• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.25 no.1
• /
• pp.24-28
• /
• 1989

This paper describes a fundamental method to suppress vibration of a structure under excitation by attaching a impact absorber. The influence of the shape of impact absorber, such as weight of add mass, impact clearance, contacting area and the exciting frequency on suppressing vibrations of the structure is investigated. The effectiveness of the proposed vibration absorber is demonstrated experimentally.

• Journal of Korean Society of Steel Construction
• /
• v.10 no.3 s.36
• /
• pp.473-486
• /
• 1998

A numerically stable technique to remove the limitation in choosing a shift in the subspace iteration method with shift is presented. A major difficulty of the subspace iteration method with shift is that because of singularity problem, a shift close to an eigenvalue can not be used, resulting in slower convergence. This study solves the above singularity problem using side conditions without sacrifice of convergence. The method is always nonsingular even if a shift is an eigenvalue itself. This is one of the significant characteristics of the proposed method. The nonsingularity is proved analytically. The convergence of the proposed method is at least equal to that of the subspace iteration method with shift, and the operation counts of above two methods are almost the same when a large number of eigenpairs are required. To show the effectiveness of the proposed method, two numerical examples are considered.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.2
• /
• pp.106-113
• /
• 2011

This paper was conducted on experimental analysis in the free vibration analysis of rectangular plates under uniform thermal loading. Materials of three rectangular plates were aluminum, steel and stainless-steel respectively. The dimension of rectangular plates was 0.1 $\times$ 0.1 $\times$ 0.002 m. Infrared quartz lamps were used for thermal loading. The PCS(Power Control System) electric control system was applied for control and scanning vibrometer (Poly Tech) was used for acquisition of frequency response function. Applied temperature was increased from room temperature to $300^{\circ}C$ by $50^{\circ}C$. Boundary condition was free-free condition using bungee cord. Front face of rectangular plate was heated uniformly.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.12 no.3
• /
• pp.371-383
• /
• 1999

An efficient and numerically stable eigensolution method for structures with multiple natural frequencies is presented. The proposed method is developed by improving the well-known subspace iteration method with shift. A major difficulty of the subspace iteration method with shift is that because of singularity problem, a shift close to an eigenvalue can not be used, resulting in slower convergence. In this paper, the above singularity problem has been solved by introducing side conditions without sacrifice of convergence. The proposed method is always nonsingular even if a shift is on a distinct eigenvalue or multiple ones. This is one of the significant characteristics of the proposed method. The nonsingularity is proved analytically. The convergence of the proposed method is at least equal to that of the subspace iteration method with shift, and the operation counts of above two methods are almost the same when a large number of eigenpairs are required. To show the effectiveness of the proposed method, two numerical examples are considered.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.6
• /
• pp.83-91
• /
• 2005

This paper describes the structural strength test technique and the results for cylindrical supersonic vehicle subjected to both aerodynamic load and thermal load. The special positioning system using spring links was designed to float, support and restrain the test airframe during the test and the down-time. The hydraulic system and the electric heating system were utilized to apply the aerodynamic load and the thermal load to the test airframe together. Particularly, several hundreds of infrared quartz lamps were used for the heating system, and the thermal test conditions were successfully simulated. The test results showed that this kind of high temperature test is adequate to verify the structure integrity and produce useful engineering data which is necessary for the possible structural modification under thermal environments.

