• Membrane Journal
• /
• v.22 no.5
• /
• pp.342-351
• /
• 2012

In this study, PTMSP[poly(1-trimethylsilyl-1-propyne)]/PDMS[poly(dimethylsioxane)]-NaY zeolite and PTMSP/PDMS-NaA zeolite composite membranes were made to incorporate zeolite into PTMSP/PDMS graft copolymer in order to improve the selectivity and thermal stability, the drop of permeability by physical aging effect during long period of time for the PTMSP membrane. To investigate the physico-chemical characteristics of composite membranes, the analytical methods such as FT-IR, $^1H$-NMR, TGA, SEM, and GPC have been utilized. The gas permeability and selectivity properties of $H_2$ and $N_2$ were evaluated. The permeability of the PTMSP/PDMS-NaY zeolite and PTMSP/PDMS-NaA zeolite composite membranes than PTMSP/PDMS graft copolymer membrane increased, increased as zeolite content increased. On the contrary, the selectivity ($H_2/N_2$) of the composite membranes decreased as zeolite content increased. PTMSP/PDMS-NaA zeolite composite membrane showed better permeability and separation factor than PTMSP/PDMS-NaY zeolite composite membrane.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1995.10a
• /
• pp.36-37
• /
• 1995

투과증발법은 기존의 증류법에 의해 분리되기 어려운 혼합물(공비혼합물이나 끓는점이 비슷한 혼합물)이외에 열에 민감한 생성물의 분리, 과익쥬스의 농축, 불순물 찌꺼기의 제거, 정량 검출을 위한 유기 오염물질의 농축 등에 이용되었으며 특히 물과 에탄올의 공비혼합물의 분리와 물로부터 희박 유기물질을 회수하는데 행해져 왔다. 본 연구에서 사용된 키토산은 친수성기들을 가지고 있기 때문에 물과 알코올의 분리에서 물을 선택적으로 투과시켜 효과적인 투과증발막으로 사용될 수 있으며 투과속도를 높이기 위해서 활성층이 매우 얇은 복합막을 제조하였다. 또한 키토산 복합막을 다양한 가교제 (glutaraldehyde, glyoxal, terephthalaldehyde, 황산등)로 가교한 막들을 열처리를 하거나 키토산과 PVA를 블렌드하여 제조한 키토산/PVA 블렌드 복합막을 이용하여 에탄올/물, IPA/물 혼합용액에서의 탈수 실험을 실시하여 이에 따른 투과성능의 영향을 살펴보았다.

• Membrane Journal
• /
• v.16 no.2
• /
• pp.123-132
• /
• 2006

The PTMSP-silica-PEI composite membranes were synthesized from tetraethoxysilane (TEOS) and poly (1-trimethylsilyl-1-propyne) (PTMSP) by sol-gel process. The PTMSP-silica nanocomposite membranes were characterized by $^1H-NMR$, FT-IR, TGA, XPS, SEM, GPC and gas permeation measurements were accomplished with $H_2,\;O_2,\;N_2,\;CO_2,\;CH_4$. The gases permeability increased with increasing TEOS content. Both the permeability and selectivity of $H_2,\;CH_4$ increased to 15 wt% TEOS. While the permeability of $O_2,\;CO_2$ increased without decrease of selectivity.

• Membrane Journal
• /
• v.6 no.4
• /
• pp.250-257
• /
• 1996

Surface crosslinked chitosan composite membranes were prepared with glutaraldehyde and surfuric acid. Effects of neutralization for complex between chitosan and acetic acid and of water permeability for substrate membranes on pervaporation performance were investigated. For ionically crosskinked membranes, effect of active layer thickness on separation factor of water/ethanol mixture was studied. With increasing the water permeability of the substrate, the membrane showed an increased separation factor, while it maintained a constant permeate flux. Neutralized chitosan composite membranes revealed a decreased separation factor and a constant permeate flux. When the thickness of the active layer increased, an optimum crosslinking time to achieve higher separation factor shifted to a prolonged times.

• Membrane Journal
• /
• v.6 no.1
• /
• pp.37-43
• /
• 1996

Chitosan composite membranes were prepared by casting chitosan solution onto porous polysulfone ultrafiltration membrane. Composite membranes to separate water from aq. ethanol solution were chemically crosslinked by using various crosslinking agent, glyoxal, terephthalaldehyde and glutaraldehyde. The morphology of surface crosslinked chitosan composite membranes were examined by scanning electron microscopy. ATR-FTIR was employed to confirm the crosslinking mechanism of surface crosslinked chitosan composite membranes. In the case of glutaraldehyde, optimum separation factor and decreasing trend of flux were shown.

