• Resources Recycling
• /
• v.27 no.3
• /
• pp.86-92
• /
• 2018

The amount of construction waste generated is steadily increasing every year, and the Law for Promotion of Recycling is enacted. However, it is difficult to use it as a recycled aggregate for concrete, which is presented in the quality standard of recycled aggregate with high water uptake and low density due to low separation of aggregate between concrete and cement paste. Therefore, in this study, a multi-stage impact crusher was used to remove mortar, which is essential for improving the quality of recycled aggregate. In analyzing the characteristics of the equipment, the spectrum of energy generated in each part between the particle and the equipment was calculated by using DEM. In order to generate an effective separation phenomenon, it was confirmed that the operation condition of 900 RPM was appropriate based on the ratio of the number of collisions (L/H) of the low energy group (L) to the number of collisions of the high energy group (H).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.5
• /
• pp.1716-1729
• /
• 2010

In this paper, we deal with a hierarchical ring-mesh optical network design problem. The objective is to minimize the total cost of optical add-drop multiplexers (OADMs) handling intra-ring traffic, optical cross-connects (OXCs) handling inter-ring traffic, and cabling cost among OADMs and among OXCs, while satisfying intra-ring and inter-ring capacities. We develop an integer programming (IP) formulation for the problem and devise some cutting planes that partially break the symmetry of rings. Dealing with the inherent computational complexity of the problem, we devise an effective heuristic procedure that finds a good quality feasible solution within reasonable computing times. Computational results demonstrate the efficacy of the proposed solution procedure; the developed symmetry breaking inequalities significantly reduce the computing time to find an optimal solution for small size problems, and the heuristic procedure finds a better feasible solution than that CPLEX, a commercial optimization software, finds for large size problems.

• The Korean Journal of Food And Nutrition
• /
• v.11 no.2
• /
• pp.150-158
• /
• 1998

Limit dextrin of Korean beer(3 brands) and Japanese beer(21 brands) were separated by ethanol fractionation. Limit dextrin of Korean and Japanese beer was estimated to be 1.1%. 1H-NMR analysis revealed that the limit dextrin showed both signal of $\alpha$-1, 4- and $\alpha$-1, 6- glucosidic linkage with its estimation ratio of average 5.5:1. Limit dextrin was hydrolyzed to glucose with the yield of 57.22% by Aspergillus awamori $\alpha$-glucosidase(24.7 unit) plus human salivay $\alpha$-amylase(2.4 unit) in 100${mu}ell$ of 0.043M acetate buffer at 37$^{\circ}C$ for 5 hour. Among them, limit dextrin of Korean beer showed the highest hydrolysis rate of 76%. Small size sugars (64.8%) removed by ethanol fractionation and limit dextrin(21.4%) hydrolyzed by amylases that is digestable sugar. Non hydrolyzed limit dextrin(13.8%) by the amylases which can be a growth factor of Bifidobacterium in human intestine.

• Journal of the Korean Geotechnical Society
• /
• v.30 no.8
• /
• pp.25-37
• /
• 2014

In load and resistance factor design (LRFD) method, resistance factors are typically calibrated using resistance bias factors obtained from either only the data within ${\pm}2{\sigma}$ or the data except the tail values of an assumed probability distribution to increase the reliability of the database. However, the data selection approach has a shortcoming that any low-quality data inadvertently included in the database may not be removed. In this study, a data quality evaluation method, developed based on the quality of static load test results, the engineering characteristics of in-situ soil, and the dimension of aggregate piers, is proposed for use in constructing database. For the evaluation of the method, a total 65 static load test results collected from various literatures, including static load test reports, were analyzed. Depending on the quality of the database, the comparison between bias factors, coefficients of variation, and resistance factors showed that uncertainty in estimating bias factors can be reduced by using the proposed data quality evaluation method when constructing database.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.133-133
• /
• 2016

