• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.158-158
• /
• 2004

본 연구에서는 이부프로펜(Ibuprofen)분말을 마이크론(Micron) 크기의 입자로 만들기 위하여 극저온 볼 밀링 공정(Cryogenic Ball Milling Process)을 사용하였다. 극저온 볼 밀링 공정은 약 -18$0^{\circ}C$의 질소 분위기에서 6시간 동안 실행되어 졌다 이부프로펜 분말 형상의 변화는 SEM(Scanning Electronic Microscope)촬영을 통하여 관찰하였으며, 분말의 입자 크기와 분포는 입도 분석기(Particle Size Analysis)를 사용하여 극저온 볼 밀링 공정 전ㆍ후의 변화를 관찰하였다(중략)

• Resources Recycling
• /
• v.20 no.6
• /
• pp.37-42
• /
• 2011

Copper chip scrape has been occurred by cutting of copper pipe. The feasibility of copper chip scrape into the copper powder by milling was studied. Two milling type such as rod milling and horizontal balling milling were applied in this research. Copper chip can not fragmented into powder by using rod milling. In contrast to rod milling, copper chip can be changed into powder by horizontal ball milling for above 36 hours. It was found that recycling of copper chip scraps into copper powder by horizontal ball milling is possible and powder fraction percent ($75{\sim}150{\mu}m$) of milled copper chip for 48 hours is 25.3%.

• Korean Journal of Mineralogy and Petrology
• /
• v.36 no.2
• /
• pp.95-106
• /
• 2023

Quartz (SiO₂) is among the major rock-forming minerals in the earth's crust. The atomistic structures of SiO₂ may evolve during diverse frictional processes. The reduction of friction of quartz-rock accompanied by its amorphization, hydration, and formation of silica gel provides mineralogical insights into earthquakes and related phenomena. Ball milling, together with rotary shear experiments have been useful to infer the atomic origins of such processes. In this study, optimal experimental conditions for ball milling for amorphization of SiO₂ were determined by taking into account various process variables. The crystallinity of SiO₂ gradually decreased and became amorphous as the ball milling time increased at a high milling speed. The degree of wear of the milling media and its effect on the amorphization of SiO₂ were analyzed using distinct milling materials (zirconia, stainless steel). The amount of ball wear increased with increasing milling time. Furthermore, the worn stainless steel particles from balls tend to interact with amorphized SiO₂ to form Si-O-Cr. These results aid in understanding the process of atomistic structural changes caused by ball milling of divserse materials with relatively high hardness, such as SiO₂, and understanding various geological friction processes.

• Resources Recycling
• /
• v.9 no.4
• /
• pp.50-55
• /
• 2000

Recycling technology of aluminum foil scraps into aluminum flake powder by ball milling in dry or wet conditions was studied. Aluminum foil were laminated each other, elongated through microforging by the falling balls, fragmented into small foils and then changed into flake powder during ball milling. It is also possible to recycle foil scraps with thickness less than $60\mu\textrm{m}$ into aluminum paste by wet ball milling. As initial foil thickness decreases, foil is easily milled to flake powder by wet milling in mineral spirits. the appearance and the opaque character of glass painted with aluminum paste obtained by wet milling of foils are similar to those of aluminum paste made by ball milling of gas atomized powder.

• Journal of the Microelectronics and Packaging Society
• /
• v.21 no.4
• /
• pp.133-137
• /
• 2014

As a preceding process for preparing several micrometer sized Ag-coated Cu flakes, ball milling of submicrometer-sized Cu particles synthesized through a wet chemical method was performed in order to convert the particles into flakes. To suppress oxidation and aggregation of the particles during ball milling, ethylene glycol and ethyl acetate were used as a medium and a surface modifying agent, respectively. Results obtained with different rotation speeds of a jar indicated that the rotation speed changes a rotating mode, and strikingly alters the final shapes and shape uniformity of Cu particles after milling. The diameter of zirconia ball was also confirmed. Although there was aggregates in the initial submicrometer-sized Cu particles, therefore, well-dispersed Cu flakes with a size of several micrometers were successfully prepared by ball milling through optimization of rotation speed, amount of ethyl acetate, and diameter of zirconia ball.

