• Journal of Korean Tunnelling and Underground Space Association
• /
• v.17 no.3
• /
• pp.403-413
• /
• 2015

This paper presents the cutter bit damage due to the rotation speed of shield TBM cutter head in the mixed ground. The efficient of cutter bits and disk cutter are very important for tunnelling in mixed ground. In particular, this research is focused on the performance of cutter bits during excavation in mixed ground which is consist of the weathered soil and rock formation. In order to carry out this research, the experimental works are prepared performed by using the scaled shield TBM cutter bits evaluation machine developed. The mixed ground is prepared considering with a scale effect of tunnel size. Three different rotation speeds of shield TBM cutter head (i.e. 2, 3, 4 rpm) are applied in the experimental work. The drag forces acting on the cutter bits are measured at each cutter bit during rotation of cutter head. It is also analysed the variation of drag forces due to the rotation speed of shield TBM cutter head. The results of this research are clearly shown that the drag forces acting on the cutter bits are jumped up at the boundary between weathered soil and rock. It is also indicated that the jamping drag forces are increased with increasing the rotation speed of the cutter head. It is found from the research that the higher rotation speed of shield TBM cutter head will be high risk in the mixed ground. It is, therefore, suggested that the use of lower rotation speed of shield TBM cutter head is recommended for reducing the cutter bit damage in practice.

• Journal of Digital Convergence
• /
• v.13 no.5
• /
• pp.245-250
• /
• 2015

The P2P technology is becoming a technology for receiving a service, such as the latest YouTube and Facebook. P2P technology can be easily downloaded to a large amount of multimedia content over a distributed environment. However, pictures, music, a large amount of multimedia content such as videos each user is unable to manage the content management operating smoothly because, Song communication processing overhead caused when the reception is likely to remain the problem. In this paper, we propose a convergence content management technique that provides a low communication overhead of the frequency of use of the convergence content when trying to provide a large amount of convergence content to users in a distributed environment. Our method can be used to select the appropriate frequency is high among the shared content on the P2P multimedia environments that are distributed across a frequency of use of the convergence content and provides the service. Experimental evaluation proposed method, the convergence content browsing speed than conventional techniques improved communication about 13.3% and reduced overhead to about 9.5%.

• Transactions of the Korean hydrogen and new energy society
• /
• v.31 no.1
• /
• pp.144-150
• /
• 2020

This paper presents a numerical study on the design of composite head geometry used for compound processing machine. In order to achieve an optimum composite head geometry and to explain the interactions between the different geometric configurations, three dimensional computational fluid dynamics and design of experiment methods have been applied. From the 2k factorial design results, the most important design variable was found and the performance of the composite head was improved compared to the reference model.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2004.10a
• /
• pp.178-179
• /
• 2004

• Proceedings of the Korea Information Processing Society Conference
• /
• 2011.11a
• /
• pp.599-601
• /
• 2011

무선 센서 네트워크를 구성하는 센서노드들이 클러스터를 구성하고 선출된 클러스터 헤드가 클러스터 내의 센서노드들로부터 데이터를 받아서 병합한 다음, 기지국으로 데이터를 전달하는 클러스터 기반 라우팅 방법이 연구되어 왔다. 이 클러스터 기반 라우팅 방법에서 클러스터 헤드에 고장이 발생한다면, 해당 클러스터의 데이터는 기지국으로 전달할 수 없어 데이터 신뢰성에 문제가 생긴다. 이러한 문제를 해결하기 위해, 본 논문에서는 고장감내를 지원하는 클러스터 기반 라우팅 방법을 제안한다. 제안한 방법은 각 클러스터마다 백업 클러스터 헤드를 지정하여 원래의 클러스터 헤드에 고장이 발생한다면 백업 클러스터 헤드가 그 역할을 대신하도록 함으로써 데이터 전달의 신뢰성을 보장한다.

