• Composites Research
• /
• v.12 no.3
• /
• pp.84-90
• /
• 1999

High alumina cement(HAC) and polyvinyl alcohol(PVA) based macro-defect-free(MDF) cement composites were reinforced using short carbon fibers, 3mm in length, 1-4% in weight fraction and insoluble polymers such as polyurethane, epoxy, phenol resin, in order to increase mechanical properties and water stability. The specimens were manufactured by the low heat-press(warmpress) method. In addition, the interface and the cross-linking reaction of cement and polymers was also studied by the SEM and TEM. Flexural strength of HAC/PVA based MDF cementitious composites was proportionally decreased with increasing fiber contents due to the undensified structure around fibers. The flexural strength of insoluble polymer added specimen was decreased with increasing fiber contents, while water stability was dramatically improved. Epoxy resin added specimen showed the highest strength with increasing fiber contents, compared with other specimens. The water stability of fiber content 4% added specimen immersed in water presented about 95%, 87% at 3 and 7 days immersed in water, respectively. The interfacial adhesive strength of fiber-matrix was very much improved due to cross linking reaction of polymer and metal ions of cement. Tensile strength of insoluble polymers added composites as linearly increased with increasing the fiber contents. The epoxy resin added specimen also showed highest tensile strength. The 4% fiber added specimen presented 30~80% higher strength than controlled specimen.

• Journal of Platform Technology
• /
• v.6 no.4
• /
• pp.59-68
• /
• 2018

The objective of this study is to develop an embedded antenna structure with NFC and WPC composite functions. By selecting stable materials, the optimal component ratio of the polymer sheet was determined. The low cost embedded winding method compared to the existing FPCB was devised. During the winding process, characterization and process technology were developed. We also fabricated a ferrite mold to process the WPC grooves and developed the process technology for optimizing the WPC antenna. The following conclusions were obtained. (1) Optimum composition ratio was derived as Fe 87.5%, Si 7%, Al 5.5% and selected as the final material. (2) Optimal sheet conditions were derived from the experimental evaluation method and the experimental design method through the combination test of the optimized sheet and the conventional mass production FPCB. (3) According to coil diameter and inner diameter, Q value fluctuation, resistance value and efficiency fluctuation are obtained. Therefore, the most suitable coil condition is selected and Rx matching is performed. (4) The EMV load modulation test and the cognitive distance test of the polymer sheet and the ferrite sheet showed that the recognition distance of the polymer sheet at 1k and 4K was 32-33 mm and the recognition distance of the ferrite sheet at the same condition was 30-31 mm.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.165.1-165.1
• /
• 2016

표면활성화 접합은 이종 소재의 표면을 제어하여 직접 접합하는 기술이다. 본 연구에서는 표면활성화 접합을 이용하여 고 방열특성의 LED용 히트스프레더(heat spreader)를 제작하기 위하여 $Al-Al_2O_3$ 복합소재를 제조하였다. LED 제품의 히트스프레더는 LED에서 발생하는 열을 한 곳으로 집중하는 것을 막아 열을 분산하는 금속판을 의미한다. 최근의 LED 제품은 고출력화에 의한 발열량의 급증으로 MCL(Metal Clad Laminate)를 이용하여 LED 칩에서 발생된 열을 외부로 배출하는 모듈구조를 나타내는 경우가 대다수이다. LED에서 열이 증가하게 되면 LED의 효율이 감소하고, 수명이 줄어드는 현상을 보이기 때문에 방열특성은 매우 중요하다. 따라서 고출력화되어 LED 칩에서 발생되는 열을 제어하는 기술이 이슈화 되고 있다. 기존의 히트스프레더 구조는 통상적으로 Al/절연층(폴리머)/Al으로 폴리머의 열전도율이 1W/mk로 고출력화에 의해 급증하는 LED의 발열량을 충분히 해소시키기 어렵다. 본 연구에서는 급증하는 LED의 방열량을 해소시키기 위해서 기존의 Al/폴리머/Al의 구조를 $Al/Al_2O_3/Al$의 구조로 개발하기 위해서 HV-SCDB 기술을 이용한 $Al-Al_2O_3$ 복합소재 제조 및 접합특성에 관하여 연구하였다.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1045-1046
• /
• 2011