• Journal of the Korean Ceramic Society
• /
• v.41 no.5
• /
• pp.375-380
• /
• 2004

Pb(Ni$\_$1/3/Nb$\_$2/3/)O$_3$-PbZrO$_3$-PbTiO$_3$ thick films were screen-printed on platinized alumina substrates and fired at 800-1000$^{\circ}C$. Two kinds of powders with different particle size were prepared by attrition and ball milling methods. Effects of particle size of starting material on the microstructure and electrical properties of the thick films were investigated. Average particle size of attrition milled-powder (0.44 ${\mu}$m) was much smaller than that of ball milled-powder (2.87 ${\mu}$m). Average grain size of the thick film prepared from attrition-milled powder was smaller than that of the thick film prepared from ball-milled powder at the sintering temperature of 800$^{\circ}C$. However, the difference in average particle size became smaller with increasing the sintering temperature. Thick films prepared from attrition-milled powders showed more uniform and denser microstructures at all firing temperatures. Thick films prepared from attrition-milled powders had better electrical properties at the firing temperature above 900$^{\circ}C$ than thick films prepared from ball-milled powders. Dielectric constant, remanent polarization and coercive field of the thick film prepared from attrition-milled powders and fired at 900$^{\circ}C$ were 559, 16.3 ${\mu}$C/cm$^2$, and 51.3 kV/cm, respectively.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2001.11a
• /
• pp.46-46
• /
• 2001

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.05a
• /
• pp.48.2-48.2
• /
• 2009

Ti와 Ti-6%Al-4%V합금은 내 부식성 및 생체 적합성이 매우 우수하기 때문에 현재 생체재료로써 널리 사용되고 있다. 하지만 Ti-6%Al-4V합금에 포함된 Al과 V이 신체에 좋지 않은 영향을 줄 수 있다는 연구 결과가 보고되면서 새로운 생체재료의 연구가 활발히 진행되고 있다. 본 연구에서는 생체에 무해한 Ti-Nb와 hydroxyapatite(HAp)를 복합 첨가하여 고에너지볼밀링(high-energy mechanical milling, HEMM)으로 나노 합금분말을 제조 후 급속소결에 의하여 Ti-Nb/HAp 생체재료를 제조 하였다. 제조한 Ti-Nb/HAp 생체용 복합재료에서 HAp 첨가량과 분말의 밀링, 믹싱에 따른 조직 변화와 소결체의 생체적합성의 변화 및 기계적 특성의 변화를 분석하였다. 이때 Ti-42%Nb에 HAp의 첨가량을 0%, 5%, 10%, 15%로 변화를 주었고, 밀링은 고에너지볼밀링기를 이용하여 0~8시간 동안 실시하였다. 그 결과 밀링 시간이 증가할수록 합금 분말의 크기가 미세해졌으며, 특히 8시간 밀링시 분말의 크기가 나노 크기로 감소하여 기계적 특성(경도 및 강도)이 우수해지는 것을 알 수 있었다.

• Transactions of the Korean hydrogen and new energy society
• /
• v.14 no.4
• /
• pp.313-320
• /
• 2003

볼밀링법을 이용하여 타이타늄 스펀지와 칩 또는 스크랩으로부터 상온애서 직접 타이타늄 수소와 분말을 재조하는 실험을 행하였다. 실험결과 진공중에서 볼링을 행한 타이타늄 스펀지와 칩의 경우 24시간외 후 합금분말의 크기는 약 20 um 정도의 크기를 갖는 것을 확인하였다. 그러나 수소화 분위기에서 볼밀링을 행한 경우에 12시간 후 수소화분말의 입도는 0.1-0.2 um로 극히 미세한 합금 분말이 제조되었다. 수소분위기에서의 볼밀링에 의한 타이타늄 분말제조는 기존의 방법에 비해 열을 가하지 않고 타이타늄 수소화분말을 얻을 수 있다는 장점과 나노크기의 미세한 수소화 분말을 얻을 수 있음을 알 수 있었다.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2005.11a
• /
• pp.84-85
• /
• 2005