• Journal of the Korea Convergence Society
• /
• v.12 no.9
• /
• pp.161-168
• /
• 2021

As the demand for high speed and high precision increases in the field of machine tool, interest in stiffness and vibration of machine tool is increasing. However, it takes a lot of time to develop a detailed design of machine tool based on experience, and it is difficult to design appropriately. Recently, structural optimization using FEM are increasingly used in machine tool design. But, it is difficult to optimize in consideration of the vibration state of the structure since optimization through stress distribution of a structure is mainly used, In this paper, Static structural analysis, mode analysis, and harmonic analysis using FEM were conducted to optimize the head structure that has the most influence on machining in a 5-axis machine tool. It is proposed a topology optimization analysis method that considers both static stiffness and dynamic stiffness using objective function design.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1590-1594
• /
• 2007

This paper describes a case study on dynamic characteristics analysis of a 5-axis multi-tasking machine tool of ram-head typed. Natural frequency and corresponding vibration modes of the machine tool structure were obtained by using both FEM modal analysis and an experimental modal test(impulse hammer test). Both the theoretical and experiment analysis results showed good agreement with each other. Finally, some discussion and review, from the view point of resonance vibration and/or mode coupled chatter, were made based on the analysis results.

• Journal of Digital Convergence
• /
• v.14 no.1
• /
• pp.399-405
• /
• 2016

Head-Up Display, an information-providing display, is a device that provides necessary information through a vehicle window for a driver when driving, with which the driver secures the visibility and acquires information necessary for driving. Head-up displays in early days were mostly installed in imported vehicles but increasingly, being installed in medium and large-sized domestic vehicles, they secures convenience of driving and information acquirement. The information display element of each of currently released brand cars not only has limits in consistency and in displaying interface but also reveals the limitation of a way to apply GUI, being applied to dot reflective form in terms of the technology type. Accordingly, this study draws real time information element described as necessary during driving through case survey and analysis, and aims to provide a user with new GUI guideline through transparent display technology recently developed based on results analyzed with priority of POI(Point of Interest) information.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.6
• /
• pp.3089-3095
• /
• 2013

The headliner was made of polyurethane(PU) and glass fiber(GF) composite materials are widely used as a sound insulation material. A large amount of waste materials occurs as a by-product in the headliner manufacturing process. In order to efficiently reuse the headliner waste materials, separation process of the components are very necessary. According to the results of thermal analysis, weight loss showed increase in the order polyurethane foam> non-foaming polyurethane> non-woven fabric> 1st layer> glass fiber in the range of up to $400^{\circ}C$. Analysis of the DSC characteristics, HDPE, LLDPE, PP, and Master Batch by adding additives the wasted scrap. As a result, except for the PP, there was no exothermic transition due to the crystallization.

• Proceedings of the Korean Information Science Society Conference
• /
• 1998.10b
• /
• pp.45-47
• /
• 1998

객체지향 데이터베이스 시스템에서 많이 연구되고 있는 묵시적 권한부여(implicit authorization) 방법은 모든 객체에 대하여 일일이 권한을 부여하는 오버헤드를 줄이기 위한 방법이다. 묵시적 권한부여 방법에서는 기존의 권한과 새로이 추가될 권한간의 충돌(conflict) 여부의 효율적인 검사가 중요하다. 기존의 데이터베이스 단위 계층 구조( database granularity hierarchy)에서의 의도형 권한부여(intention type authorization) 기법은 자신의 자손 노드에 대한 권한을 쉽게 판정할 수는 있지만, 클래스 복합 계층 구조(class composition hierarchy)상에서의 임의의 한 노드 ni에 추가로 권한을 부여할 때 ni의 자손 노드와 복합 참조(composite reference)의 관계를 가지는 노드 nj들에 대한 권한과의 충돌 여부를 탐지하기 위하여 추가로 nj들에 대한 권한을 일일이 탐색해야 하는 어려움이 있었다. 본 논문에서는 클래스 복합 계층 구조에서의 묵시적 권한부여 하에서 발생할 수 있는 권한간의 충돌을 효율적으로 탐지하는 새로운 기법을 확장하여 제안한다. 제안된 복합 계층 의도형 권한부여(intention type authorization for composition hierarchy)기법은 계층 구조에서 복합 참조의 관계를 따라 nj를 일일이 탐색할 필요 없이 노드 ni에서 바로 충돌 여부를 판정할 수 있는 장점을 가진다.