating flight trajectory via post-processing the data received from the ground tracking system. The post-processing algorithm is divided into two parts: compensation for atmosphere radio refraction and multi-sensor fusion, for which a decentralized Kalman filter was adopted and implemented based on constant acceleration model. Applications of the present scheme to real data resulted in the flight trajectory where the tracking errors were minimized than done by any one sensor.

• Proceedings of the Korean Society for Bioinformatics Conference
• /
• 2006.02a
• /
• pp.116-123
• /
• 2006

생물체의 cDNA를 유리기판위에 고밀도로 첨착 시킨 유전자 칩과 정량적인 방법으로 개별 유전자 발현을 진단 가능한 Real- time PCR (실시간 고분자중합연쇄반응 기술) 기법은 첨단 의학분야와 신약개발 및 독성유전체 연구분야에 활발히 도입되고 있는 기술이다. 본 발표의 첫 번째 부분에서는 유전자칩 에서 얻어진 유전자 발현패턴분석에 기반한 바이오마커 선정 및 real time PCR에 의한 확증 관련 기술 과 유전자칩에서 얻어지는 수많은 데이터를 재정렬 및 다양한 분석기법과 display기술을 활용하여 광범위한 화학물질에 대한 독성효과 분석을 가능하게 해주며, 특정 독성물질에 대한 관련유전자 그룹 발견 및 독성영향에 따른 분류방법에 관한 결과를 발표할 것이다. 또한 바이오마커 활용의 하나로 박테리아세포 기반 바이오센서 제작및 세포칩 개발등에 대한 결과도 추가될 것이다. 두 번째 부분에서는 non-model organism(유전체정보가 확보되지 않은 생물체)인 송사리를 이용하여 새로운 2K 유전자칩을 개발하고, 여기서 각종 화학물질에 대하여 얻어진 수많은 유전자칩 분석 데이타를 활용하여 각각의 화학물질이 보여주는 독성효과를 매우 효과적이고 쉽게 이해할 수 있는 display기술을 개발, 적용함으로써 유전자칩 발현에 기반한 화학물질 독성 screening 및 specificity discrimination을 가능케 하는 예가 발표될 것이다. 이 연구에서 개발한 송사리 유전자칩은 간조직의 RNA를 직접 cDNA화 하는 방식을 취하고 있어 전체 송사리의 유전정보를 필요로 하지 않아 비용 및 효율에서 전체 송사리의 유전정보를 얻는 비용과 노력을 취하지 않고 간에서 발생하는 독성학적 영향 및 유전자의 발현정도를 정밀하고 효율적인 방법으로 얻어 낸다. 현재 2000여개의 cDNA유전자중 50%이상의 유전자가 17베타에스트라디올, 페놀, 노닐페놀, 비스페놀, 감마레이조사, 잔류약품중 이보프란, 다이클로펜악, 농약중의 파라???R, 돌연변이 유발물질 중의 이티비알, 금속류중의 카드뮴을 통해 발현양상과 특정 캐미칼별 발현 특이성이 조사되었고, 이들 유전자는 염기서열 분석을 통해 염기서열이 분석되었으며, 미국 NCBI의 유전자 은행과의 비교를 통해 일부유전자는 새로운 유전자로 밝혀지고 있다. 또한 이 발표에서는 소염진통제계열 의약품인 dichlofenac 이 송사리의 각종 조직에 미치는 독성영향을 Real-time PCR을 이용하여 대표적 스트레스 유전자의 발현에 미치는 영향에 대한 분석 예가 발표될 것이다.

• Composites Research
• /
• v.14 no.4
• /
• pp.8-14
• /
• 2001

The satellite system experiences severe mechanical loads during the launch period. Therefore, the positive margin of safety of the satellite system must be demonstrated for every possible mechanical loading conditions during the launch period. This paper presents modal and stress analysis results due to quasi-static loads for the satellite antenna system. The failure tendency fur the sandwich construction of the satellite antenna system has been studied with various lamination angles of unidirectional prepreg.

• Resources Recycling
• /
• v.19 no.2
• /
• pp.10-18
• /
• 2010

This research investigates the feasibility of ceramic specimens made from Primary clay and Red Hwangto with MSWI fly ash. Specimens preduced by mix-design maximum 20 wt% MSWI fly ash were analysed by SEM, UTM, ICP, etc. As a result of measurement,$P_{10}$ specimen was improved on bending strength and $R_5$ specimen was improved on compressive and bending strength. Also amount of extracted heavy metal was suitable for regulatory limits. This indicates that MSWI fly ash is indeed suitable for the partial replacement of ceramic materials in bricks.

• Aerospace Engineering and Technology
• /
• v.8 no.2
• /
• pp.1-7
• /
• 2009

The Geostationary Ocean Color Imager (GOCI) is under development to provide a monitoring of ocean-color around the Korean Peninsula from geostationary platforms. It is planned to be loaded on Communication, Ocean, and Meteorological Satellite (COMS) of Korea. In this study, the radiometric model of GOCI, which is constructed based on the functional model of sub-system, is introduced. Non-linearity for each channel is analyzed in terms of linear gain and nonlinear gain by using the radiometric model. The non-linearity characteristic is validated by using test data which have been achieved during ground test at payload level. The non-linearity $G^3$/b shows identical characteristic for all channels.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05b
• /
• pp.255-258
• /
• 2004

Efficient finite field operation in the elliptic curve (EC) public key cryptography algorithm, which attracts much of latest issues in the applications in information security, is very important. Traditional serial finite multipliers root from Mastrovito's serial multiplication architecture. In this paper, we adopt the polynomial basis and propose a new finite field multiplier, inducing numerical expressions which can be applied to exhibit 3 times as much performance as the Mastrovito's. We described the proposed multiplier with HDL to verify and evaluate as a proper hardware IP. HDL-implemented serial GF (Galois field) multiplier showed 3 times as fast speed as the traditional serial multiplier's adding only Partial-sum block in the hardware.

• Korean Journal of Logic
• /
• v.13 no.2
• /
• pp.167-201
• /
• 2010

This paper aims to scrutinize the possibility of mereology as philosophically satisfiable metalogic. Motivation for this is straightforward. As I see, a traditional approach to metalogic presented in the name of mathematical logic posits the existence of mathematical entities such as sets, functions, models, etc. to give definitions of logical concepts like logical consequence. As a result, whenever logic is used in any individual sciences, this set-theoretical metalogic cannot but add these mathematical entities to the domain of them. This fact makes this approach contradict to the ontological conservativeness of logic. Mereology, however, has been alleged to be ontologically innocent, while it is a formal system very similar to set theory. So it may well be that some people thought of mereology as a good substitute for set theoretic metalanguage and concepts for ontologically neutral metalogic. Unfortunately, when we look into argument for the ontological innocence of mereology, we can find that mereological entities such as mereological sums or fusions are not ontologically neutral. Thus we can conclude that mereological approach to metalogic is not promising at all.