• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.4
• /
• pp.425-432
• /
• 2021

In this paper, We produced supporting for ginseng cultivation facilities as a material recycling product of CPW(Complex Plastic Wastes, CPW) from households. And we analyzed the characteristics of material recycling products according to the amount of r-LDPE(Recycled low density polyethylene, r-LDPE) used. As a result, as the amount of recycled LDPE used increa sed, the tensile strength a nd elonga tion of ma teria l recycled products using CPW increa sed, but a sh decrea sed. When the recycled r-LDPE usage is 5% or more, the physical properties of the material recycling product using CPW stably satisfy the quality standard (GRM 3093-2021) of supporting for ginseng cultivation facilities.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.3
• /
• pp.253-259
• /
• 2021

Plastic wastes generated from household waste are separated by mixed discharge with foreign substances, and recycling is relatively low. In this study, the effect of the ratio and content of mixed plastic waste coarse aggregate(MPWCA)s and mixed plastic waste fine aggregate(MPWFA)s filled with blast furnace slag fine powder on the slump and compressive strength of concrete was evaluated experimentally. The MPWCAs were found to have a similar fineness modulus, but have a single particle size distribution with a smaller particle size compared to coarse aggregates. However, the MPWFAs were found to have a single particle size distribution with a larger fineness modulus and particle size compared to fine aggregates. Meanwhile, the effect of improving the density and filling pores by the blast furnace slag fine power was found to be greater in the MPWFA compared to the MPWCA. As the amount of the mixed plastic waste aggregate(MPWA)s increased, the slump and compressive strength of concrete decreased. In particular, the lower the slump and compressive strength of concrete was found to decrease the greater the amount of MPWFA than MPWCA when the amount of MPWA was the same. This is because of the entrapped air and voids formed under the angular- and ROD-shaped aggregates among the MPWFAs. On the other hand, the addition of the admixture and the increase in the unit amount of cement were found to be effective in improving the compressive strength of the concrete with MPWAs.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.8 no.4
• /
• pp.436-443
• /
• 2020

In this paper, we tried to examine the composition ratio of plastic waste from households according to the generated city and the qualities according to the production time of material recycling products. As a result, the composition ratio of recyclable plastic waste among the total plastic waste according to the generated cities is 64.5~90.4%, showing a big difference by city. In addition, the quality evaluation of material recycling products by production time for four months showed that the average tensile strength was 12.33MPa, the average elongation rate was 5.94%, the average density was 1.35g/㎤ and the average ash content was 3.66%.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.218-218
• /
• 2021

최근 환경 문제과 관련하여 건설 분야에서 발생하는 환경적인 부담을 줄이고자 다양한 재활용 소재들에 대한 연구에 대한 관심이 증가하고 있다. 특히 폐기물 중 생활계에서 발생하는 폐플라스틱은 '쓰레기 대란'이라는 사회적 문제로 대두된 사례가 있다. 생활계에서 발생하는 폐비닐은 다양한 조성으로 이루어져 재활용 대상에서 제외되기 때문에 매립 또는 소각되는 플라스틱의 양을 줄이고 재활용율을 늘릴 수 있는 연구가 필요하다. 본 연구는 생활계에서 발생하는 폐비닐을 융용시켜 무기첨가제 등을 한 복합 Alloy를 생산한다. 또한 재생이 가능한 복합 Alloy를 압출 또는 사출 과정을 통해 테트라포드의 형태를 만들 수 있는 Preform으로 가공하는 공정연구 하였으며 이러한 Preform을 해안 및 항만에서 사용되는 콘크리트 피복재에 적용하였을 때 플라스틱 소재와 콘크리트 소재의 비중의 차이로 인해 발생하는 안정성을 정량적으로 평가하는 수리모형 실험를 수행하였다.