화학저항식(Chemiresistive) 가스센서의 저항변화를 향상시키기 위해서는 센서 소재의 비표면적을 향상시키는 방향 및 전자천이를 증가시키는 방향으로 연구가 진행되어야 하며, 그 중 센서의 비표면적을 향상시키는 예로써 중공 나노섬유가 있을 수 있다. 본 연구에서는 비표면적의 향상뿐만 아니라 중공 나노섬유의 전자천이를 증가시켜 센서의 검출 성능을 더욱 향상시키기 위한 목적으로 $TiO_2/ZnO$ 이중층 중공 나노섬유를 제안하었다. 제안된 $TiO_2/ZnO$ 이중층 중공 나노섬유는 템플레이트 합성법을 통해 제작되었으며, 그 공정은 다음과 같다; 전기방사(Electrospinning) 공정을 통해 폴리머 나노섬유를 제작한 후 $TiO_2$ 층과 ZnO 층을 ALD(Atomic Layer Deposition) 공정을 통해 차례대로 증착시킨다. 그 후 후열처리 공정을 통해 코어 폴리머를 제거함으로써 $TiO_2/ZnO$ 이중층 중공 나노섬유를 얻을 수 있다. 이 때, ZnO 층의 두께는 각각 달리하여 제작되었으며, 최종적으로 이들에 대한 가스 센싱 특성 및 메커니즘에 대한 체계적인 조사를 진행하였다. 단층 중공나노섬유는 셀 층의 두께가 Debye length와 유사할 때 셀 층 표면이 완전공핍층이 형성되고, 그 보다 크게 되면 부분적인 공핍층이 형성되게 되어 감응도가 감소하게 된다. 그러나 이중층 중공 나노섬유의 경우 셀 층의 두께가 Debye length 보다 더 크게 되더라도 TiO2와 ZnO의 헤테로접합으로 인해 ZnO에서 TiO2로 전자의 이동을 야기시키게 되어 환원성 가스에 대한 감응도가 단층 ZnO 중공 나노섬유에 비해 향상되게 된다.

• The Journal of the Acoustical Society of Korea
• /
• v.27 no.7
• /
• pp.386-393
• /
• 2008

This paper proposes a new approach for speech enhancement in highly nonstationary noisy environments. The spectral subtraction (SS) is a well known technique for speech enhancement in stationary noisy environments. However, in real world, noise is mostly nonstationary. The proposed method uses an auto control parameter for an adaptive threshold to work well in highly nonstationary noisy environments. Especially, the auto control parameter is affected by a linear function associated with an a posteriori signal to noise ratio (SNR) according to the increase or the decrease of the noise level. The proposed algorithm is combined with spectral subtraction (SS) using a hangover scheme (HO) for speech enhancement. The performances of the proposed method are evaluated ITU-T P.835 signal distortion (SIG) and the segment signal to-noise ratio (SNR) in various and highly nonstationary noisy environments and is superior to that of conventional spectral subtraction (SS) using a hangover (HO) and SS using a minimum statistics (MS) methods.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.42 no.4
• /
• pp.331-339
• /
• 2015

The first priority of sedation for incorporative children in pediatric dentistry is a safety. Therefore, evidence-based practices in health care are needed for preventing medical accidents. In accordance with the rise of the evidence based medicine, the interest in Evidence-Based Dentistry is increasing in the field of dentistry. However, systematic research about Evidence-Based sedation in Korea has rarely been done. As such, the purpose of this systematic review is to critically analyze the available scientific literature regarding dental sedation and to seek the next developmental strategies about evidence based pediatric dental sedation. A broad search of the 5 databases of the systematic reviews manual of the National Evidence-based Healthcare Collaborating Agency in Korea were referenced: 1) Core search database- KMbase, KISS; 2) Academic information and portal; 3) the National Assembly Library; 4) DBpia, and 5) RISS. Of a total 470 themes limited to the search term of "dental sedation", in accordance with the PRISMA statement for reporting systematic reviews of health sciences interventions, a literature selection process, which includes the removal of overlapping down the flow chart, was performed. Of the remaining 31 articles, two authors read through articles independently and added or removed articles using the exclusion criteria. Finally, twenty published papers of acceptable quality were identified and reviewed. This systemic review of Korean pediatric dental sedation practices for the last twenty-five years was based on the objective criteria defined in the GRADE process and identified consistent evidence. The results were evidence of moderate quality. Therefore, more systemically well-designed clinical studies are needed about the safe use of a sedative medicines (drugs).

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.05a
• /
• pp.165-168
• /
• 2008

With the development of the information technology in recent years, the innovation of multimedia information technology also has been accelerated. Many fields of the digital image processing technologies as image data compression, recognition. restoration, etc. are now being studied actively. When transmitting and saving digital images, noise would be made, and we are using the image filters to remove the noise. The Image Filter used Digital Image Process basically has a two-dimensional structure. There are two methods of the filter's creation - One is reiterating one dimension, and the other is using an indivisible two-dimension image filter. The space domain method using mask is the latter one. That is inserting the value-multiplied pixels values faced each other when the two-dimension filter overlapped on input image- to the filter value's center position and the same position in the image. The image filter is being used widely along with one-dimension filter, according each noise. Most people are using various median filters to remove the impulse noise. However, in this paper, I suggested a powerful switching median filter and compared with conventional method for verification.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.1812-1816
• /
• 2009

