• 한국생활과학회지
• /
• 제14권4호
• /
• pp.673-681
• /
• 2005

Sewing is an important process in clothes-making. It is directly or indirectly connected to a factor of fitness, as is the case of pattern making and design. The purpose of this study is to compare and analyze the sewing methods for tight skirts currently being sold by twelve clothing companies on the market. For the purpose, the skirts, which was released in 2002 Fall season, was physically disassembled and then every sewing detail was closely investigated. The major findings are as follows: All sorts of the skirts show different sewing methods in hemlines, back slits, and zipper. Hemlines and zippers, hand-sewn, are often used by high-price brands. Brands that emphasize trends usually use machine sewing. Specifically, the sewing methods applied in the allowances at the upper part of the back slit show significant differences among brands. One method leaves allowances enough in both sides for the stability of the skirts, another trims both allowances very closely, and the other trims only left-side allowance down to the edge of the back slit. This study findings will be helpful not only in understanding sewing techniques for skirts and improving its quality, but also in offering more comfortable and superior clothes for consumers.

• 감성과학
• /
• 제7권2호
• /
• pp.157-161
• /
• 2004

경사의 사선방향으로 절단하여 봉제된 바이어 컷 직물로 제조된 의류는 일반 의류와 달리 우아한 외관을 나타낸다. 이 직물의 단점은 형태안정성이 나빠서 완제품의 형태가 패턴의 형태와 다른 모양을 나타내는 경우가 많으며, 특히 밑단 부분이 불균일하게 쳐지므로, 가지런히 절단하는 트리밍 공정을 부가적으로 거치게 된다. 현재의 봉제 공정에서는 트리밍 단계를 모두 숙련공들의 수작업에 의존한 평면 커팅 방법으로 수행하기 때문에 작업자의 피로도에 따라 불량품이 양산되고 그에 따른 소비자들의 불만 요인도 높아지므로, 본 연구에서는 치수조절 마네킹을 제조하여 실제 의복 착용 상태를 그대로 재현한 후, 회전시키면서 스스로 회전하는 자동 커터에 의해서 공간상에서 트리밍하는 3-D 입체 시스템을 개발하였다. 이 시스템에 의하여 제조된 의류는 트리밍 라인이 균일하고 매끄러우며, 안감이 밖으로 밀려나오는 경우가 없어 품위가 있는 외관을 나타내었다. 또한 수작업에 비하여 제조 속도가 훨씬 빠르므로 봉제 후공정에서의 의류 제조 시간을 획기적으로 단축하는 신속 생산 시스템의 요소로서 충분히 사용될 수 있는 가능성을 나타냈다.

• 복식
• /
• 제57권2호
• /
• pp.1-10
• /
• 2007

This study aims at the improvement of sewing function through understandings of dynamic property about the sewing methods and the thread material selection in knitwear. The tensile strength and shear of KES-FB and the Instron were measured for the analysis of the mechanical properties. The knit cloth was structured In the plain stitch, $1\times1$ rib stitch and $2\times1$ rib stitch with the combination of wool and cotton. With regard to the sewing method, intralooping and interlacing were applied. For thread materials, polyester, cotton, wool and silk were used. Since silk has the lowest extension and similar values regardless of its construction in intralooping, it is available knit apparel with uniform elastic recoverv. It also has small shearing resistance. It can be used in apparel which needs big mobility, but it causes rutting problem. Therefore, it is suitable to use intralooping. When the same sewing yarn and textile are use, it can lower shearing resistance and extension in intralooping, Since wool needs a lot of extension energy and it can be cut, intralooping is more suitable than interlacing in sewing of wool. In interlacing using polyester, extension and shearing resistance are high. Therefore, it is suitable for knit sewing with high massing. Silk is not suitable for interlacing since it can be rut. Even though knit materials are different, the RT values of polyester and cotton are similar in same construction. Therefore, they can be substituted each other considering resilience after sewing.

• 한국복식학회:학술대회논문집
• /
• 한국복식학회 2005년도 International Costume Conference PROCEEDING
• /
• pp.150-151
• /
• 2005

• 복식문화연구
• /
• 제17권5호
• /
• pp.769-779
• /
• 2009

The purpose of this study is proposing a knitting method that is suitable for the bodies of women in their 20's and can enhance aesthetic aspect and wearing satisfaction. For this study, four kinds of seamless knit one-pieces were implemented by different knitting method of waist dart each other. The inspection of the exterior and the sensory test of movement adaptability were included in this study. The results of this study were listed below. Exterior evaluation of the four samples results that the sample with outside narrowing and widening get low grade. Thus, we can see that the method having only outside narrowing and widening for waist shaping can cause problems. In addition to that, the sample with inside narrowing and widening get highest grade for almost all test items. The dressing evaluation results that the knitting method of waist dart affect only on the exterior but not on the movement adaptability of the seamless knit one-piece.

