• 전기의세계
• /
• v.17 no.2
• /
• pp.27-31
• /
• 1968

최근 각종 회전전기의 설계제작에 있어서 그경제성과 신뢰성을 높이고저 가능한 한고속화 내지는 단일화 경향에 있다. 예로써 1,500MV급 주발전기라면 8MW라는 려자전력이 필요하므로 이를 종래의 직결직류려자기방식으로서는 정류조건에서 제한을 받게된다. 고로이러한 난문제의 해결책으로서 직류여자기의 감속, 별치의 M-G Set, 또는 이중전기자법등이 고찰되고 있으나 역시 과담한 경제문제를 수반하게 된다. 또한 각종산업의 발달에 따라 요구되는 부하특성과 가혹한 환경조건에서 운전되어야할 경우가 증가되고 있다. 즉 염소Gas, 아유산 Gas, 인화유기 또는 공해상등을 막론한 주위조건에서 방식방폭의 안정성과 소형경량화의 경제성등을 설계의 주요목적으로 본다. 이것은 회전전기의 고정자와 회전자간에 전달되는 전기적 Energy가 회전기계의 가장 약점인 탁동부분을 통과하기 때문이다. 여기에서 탁동부를 제거할 수단으로 Brushless 려자방식이 고안되었으며 오래전부터 그 Idea가 창안되어 있었으나 최근 갑자기 극소용량급에서 초대용량급에 이르기까지 Brushless화 되었음은 재료과학에서 본 자기증중기 또는 반도체공학의 발달이 크게 영향하였다. 필자는 여기에 발전기를 중심으로 Brushless 려자방식의 종류와 문제점을 검토하여 금후 발전될 전망에 대하여 간단히 논한다.

• Journal of KSNVE
• /
• v.8 no.6
• /
• pp.1150-1157
• /
• 1998

In this Paper, we present an efficient method for finite element vibration analysis of constantly rotating structures with cyclic symmetry, which are deformed to some considerable extent by centrifugal force, Coriolis force and operating load, and vibrate due to several types of exciting forces. A structure with cyclic symmetry is composed of circumferentially repeated substructures with the same geometry. Being only one substructure modeled. the dynamic characteristics of the structure can be analyzed systematically. rapidly and exactly using discrete Fourier transform by means of a computer with small memory.

• Journal of the KSME
• /
• v.30 no.6
• /
• pp.542-547
• /
• 1990

가스터빈은 브레이턴사이클을 이용한 것으로서 피스톤 왕복엔진과 함께 동력기관으로써 지금까지 사용되고 있으며 특히 경량, 고출력의 장점으로 인해 항공기 엔진의 추진기로서 많이 사용되고 있다. 1905년 프랑스에서 압축비 4.8회전수 4250rpm으로 40HP의 출력을 내는 현재와 같은 형 태의 가스 터빈을 개발한 이후 많은 발달과 함께 2차 대전 후에는 항공용 뿐만 아니라 발전용, 동력용 등 산업용 엔진에도 응용되었다. 세계적으로는 유럽이 가스 터빈에 관한 연구를 미국보 다 앞서 활발히 진행하였으며 1957년 General Electric사의 F-4팬텀에 사용된 J-79터보 제트 엔진을 개발함으로써 가스터빈 엔진분야에 미국이 주도권을 잡게 되었고 많은 전문회사가 가스 터빈 엔진설계 제작에 참여하고 있다. 이와 같이 가스 터빈에 대한 개발연구가 계속 이루어진 것은 가스 터빈이 다른 동력기관 보다 단위 중량당 많은 출력을 낼 수 있고, 각 요소들이 회전 운동을 함으로써 고속운전을 할 수 있고, 부하 변동에 빨리 적응하며, 마찰부분이 적어 윤활유 소비가 적은 장점들이 있기 때문이다. 본 글에서는 이와 같은 가스 터빈 연구개발의 국내외 현황 및 그 전망에 대해서 기술하고자 한다.

• Proceedings of the KIPE Conference
• /
• 2007.07a
• /
• pp.262-264
• /
• 2007

최근 전압 및 주파수 가변을 이용하여 전동기의 속도를 제어하여 전동기 경부하시 베인에서 소모되는 에너지 절감효과를 얻을 수 있는 인버터 시스템이 널리 사용되고 있다. 이에 전력연구원은 6.6kV, 1MVA급 인버터 개발 및 동해화력 발전처에 설치, 보일러 점화 전/후 시험, 계통 병입 후 부하 시험 등을 국내 최초로 성공적으로 완료하여 현재 이차 공기 송풍기 구동용 인버터는 상업 운전 중이다. 본 논문에서는 기존 동해화력 발전 설비와 신규 인버터 시스템의 인터페이스 부분에 해당하는 보일러 DCS 로직과 계통 병입 후 시운전 결과에 대하여 상세히 기술하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.12
• /
• pp.2625-2632
• /
• 2009

