• Culinary science and hospitality research
• /
• v.16 no.1
• /
• pp.226-238
• /
• 2010

This study investigates the recovery of trust and provision of a contract between a franchiser and a franchisee in the food service industry. It has come to the following results after analyzing the inter-affections among the franchisers' conditions, the trust level of their support and their intention to contract. First, such factors as experience, confidence, and expertise of a franchisee have significant effects on the terms of a franchiser. Second, ad support, experience, expertise, confidence, and capital factors have significant effects. Third, such factors as history of a franchiser, the number of its franchisees, its brand have significantly influence on trust. Fourth, educational support, utilization of job instruction and purchasing of packages have significant effects on intention to contract.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.12 no.5
• /
• pp.15-25
• /
• 2002

In this paper a design of high performance cryptographic processor which implements AES Rijndael algorithm is described. To eliminate performance degradation due to round-key computation delay of conventional processor, the on-the-fly precomputation of round key based on modified round structure is adopted. And on-the-fly round key generator which supports 128, 192, and 256-bit key has modular structure. The designed processor has iterative structure which uses 1 clock cycle per round and supports three operation modes, such as ECB, CBC, and CTR mode which is a candidate for new AES modes of operation. The cryptographic processor designed in Verilog-HDL and synthesized using 0.251$\mu\textrm{m}$ CMOS cell library consists of about 51,000 gates. Simulation results show that the critical path delay is about 7.5ns and it can operate up to 125Mhz clock frequency at 2.5V supply. Its peak performance is about 1.45Gbps encryption or decryption rate under 128-bit key ECB mode.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.6D
• /
• pp.727-736
• /
• 2009

Many of the researchers have tried to enhance the satisfaction of both users and owners of social infrastructures by applying the asset management methodology. This study is to develop more efficient asset management framework for bridge management. Based on various literature review, an asset management procedure for bridge management was suggested, and appropriate practices at each step were given. The suggested procedures include the determination of operation and maintenance strategy, level of service, performance measure, valuation of assets, and decision-makings. In addition, this study suggests an applicable decision-making process for the resource distribution based on the management strategy.

• Journal of Soil and Groundwater Environment
• /
• v.24 no.1
• /
• pp.1-9
• /
• 2019

This study presents a technical perspective to the fate characteristics of phenol and m-cresol, which represent some of the most common organic chemicals found in chemical spill accidents, and likely to persist in soil and groundwater due to their highly stable physicochemical properties. Some cases of domestic and foreign chemical accidents linked to phenol and m-cresol contamination were compiled. Due to their low organic carbon-water partitioning coefficient (Koc), phenol and m-cresol tend to migrate into groundwater and remained as dissolved phase. On the other hands, phenol and m-cresol can be readily decomposed by microbes in soil and groundwater under appropriate conditions. Therefore, the fate characteristics of these chemicals are highly contingent on environmental conditions. Thus, if a great quantity of leakage is occurred by chemical accidents, the up-to-date and correct information about fate characteristics taking into account both the chemical and environmental conditions is greatly needed to minimized the potential hazards from these chemicals.

• Proceedings of the KIPE Conference
• /
• 2018.11a
• /
• pp.86-88
• /
• 2018

The three level(3L) neutral point clamped (NPC) voltage source converter (VSC) topology is widely used for grid interface in high power wind energy due to its superior performance as compared to the two level(2L) VS. However, one of the major drawbacks of this topology is the unequal dispersion of loss and therefore the junction temperature among the power devices. The 3L ANPC topology derived from the NPC topology was proposed to resolve this drawback of unequal loss profile of 3L NPC. The 3L ANPC can work under various switching strategies. In this paper a comparative study of the various switching strategies of 3L ANPC using the recently developed 10kV IGCTs which has the capability to raise the current and voltage rating of the wind turbines is carried out. The comparison is performed using ABB make 10kV IGCT 5SHY17L9000 and PLECs simulations.

• Transactions of Materials Processing
• /
• v.31 no.4
• /
• pp.186-193
• /
• 2022

The application of UHSS sheet is being expanded up to 50% to reduce the weight of automobiles and improve safety. However, due to the high strength and low elongation of the ultra-high tensile strength steel sheet, product defects such as spring back and mold defects such as cracks and chippings also occur. In this study, Pin/Ring on Disc and Spiral wear tests were conducted to evaluate the durability of Ti/Cr-coated molds for forming 1.2GPa grade UHSS sheets. Component analysis and thickness were measured for each coating layer, and hardness and adhesion were investigated to determine mechanical properties. Combining the results of various wear tests, it was found that the TiAlN coating had the best wear and sticking resistance.