• 한국의상디자인학회지
• /
• 제12권4호
• /
• pp.137-147
• /
• 2010

This study set out to make experimental clothes by giving variations to the connecting part of a seamless sweater, propose designs and composition approaches to improve the wearing sensation and satisfaction with appearance through wearing trials, and provide basic data that would be of practical help to follow-up study on seamless knit and the growth of seamless knit in the Korean knit industry. The connecting part is the biggest characteristic and the most important part in seamless knitwear and affect the functionality and fitness of the clothes and the appearance of the armhole. The investigator thus made five different pieces of experimental clothes according to the composition methods for connecting part and put them to the test by a group of experts for appearance assessment. The assessment results were analyzed through Analysis of variance(ANOVA), and the items with similar results were put to the Duncan test for intergroup comparison. According to the analysis results, experimental clothes C and E received the highest evaluation in almost every assessment item, whereas experimental clothes A did the lowest appearance evaluation.

• 복식문화연구
• /
• 제17권6호
• /
• pp.1059-1067
• /
• 2009

The knitting method of the sleeves for improving movement adaptability were studied in this paper. The purpose of this study is proposing a knitting method that is suitable for the bodies of women in their 20's and can enhance wearing satisfaction. To see the effect of the bind-off length at the axilla, a movement adaptability test was undertaken for 4 samples that have bind-off at bodices. In addition to that, the analysis of their sliding distance with respect to the human motions were executed. The results of this study were listed below. Its result was that the samples with small bind-off lengths represent better wearing satisfaction than the samples which have large bind-off lengths. The comparison of the sliding distances at the hem, waist and sleeves with respect to the tester's motions also shows that the sample having small bind-off makes better result than the sample with large bind-off. It was observed that the optimal length of bind-off was 2cm for the improvement of the sleeve functionality.

• 복식문화연구
• /
• 제16권3호
• /
• pp.425-431
• /
• 2008

The purpose of this study was to observe the changes of skirt length of knitted flare skirts when the seamless test garments were made which had been having full shape while being knitted and to change and amend the challenges in advance when those were knitted. For this study, I made 6 kinds of knitted test garments of wool 100% yarn with seamless knitting machine, which differed from each other by skirt angles ($90^{\circ},\;180^{\circ}$) and gauges (7G, 12G, 15G), and then I measured deflection changes of their length for 2 weeks. Findings and conclusions drawn from this study were as follows: First, the side seam line of full shape hecame somewhat longer than center. Second, 7G and $180^{\circ}$ knitted flare skirt showed the biggest length deflection changes. Third, there was no difference at rear waist deflection changes between front pattern and rear. Fourth, it was difficult to control the tensions of right and left strings as to the knitting directions.

• 한국의류학회지
• /
• 제31권11호
• /
• pp.1510-1519
• /
• 2007

This comparative study analyzes and compares tight skirt sewing methods which are found in the clothing configuration reference text books available in contemporary universities and which are used in commercially-available domestic consumer products. The study samples included 15 text books and 12 tight skirt consumer products of different brands on sale at three department stores in Seoul each of which had a belt, a back-centered zipper, and back double slits. The findings of the study are summarized as follows: First, text books mainly show very basic sewing methods of using zippers on both sides of the straight-lined waist belt. This indicates that it is necessary for such methods to be complemented so that they cover a recent variety of designs, materials, and sewing machines. For consumer products, the main sewing method is to use a curved waist belt and a console zipper in silhouette running across half the hipbone. Second, consumer products employ three different types of cutting and sewing methods for putting an inseam on the center of the back slit part: to leave the whole inseam hemmed in the back center, to cut the left side of the inseam to the upper part of the back slit, and to cut the inseam to both the upper parts of the back slit. However, a method shown in most of the sampled text books is to cut the inseam of the back center to both the upper parts of the back slit. Third, the way of finishing a bottom edge hem in the text books is to do slip-stitch, herringbone stitch, and slinting hemming, in order after doing over-lock stitch, or to cut the hem on the bias and then slip-stitch, while for the consumer products the most frequently used sewing method is to finish the bottom edge hem by doing secoui-stitch. Finally, while in the text books the method of stitching darts and tucks is used for lining, the main lining method used in consumer products is to make tucks only. Also in the way of stitching the side seams of lining or the seams of the back center, there is a difference between the two sample groups of text books and the consumer products: while the former suggests using both open seams and over-lock stitch, the latter is found to finish the seams using an over-lock stitch only.

• 복식
• /
• 제56권8호
• /
• pp.113-122
• /
• 2006

In this study, about forty teaching materials have been analyzed in order to examine tight skirt sewing methodtreated in basic process in a college and a fashion related educational institution. The study objects limited with a belt, back centered zipper, and back double slits on a tight skirt, and used fifteen suitable teaching materials in this study. The first study result appeared that every single teaching material suggested the different way of wick adhesion which is used in zipper slit, back slit, and belt part when the skit has been manufactured in order to do a form of clothes well. Secondly, it is the case of a back slit part used for the purpose of both functionality of action and decoration, and it is the section which varies a sewing and cutting way according to seam room width of a back middle seam. However, the majority of teaching materials appeared by being selecting the way how it had cut an inseam of the back center by the both upper part of back slit. Finally, the result showed that it mentioned mainly only both sided zipper sewing method if it seems to be easy to treat the majority in a basic process even though use of a console zipper Is general on a zipper sowing way recently for several years. Also, two forms are used in the belt manufacturing, and they are based with a waist line. However, the teaching materials that were used in this study presented only a manufacture way of the straight line on the waist belt.