Recently, a speed control method of induction motor by vector control theory is applied to highly efficient industrial field. The speed sensors attached to motor are used for detection of rotating speed. In the case using speed sensor, the installation of cable for minimization of electric noise, weaken maintenance, increase of price are demerit. Therefore the study of speed sensorless vector control theory performed activity. The design of sensorless vector controller for induction motor using tabu search is studied. The proposed sensorless vector control for Induction Motor is composed of two parts. The first part is for optimizing the speed estimation with initial PI parameters. The second part is for optimizing the speed control with initial PI parameters using tabu search. Proposed tabu search is improved by neighbor solution creation using Triangular random distribution. In order to show the usefulness of the proposed method, we apply the proposed controller to the sensorless speed control of an actual AC induction Motor System. The performance of this approach is verified through simulation and the experiment.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.4
• /
• pp.197-203
• /
• 2014

The technology to predict and prevent an accident of the cable system in power station is required. The techniques of inactivated diagnosis, partial discharge and $tan{\delta}$, have been adopted to diagnoze the operating characteristics of cables, but it is not so easy to find out problems in cables in an inactive state before the cable accident happens. In this paper, we did a research on the 6.6kV high-power cables, installed at Korean Western Power Station Co., Ltd. in order to diagonize the cables, playing a major role at the station. We have developed an equipment to measure an insulation resistance based on the temperature and current of the cable. By installing the system in a power station, we could find abnormal status for evaluation of the lifetime. In the short term, by analyzing the data, we apply the research result to the diagnosis and evaluation of the 6.6kV power cables. In the long run, however, we plan to reduce the cost of the installation and operation of cable systems at power stations.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.1
• /
• pp.21-27
• /
• 2015

In order to meet the current emission regulations (EURO-6), it is necessary to significantly reduce $CH_4$ and $NO_X$ emissions. This study investigated the effect of a reduction in the valve overlap on the combustion and emission characteristics of a hydrogen-compressed natural gas engine under a part-load operating condition. The combustion and emission characteristics were analyzed for each fuel using the original camshaft and an altered camshaft with reduced valve overlap. The results showed that the thermal efficiency was decreased and the fuel flow was increased when using the altered camshaft. The $CO_2$ and $CH_4$ emissions were increased as a result of the reduced thermal efficiency. Under lean operating conditions, the $NO_X$ emission was decreased compared with one of the conventional camshaft. Thus, under the same fuels and operating conditions, it had a harmful influence on the emission characteristics and thermal efficiency.

• Journal of Energy Engineering
• /
• v.2 no.1
• /
• pp.28-37
• /
• 1993

This paper describes the development of a dynamic model of 1,000 MW$\_$e/ nuclear power plant including its local and integrated control system. The model was constructed using the Modular Modeling System (MMS) developed by the Electric Power Research Institute (EPRI) to provide an efficient, economical and user-friendly computer code for use in the analysis of the dynamic performance of nuclear and fossil power plants in conjunction with the Advanced Continuous Simulation Language (ACSL). Steady state for full load and transient results for turbine power step changes of loft are presented in this paper. The model includes most major components of a 1,000 MW$\_$e/ nuclear power plant and it can readily be modified to simulate a specific power plant. This procedure greatly reduces the analysis and modeling efforts involved in dynamic simulation of power plants and increases confidence in the analysis results.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.6
• /
• pp.4260-4266
• /
• 2015

In this study, the optimal control method for minimizing of energy consumption for central cooling system with proper occupant comfort level is researched by simulation. The optimal control method is that the optimal set temperatures such as the condenser water temperature, supply air temperature, and chilled water temperature with environment variable change such as outdoor air dry-bulb and wet-bulb temperatures are obtained by suggested optimal control algorithm with maximum and part building load. The TRNSYS program is used for system modeling and the control performances with the suggested optimal control method are compared with the existing control method of fixed set points. The suggested optimal control method shows better responses in energy consumption in comparison with existing control ones.

• Design Convergence Study
• /
• v.17 no.4
• /
• pp.17-29
• /
• 2018

In the semi-autonomous vehicle, before reaching a fully autonomous driving stage, it is imperative for the system to issue a take-over request(TOR) that asks a driver to operate manually in a specific situation. The purpose of this study is to compare whether head-up display(HUD) is a better human-vehicle interaction than head-down display(HUD) in the event of TOR. Upon recognition of TOR in the experiment with a driving simulator, participants were prompted to switch over to manual driving after performing a secondart task, that is, playing a game, while in auto-driving mode. The results show that HUD is superior to HDD in 'ease of use' and 'satisfaction' although there is no significant difference in reaction time and subjective workload. Therefore, designing secondary tasks through HUD during autonomous driving situation improves the user experience of the TOR function. The implication of this study lies in the establishing an empirical case for setting up UX design guidelines for autonomous driving context.