• Progress in Superconductivity and Cryogenics
• /
• v.11 no.3
• /
• pp.55-59
• /
• 2009

In attempts to closely study the effect of high efficiency, friendly environment HTS(High Temperature Superconducting) cable and SFCL(Superconducting Fault Current Limiters) on power system, several projects were carried out around the world. Promising results have been achieved in terms of cable capacity and reliability. commercial HTS cable and SFCL, however, must not only be only be feasible, but meet practical requirements as well. To facilitate the transition of HTS cable technology from the Lab. to the Real Grid, a New project for applying 22.9kV HTS cables and SFCL to the commercial Power Grid supported by Government has just started in KEPCO. Target of this project is to operate two 22.9kV, 50MVA, 150MVA HTS cables and two 22.9kV 630A, 3000A SFCL in a KEPCO Grid in order to demonstrate its reliability and stable operation. This paper will present the technology for selecting appropriate site and its plan for installation & operating of 22.9kV HTS cables & SFCL in KEPCO Grid.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.342-342
• /
• 2020

최근 소형 무인비행장치(UAV; unmaned aerial vehicle)인 드론을 이용한 신산업 육성 및 지원에 관한 관심도가 높아지고 있다. 국외에서는 이미 드론을 이용한 농업관리와 물류배송, 공공부문 모니터링 등 다양한 산업 분야의 드론 이용을 적극 장려하고 있다. 드론 이용에 관한 관심도가 높아짐에 따라 국내외적으로 드론 응용 관련 기술 개발과 연구가 활발하게 진행되고 있지만, 국내에서는 환경모니터링과 시설물 점검 등 일부 제한적으로 활용되고 있다. 국내에서는 2024년까지 드론 응용서비스로 확장되는 산업 변화에 대응, DNA(Data, Network, AI) 기술을 접목한 새로운 개방형 플랫폼 구축을 목표로 기술개발 및 산업 육성을 촉진하고 있다. 이러한 국내 기술 개발 방향에 맞추어 드론과 첨단기술을 이용한 하천조사와 관련해 드론을 연계한 하천관리 플랫폼 개발의 필요성이 높아지고 있다. 본 연구에서는 드론 기반 하천조사 및 모니터링 수행을 위한 하천관리 운영플랫폼 개발을 목표로 국내외 요소기술을 분석하고 기술수준을 조사했다. 특히, 드론 기반 하천관리에 필요한 임무를 영역별로 분리해 요소기술 기반의 플랫폼 서비스를 정의하고 하천관리 부문 개방형 플랫폼 구축을 위한 시스템 구성 및 운영에 필요한 요소기술을 선정했다. 최종적으로 선정된 플랫폼 서비스와 요소기술을 기초로 시스템 적용방안을 검토하고 하천관리 운영플랫폼 구축을 위한 시스템 아키텍처를 정의 및 설계했다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2021.11a
• /
• pp.5-7
• /
• 2021

최근 해양사고 발생 건수의 급격한 증가와 더불어 어선의 조업 중 안전사고로 인한 인명피해 또한 크게 증가하였다. 중앙해양안전심판원의 공식 통계에 따르면, 2017년 46명이었던 안전사고의 사망실종자는 2019년 38명으로 소폭 감소하였으나, 2020년 60명으로 크게 증가하였다. 그러나, 사망자가 감소하였던 2019년 안전사고로 인한 부상자는 164명으로 전년도 76명 대비 2배 이상 증가하며 어선원에 대한 안전재해 예방은 실효성을 갖지 못하는 실정이다. 국내 업종별 산업재해율을 비교해볼 때, 어업 재해율은 농업, 광업, 제조업, 건설업, 임업 등을 포괄한 전체 산업 평균 재해율의 약 10배에 이르며 어업인들의 안전이 큰 위협에 놓여있음을 시사한다. 본 연구에서는 2017년부터 2019년의 수협중앙회의 어선원 공제보험데이터를 활용하여 선박별, 재해자별 사고 현황과 발생 형태를 분석하였다. 특히, 교차분석과 연관규칙분석기법을 통해 승선 직책별 부상 부위와 사고발생 형태를 식별하였으며, 이에 따라 직책에 따른 부상 부위를 비교하여 맞춤형 예방대책 수립을 위한 지원과, 사고발생형태의 군집 분석을 통해 발생형태간의 연결고리를 도출하여, 스위스 치즈 모델에서 제안하는 취약점(Weakness)를 식별하고, 이러한 취약점을 보완하기 위한 방어 장벽(Protective barriers)을 제언한다.

• Journal of KIBIM
• /
• v.8 no.4
• /
• pp.49-59
• /
• 2018

Recently, the application of BIM for port & harbour facilities has been increasing, as it is widely applied to the infrastructure field both at domestic and abroad. However, the port and harbour projects still have very poor facilities information management system and the application level of BIM is very low compared to other facilities. Even if BIM is applied for those project, it is very difficult to determine in advance what information is needed without an accurate understanding of the business process. The purpose of this study is to develop a BIM framework for port & harbour facilities and to examine its applicability. To do this, we structured the classification of the port & harbour facilities and constructed object-based classification system based on ISO12006-3 standard. We also derived the BIM framework requirements from the viewpoint of process, standard, interface, and information, and confirmed the linkage of the BIM object classification system in the framework item. The applicability of the BIM framework for inspection process cases of port & harbour was examined. Accordingly, this study can solve requirement setting method, which is the non - procedural and non - systematic project information, in the BIM application process of the port & harbour project with the BIM framework. In addition, the framework is expected to be integrated into the system to play a key role in the selection of project objectives, and the ability to clearly identify the information requirements required by the BIM manager to perform the project.