본 논문에서는 굴곡면 커버내에 전기회로를 구현시 그 동안 포토리소그라피 공정으로 제작된 PCB를 휴대기 등 내부 케이스에 부착하여 전기회로를 구현하였으나 본 논문에서는 PCB없이 직접 케이스인 복합 폴리머소재에 레이저조사에 의해 패턴과 무전해도금으로 전기회로를 직접구현하는 기술이다. 이러한 방법은 제안한 3단계 공정기법에 의해 가능하며, 즉 사출형 복합폴리머소재제작, 소재의 레이저조사에 의한 시드패턴 구현 및 형성시드의 무전해도금에 의한 전도성패턴구현 공정을 통하여 곡면커버의 전기회로구현이 가능하다. 이에 따라 기존의 복잡한 10 단계 이상의 포토리소그라피 공정을 레이저조사에 의한 3단계 공정으로 간소화함으로서 제품의 생산성향상, 다량장비 구입절감, 작업공간축소 및 기타 소재절감 등의 경제적 효과를 얻을 수 있다. 응용분야는 2차원 평면 전기회로 외에 3차원 곡면형상의 제품인 자동차, 휴대폰, 의료기, 센서, 오토바이 등의 커버에 직접회로 응용이 가능하다. 이에 대한 타당성은 실험결과를 통하여 입증하였다.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.19 no.1
• /
• pp.140-144
• /
• 2010

In recent years there has been a growing interest for the use of natural fibers in composite applications due to their low cost, environmental friendliness, and good mechanical properties. The purpose of this study is to determine the characteristic of bending strength on bamboo fiber reinforced polymer composites. The parameters of RTM process depend on the weight ratio of bamboo fiber and resin, the number of bamboo ply and amount of hardening agent. Besides the existence of pore in composites according to vacuum time investigated a effect on mechanical properties of reinforced polymer composites. Test result shows that compressive strength was a maximum(approximately 1,840kgf/$cm^2$) value when weight ratio of resin was 12%.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.05a
• /
• pp.124-125
• /
• 2014

Polymer concrete has more excellent durability, tensile strength, flexural strength and waterproof performance mechanically than normal concrete, and as it mixes as a polymer binding material, it can reduce the cement use amount. This study reviews fundamental properties of cement material mixed with complex polymer. As a result of this study, as percentage of complex polymer mix increases, flow value will decrease so that liquidity and compression strength will decrease. On the other hand, in case of flexural strength, when the mixture is 10%, it increases significantly more than OPC.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.793-796
• /
• 2003

This study dealt with the manufacturing process of self-healing microcapsules for damage repair in polymeric composites. The microcapsule was consisted with a DCPD (dicyclopentadiene) as the healing agent and a urea-formaldehyde resin as the wall section. The size distribution of microcapsules were measured by a particle size analyzer using a laser diffraction technique. Thermal stability of microcapsules was investigated by using a TGA under continuous and isothermal heating conditions. According to the results, these microcapsules were verified to be to thermally stable and have a great potential to be applicable for damage repair in polymeric composites.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2004.10a
• /
• pp.9-14
• /
• 2004

An approximate relationship of the strain and applied potential was derived for SWNTs and conductive polymer composite actuator. During the deriving process, we used an electrochemical system to model the electromechanical actuation of the composite film. This relationship can give us a direct understanding to the actuation of a nanoactuator

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2008.11a
• /
• pp.71-72
• /
• 2008

Ultralow-k 물질은 반도체 성능향상에 있어서 필요한 물질이다 [1]. 이를 위하여 본 실험은 톨루엔과 일반적인 SiO 박막을 제조하는 데 사용되어 지는 TEOS (tetraethyl orthosilicate)를 co-depo.하여 유무기 복합 박막을 PECVD (plasma enhanced chemical vapor deposition)법을 이용하여 증착하였다. 얻어진 박막은 IR과 nano-indentation과 capacitance의 측정을 통하여 측정되었다. 이를 통하여 co-depo.를 통한 유무기 복합 박막이 기존의 CVD법을 이용한 저유전 박막보다 우수한 기계적 특성을 가짐을 확인하였다.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2005.11a
• /
• pp.432-434
• /
• 2005