• Membrane Journal
• /
• v.16 no.4
• /
• pp.303-312
• /
• 2006

The asymmetric hybrid membranes of polyethersulfone (PES) and $ZrO_2$ nanoparticles were prepared via new one-step procedure combining simultaneously the phase-inversion method and the sol-gel technique. The optimum contents of $Zr(PrO)_4\;and\;HNO_3$ catalyst were determined by the adsorption experiments of phosphate anion onto the resulting hybrid membranes. The maximum adsorption of phosphate anion is obtained at the conditions of 0.15 mL $Zr(PrO)_4$ addition per 1 mL PES and 30 mL $HNO_3$ addition per 1 mL $Zr(PrO)_4$. Variation of morphology, performance and incorporated $ZrO_2$ amount of the resulting hybrid membranes were discussed and determined using SEM, pure water flux, TGA, ICP, XRD and contact angle measurements. Increasing $Zr(PrO)_4$ addition into casting solution, pure water flux is increased and $ZrO_2$ amount in the hybrid membrane is maximized at the conditions 0.15 mL $Zr(PrO)_4$ addition per 1 mL PES. The prephosphatation of PES-$ZrO_2$ hybrid membrane was studied to modify the surface characteristics of membrane. Ultrafiltration of bovine serum albumin (BSA) solution was performed in a dead-end cell using both a bare (non-phosphated) and a phosphated hybrid membrane. It is revealed that both the permeate flux and BSA rejection were increased as about 40% by prephosphatation of hybrid membrane. These results may be explained on the basis of the increase of membrane hydrophilicity, which was determined from contact angle measurements.

• Applied Chemistry for Engineering
• /
• v.29 no.1
• /
• pp.67-76
• /
• 2018

In this study, PDMS-HNT and PDMS-mHNT composite membranes were prepared by the addition of halloysite nanotube (HNT) and modified HNT (mHNT) to PDMS. To investigate the physico-chemical characteristics of composite membranes, analytical methods such as FT-IR, XRD, TGA, and SEM were utilized. The gas permeability and selectivity properties of $N_2$ and $CO_2$ were evaluated. In particular, the PDMS-HNT with 10 wt% HNT and PDMS-mHNT with 5 wt% mHNT showed the highest $CO_2/N_2$ selectivity and $CO_2$ permeability at $35^{\circ}C$, respectively. Overall, PDMS-HNT and PDMS-mHNT composite membranes improved the $CO_2/N_2$ selectivity compared to that of using PDMS membrane.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.1
• /
• pp.433-440
• /
• 2016

Composite membranes were prepared by the solution casting method from sulfonated poly(etheretherketone)(sPEEK) and imidazole and phosphotungstic acid(PWA) to enhance the electrolytic properties of the membrane. TGA measurements showed that physical crosslinking due to acid-base interactions improved the thermal resistance to the desulfonation of sulfonic acid groups of the composite membrane and the addition of PWA enhanced the resistance to thermal decomposition of the composite membrane. The acid-base interaction decreased the water uptake, proton conductivity and methanol permeability of the sPEEK/imidazole composite membranes. The addition of PWA increased the proton conductivities while it decreased the water uptake and methanol permeability of sPEEK/imidazole/PWA composite membranes. Therefore, the selectivity of the composite membranes was enhanced by the addition of PWA.

• Membrane Journal
• /
• v.25 no.6
• /
• pp.538-546
• /
• 2015

In this study, composite membrane is prepared by Layer-by-Layer method using hydrophobic polymer as a coating material on the polysulfone support. The existence of coating layer on the surface and cross section was confirmed by the scanning electronic microscopy. The flux and rejection of the resulting membranes were characterized using 100 ppm NaCl feed solution. PVSA, PEI, PAA, PSSA, PSSA_MA were used as a coating polymer in this study. The composite membrane prepared by using 8,000 ppm PAA solution (Ion strength = 0.35, Coating time = 3 min) and 10,000 ppm PEI solution (Coating time = 4 min). As a result, PAA-PEI composite membrane showed flux of 101 LMH and salt rejection of 66.7%. The composite membrane showed the comparable performance as good as NE 4040-70 (Flux = 30 LMH, Rejection = 40~70%) model produced by Toray Chemical co.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1994.10a
• /
• pp.30-31
• /
• 1994

분리막을 이용한 분리기술은 일반증류법에 의한 분리 또는 정제에 어려운 액체 혼합물을 분리하는데 적용될 수 있고 또한 미래 산업적인 중요성 때문에 최근 유용한 정제법으로 주목을 끌고 있다. 한편, 투과증발법에 의한 액체혼합물의 분리는 공정자체는 매우 간단하면서도 분리막의 투과성능에 따라 분리효율이 달라지기 때문에 이에 적합한 고분자 분리막의 개발은 아직도 많은 연구과제로 남아있는 상태이다. 따라서 본 연구에서는 증류법이나 기타방법에 의하여 회수된 저 농도의 유기수 용액으로부터 물을 보다 효율적으로 분리하여 고농도의 특정순수 유기용제를 얻으려는데 목적을 두고 보다 높은 물 선택성과 투과율을 갖는 새로운 복합막을 개발하기 위해 고흡수성 고분자재료인 CMC와 PVA 그리고 PAA를 소재로 하여 목적하는 분리기능을 갖는 새로운 복합막을 제조하여 실용가능성을 검토하기 위하여 투과증발 분리실험을 하였다.