이미지 해석에 의한 유속장 측정방법은 유체역학분야에서 지난 30 여년 동안 많이 활용되어온 속도측정 기법으로 오늘날에는 이를 수공학 분야에서 이를 유량측정 등 수리현상 해석에 활용하려는 시도가 다각적으로 이루어지고 있다. 이에 본 연구에서는 이미지 해석에 의한 유속장 측정방법을 용담댐 시험유역에 적용하여 그의 자연하천에서의 적용성을 검토하고자 한다. 이미지 해석에 의한 유속장 측정방법은 PIV(Particle Image Velocimetry)로 통칭되고 있으며, PIV는 seeding, illumination, recording, 및 image processing의 네 가지 요소로 구성된다. seeding을 위해서 유체를 따라 흐를수 있는 작은 입자를 유체에 첨가한다. 유체를 따라 흐르는 입자들의 선명한 이미지를 얻기 위해서illumination이 필요하다. PIV를 이용하여 흐름을 해석하기 위한 illumination은 일반적으로 이중펄스 레이저가 이용된다. 이렇게 유속장 해석을 하려는 유체에 대하여 seeding 및 illumination이 준비되면 단일노출- 다중 프레임법, 혹은 다중노출-단일 프레임법으로 흐름을 recording을 한다. image processing은 이미지를 다운로드하고, 디지타이징 및 화질향상을 하는 전처리(pre-processing), 상관계수의 산정에 의한 유속 벡터의 결정 및 에러 벡터를 제거하고 유속장을 그래프화하는 후처리(post-processing) 과정으로 구성된다. LSPIV(Large Scale PIV)는 PIV의 기본원리를 근거로 하여 기존의 PIV에 비하여 실험실 내에서의 수리모형실험이나 일반 하천에서의 유속측정과 같은 큰 규모$(4m^2\sim45,000m^2$)의 흐름해석을 할 수 있도록 Fujita et al.(1994)와 Aya et al.(1995)이 확장시킨 것이다. PIV와 비교시 LSPIV의 다른 점은 넓은 흐름 표면적을 포함하기 위하여 촬영시에 카메라의 광축과 흐름 사이의 각도가 PIV에서 이용하는 수직이 아닌 경사각을 이용하였고 이에 따라 발생하는 이미지의 왜곡을 제거하기 위하여 이미지 변환기법을 적용하여 왜곡이 없는 정사촬영 이미지로 변환시킨다. 이후부터는 PIV의 이미지 처리 방법이 적용되어 표면유속을 산정한다. 다만 이미지 변환을 PIV 이미지 처리 전에 하느냐 후에 하느냐에 따라 유속장 해석결과에 차이가 있다. PIV의 네가지 단계를 포함하여 LSPIV의 각 단계를 구분하면, seeding, illumination, recording, image transformation,image processing 및 post-processing의 여섯 단계로 나뉘어진다 (Li, 2002). LSPIV를 적용시 물표면 입자의 Tracing을 위하여 자연하천에서 사용하기에 적합한 환경친화적인 seeding 재료인 Wood Mulch를 사용하여 유속을 측정하였다. 적용지점은 용담댐 상류의 동향수위관측소 지점으로 이 지점은 한국수자원공사의 수자원시험유역이 위치하고 있다. 이미지의 촬영은 가정용 비디오 캠코더 (Sony DCR-PC 350)을 이용하여 두 줄기의 흐름에 대하여 각각 약 5분 동안의 영상을 촬영한후 이중에서 seeding의 분포가 잘 이루어진 약 1분간을 추출한후 이를 이용하여 PIV 분석에 이용하였다. 대체적으로 유속장의 계산이 무난하게 이루어지었으나 비교적 수질 상태가 양호하고, 수심이 낮고, 하상재료가 자갈로 이루어져 있어 비슷한 색상의 seeding 재료를 추적하기 어려운 구간이 발생한 부분에서는 유속의 계산이 정확히 이루어지지 않았다.

• Korean Journal of Remote Sensing
• /
• v.36 no.5_1
• /
• pp.707-723
• /
• 2020

In this study, a decision tree type of quality control (QC) method was developed to improve the temporal-spatial representation and accuracy of the visibility data being operated by the Korea Meteorological Administration (KMA). The quality of the developed QC method was evaluated through the application to the 3 years (2016.03-2019.02) of 290 stations visibility data. For qualitative and quantitative verification of the developed QC method, visibility and naked-eye data provided by the KMA and QC method of the Norwegian Meteorological Institute (NMI) were used. Firstly, if the sum of missing and abnormal data exceeds 10% of the total data, the corresponding point was removed. In the 2nd step, a temporal continuity test was performed under the assumption that the visibility changes continuously in time. In this process, the threshold was dynamically set considering the different temporal variability depending on the visibility. In the 3rd step, the spatial continuity test was performed under the assumption of spatial continuity for visibility. Finally, the 10-minute visibility data was calculated using weighted average method, considering that the accuracy of the visibility meter was inversely proportional to the visibility. As results, about 10% of the data were removed in the first step due to the large temporal-spatial variability of visibility. In addition, because the spatial variability was significant, especially around the fog area, the 3rd step was not applied. Through the quantitative verification results, it suggested that the QC method developed in this study can be used as a QC tool for visibility data.