• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.2
• /
• pp.280-289
• /
• 2004

Adequate polymerization is a crucial factor in obtaining optimal physical properties and clinical performance of resin composite restorative materials. The purpose of this study was to determine the effectiveness of shade and depth on dental composite resin polymerized with plasma arc curing unit employing FTIR and microhardness. From this experiment, the following results were obtained : 1. The light transmission and microhardness by mode 6 in plasma arc curing were similar to by 20 secs in halogen light curing. 2. The experimental groups of A1, A2, A3, A3.5 were not signifcant difference to light transmission and microhardness on surface and 2mm depth, but were significant difference on 3mm and 4mm depth. Especially light transmission and microhardness were small in darker shade and deeper thickness. 3. Compared with depth cure, uncured monomer amount increased at more than 2mm depth. 4. The light transmission by FTIR and polymerization by microhardness were significant corelation.

• Elastomers and Composites
• /
• v.46 no.3
• /
• pp.186-194
• /
• 2011

Natural fiber/natural rubber composites were fabricated by uniformly compounding natural rubber and cellulose- based natural fiber kenaf and then by compression molding. The effect of kenaf fiber content on their vulcanization behavior, hardness, tensile properties, tear strength and static and dynamic properties was investigated. The contents of kenaf fiber in the composites were 0, 5, 10, 15, and 20 phr, compared to natural rubber and additives. The result indicated that various properties of natural rubber depended on the kenaf fiber content. With increasing kenaf fiber content, the torque for vulcanization of natural rubber was increased whereas the vulcanization time was reduced as well. The hardness, tensile modulus and tear strength of kenaf/natural rubber composites were gradually decreased with the fiber content whereas the tensile strength and elongation at break were decreased. Also, with increasing the kenaf fiber content the dynamic property of natural rubber was changed more greatly than the static property. The loss factor, which is closely related with the damping or absorption of the energy given to natural rubber, was proportionally increased with the fiber content.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.2 no.1
• /
• pp.67-77
• /
• 1998

Homogeneous liquids of Ni-21.5Nb-2.5Al and Ni-23.3Nb eutectic superalloys were solidified into Ni/$Ni_3$Al-$Ni_3$Nb(${\gamma}$/${\gamma}$'-${\delta}$)and Ni-Ni/$Ni_3$Nb(${\gamma}$-${\delta}$) phase by directional solidification and the effect of interlamellar spacing on microsturctural stability at high temperatures, hardness variation with growth rate was studied. The interlamellar spacing(${\lambda}$) in the eutectics was varied with the growth rate(R), corresponding to "${\lambda}^2$R ＝Constant" relationship. Isothermal heat treatments of the eutectics used in this study, provided the microstructural stability improvement at hight temperature as the interlamellar spacing increases. It was also seen that the hardness improvement is made with the growth raterowth rate

• Journal of the Korean Vacuum Society
• /
• v.12 no.3
• /
• pp.193-199
• /
• 2003

Ti-Cu-N and Ti-Ag-N nanocomposite films with various copper and silver contents were synthesized by arc ion plating and magnetron sputtering hybrid system. The structure and mechanical properties of these films were found to be dependant on the copper and silver concentration. The maximum hardness of Ti-Cu-N and Ti-Ag-N films showed approximately 40 ㎬ below 2 at%Me. The role of soft metallic phase in Ti-Me-N nanosturctured films containing one hard and one soft phase is also discussed.

• Proceedings of the KIPE Conference
• /
• 2008.06a
• /
• pp.621-623
• /
• 2008

태양광/풍력복합발전시스템은 친환경에너지원의 대표적인 복합발전시스템이다. 본 논문에서는 복합발전시스템을 하나의 DC링크에서 안정적으로 연결하기 위해 슈퍼캐패시터를 도입하여 발전된 전력의 배터리 충전매체로 활용하여 시스템의 안정성으로 높이고 충방전효율을 증가시키고자 하였다.