• The Korean Journal of Rheology
• /
• v.9 no.4
• /
• pp.174-182
• /
• 1997

결정성 고분자수지는 가공조건에 의해 결정되는 미세구조의 변화에 따라 최종물성 이 현저히 달라지므로 최종 성형품의 물성을 극대화하기 위해서는 성형가공 중에 필연적으 로 부가되는 열이력 뿐만 아니라 전단이력이 결정화 거동에 미치는 영향을 규명하고 가공조 건의 최적화를 통하여 미세구조를 적절히 제어하는 것이 요구된다. 따라서 본 연구에서 in-situ 상태로 전단유도 결정화거동을 조사할수 있는 rheo-kinetic 실험 방법을 개발하고 결정화 거동에 미치는 열이력과 전단이력의 영향을 규명하고자 하였다. 이를 위해 비교적 결정화 속도가 빠른 폴리 부틸렌 테레프탈레이트 수지를 대상으로 냉각조건, 전단부가시간, 전단속도등을 다양하게 변화시키면서 plate-plate 레오미터로 시간에 따른 전단응력의 변화 를 조사하는 rheo-kinetic 연구를 수행하였다. 아울러 실험 중에 액체 질소로 급냉하여 얻은 시료를 대상으로 등온 및 비등온의 열분석 실험을 수행하고 JMA식과 Hoffman-Lauritzentlr 을 사용하여 분석한 다음, 그 결과를 rheo-kinetic 해석결과와 비교함으로써 결정화 거동에 미치는 전단응력의 영향을 규명하였다. 일정전단속동하에서 수행한 rheo-kinetic 실험결과, 시간에 따른 저난응력의 증가와 용융열이 증가하는 경향이 매우 유사한 거동을 보이므로 전 단응력의 증가는 결정화가 일어남에 기인한 결과임을 확인할수 있었으며 고분자수지가 전단 이력을 받게 되면 분자배향의 결과로 결정화 유도시간이 짧아지고 결정화속도가 증가할 뿐 만 아니라 보다 더 높은 온도에서 결정화가 일어나게 됨을 알수 있었다. 또 결정화 반가기 시간과 Hoffman-Lauritzen 식의 매개변수들이 전단속도, 전단부가시간, 결정화 온도 등의 이력에 무관하게 전단응력에 따라 선형적으로 변하고 있으므로 전단유도 결정화거동은 수지 에 부가되는 전단응력에 직접적인 영향을 받음을 알수 있었다. 이상과같은 전단유도 결정화 거동에 관한 결과를 가공공정상의 열전달 현상과 결합하여 해서하면 성형품 내부의모폴로지 의 예측이 가능하므로 성형품 물성의 극대화 방안의 수립에 이용될수 있을것으로 사료된다.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2003.05a
• /
• pp.297-302
• /
• 2003

국내 화학공업에 있어서 두드러진 특징중의 하나는 의약품, 염·안료 등과 같은 부가가치가 매우 큰 제품을 제조하는 정밀화학공업이 대부분을 차지하고 있으며, 반응기는 회분식으로 대상이 되는 공정의 반응조건 등을 제조자 스스로 결정해야 하는 것이 많아 오조작이나 열분해반응이나 폭주반응과 같은 이상반응 발생 시 조기 제어 미흡 등으로 인한 화재 폭발 등 중대사고가 발생할 위험성이 매우 크다. 실제로 회분식 반응기에 의한 사고가 빈번히 발생하였고 사고에 의한 피해도 심각하다.(중략)

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.5 no.3
• /
• pp.182-190
• /
• 1993

A numerical technique is presented to calculate the motions of 6 d.o.f and mooring tensions for a catenary moored floating breakwater. The breakwater may be subjected to the 3-D combination of regular or irregular waves and stationary forces. The added mass coefficients at the infinitive frequency of input wave and the variations of damping and exciting force coefficients are calculated using the source distribution method. The coefficients are used to constitute motion equations in time domain which are solved by WiIson-$\theta$ method. The solutions agree quite well with either static displacement determined from Newton method under the stationary force only or 6 d.o.f determined from the frequency domain analysis under regular wave only. An example analysis is also done for a floating breakwater to demonstrate its applicability.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.11
• /
• pp.1006-1012
• /
• 2007

In this paper, a suboptimal homing guidance law for the homing missiles with an impact angle constraint is presented. Unlike general LQ optimal control, the aided loop ensuring some degrees of freedom for the constraint is introduced. Then an optimal feedback loop in consideration of the aided loop is designed by using Schwartz inequality. The aided loop is synthesized with the optimal control to produce the guidance command. Furthermore, to investigate the characteristics of the guidance law we carry out the comparative studies with other guidance laws. The results of the various computer simulations show the good performance of the proposed law.

• Restorative Dentistry and Endodontics
• /
• v.33 no.5
• /
• pp.443-451
• /
• 2008

The purpose of this study was to evaluate the effect of additional etching procedure prior to Maxcem resin cement application in indirect restoration cementation using push-out bonding strength. One hundred and two extracted human molars were used to make indirect resin restorations of gold inlay and Synfony. These restorations were cemented using Maxcem and Variolink II. Additional etching procedures were done for one group with Maxcem. Three groups have 17 specimens in both restoration types. Push-out bond strength was measured using multi-purpose tester and calculated for bonding strength per sqaure-millimeter area. The mean bonding strength values were compared using SPSS 12.0K program for one-way ANOVA and Scheffe's Test with 95% significance. Under the condition of this study, the additional etching procedure prior to usage of Maxcem resulted in reduced bond strength for both of restoration types.