• Proceedings of the Korean Fiber Society Conference
• /
• 2001.10a
• /
• pp.139-142
• /
• 2001

섬유강화 복합재료는 상대적으로 아주 높은 질량 대비 탄성계수를 가지고 있으므로 경량화 할 필요가 있는 물체나 관성력이 최소로 요구되는 부분에 사용되고 있다. 대부분의 복합재료판들은 고탄성-저신도 섬유를 사용하여 만든 단층의 복합재료를 그배향 방향을 조절하여 원하는 방향 특성으로 접근한다. 그러나 다층으로 만들어 2차원의 등방성 소재로 만들어 사용하고 있다. 그러나 이러한 경우에는 여러 층을 결합 하여야 하는 번거로움과 두께의 제약 등이 있다. (중략)

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.35-35
• /
• 2018

물리적 증착법에 의해 제조되는 초고경도 박막은 나노다층과 나노복합 구조가 대표적이며, 본 연구에서는 음극 아크 증착법으로 TiAlN과 AlTiiN 층 조합을 이용하여 나노다층구조를 포함하는 다층막 시편을 제작하였다. 초격자 두께 주기 12.1 ~ 15.6 nm에서 35 ~ 55 GPa의 경도값을 가졌으며, 절삭공구 코팅분야에 적용할 예정이다.

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.32 no.10
• /
• pp.42-47
• /
• 2003

친환경 건축물의 건설을 유도$.$촉진하여 건축 분야에서 발생되는 환경부하를 저감시키고 건축물의 환경 친화적인 시공과 사용을 권장하기 위한 친환경 건축물 인증제도가 2002년 12월부터 시행중이다. 본 제도는 우선 공동주택을 대상으로 시행한 후 주상복합, 업무용, 상업용, 리모델링 건축물가지 단계적으로 확대하는 계획을 가지고 있다. 현재 시행중인 인증제도에서 친환경 건축물 평가지침은 1년 동안의 시범적용기간을 거쳤으며, 적용상 문제점이 노출되어 개정 작업을 준비중에 있다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2019.11a
• /
• pp.71-72
• /
• 2019

최근 공공안전 분야에서는 국민의 위험상황을 분석하여 선제적으로 예측을 하여 국민의 안전을 보장하기 위한 요구사항이 대두대고 있다. 또한 스마트폰 및 스마트워치와 같은 고성능 모바일 단말 기기들의 대중화로 인해 해당 기기들에 부착된 다양한 센서 데이터들을 융복합하여 분석할 경우, 수집한 센서 데이터의 잠재적 가치를 안전보장 측면에서 사용할 수 있는 장점이 있다. 본 논문에서는 대인, 대물, 장소에 해당하는 로그 데이터들을 융복합 분석하여 보호대상자의 안전을 지원하는 다중로그 플랫폼 기반 이동경로 분석 기법을 제안한다. 다중로그 플랫폼에서 수집하는 보호대상자의 이동 경로 궤적을 활용하여 과거에 축적된 이동경로 패턴과 비교를 통해 현재 경로가 평소에 이용하던 경로와의 유사도를 추천하게 된다. 해당 이동 경로 분석 시스템은 위치기반 멀티모달 센서 데이터를 융복합 하여 보호대상자의 안전을 보장하는데 기여 할 것으로 예상된다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.3
• /
• pp.1522-1530
• /
• 2014

High-rise residential complex type is getting important as new town development and urban regeneration in the downtown area. However, literature review of high-rise residential complex and research on satisfaction analysis of real residents are lack. Therefore, this paper is analyzing environmental friendly planning elements of high-rise building as housing subdivision, inside of building, facility, and maintenance by a survey on experts. The purpose of this paper is to suggest improvement method of environmental-friendly planning elements of high-rise residential complex by M-IPA. First, as a result, the part of housing subdivision has to keep complex land utilization, environmental-friendly transportation. Second, the part of inside of building shows that ecological housing subdivision, indoor air environment urgent and indoor temperature environment keeps maintaining. Finally, the part of facility/maintenance shows that material and facility, and index of energy management are urgently needed.