• Journal of Welding and Joining
• /
• v.20 no.4
• /
• pp.451-458
• /
• 2002

플라즈마 용사법에 의한 섬유강화 복합 소재를 개발하면서 독특한 미세구조가 발견되었다. 이러한 형상은 코팅의 물리적 특성과 직접적으로 관련이 있다고 사료된다 섬유강화 코팅의 구조를 밝히기 위해 고배율 전자현미경이 사용되었으며 분석을 통해 일반적 용사코팅 의 미세구조가 내부에 투입된 강화 섬유(FIBER 또는 WHISKER)에 의해 변형되며 열적으로 anisotropic한 상태로 되었음을 보여주었다.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1993.04a
• /
• pp.35-35
• /
• 1993

튜브형 $\alpha-Al_2O_3$ 담체에 졸-겔 침지코팅법과 가압코팅(pressurized coating) 법으로 boehmite 졸과 극미세 입자 SiO$_2$ 및 TiO$_2$ 졸을 코팅한 후 200$\circ$C~500$\circ$C 에서 열처리하여 복합분리막을 제조하였다.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1994.04a
• /
• pp.58-58
• /
• 1994

슬립캐스팅법으로 제조한 튜브형 $\alpha$-알루미나 담체 (평균기공크기 = $0.1 \mum$)에 졸-겔 침지코팅(dipcoating) 또는 가압코팅 (pressurized coating) 법에 의하여 극미세입자 $\gamma$-AlOOH, $TiO_2, SiO_2$, 및 aluminosilicate diphasic 졸을 코팅한 후 300 ~ 500$\circ$C 에서 열처리하여 세라믹 복합막을 제조하였다. 복합막 전체에 대한 균열유무는 $N_2$ 기체투과율의 평균압력에 대한 의존성으로부터 평가하였으며, 한외여과 (ultrafiltration)에의 응용성을 규명하기 위하여 막의 재질 및 제조조건에 따른 polyethylene glycol (PEG) 수용액의 분획분자량 변화를 측정하였다. 합성 세라믹 복합막의 분획분자량 측정 결과 $SiO_2$의 경우 2,000 정도로 매우 우수하였으며 $\gamma-Al_2O_3, TiO_2$, 그리고 aluminosilcate 막들은 6,000 ~ 10,000 범위 값을 갖고 있었다. 또한 막의 기공크기 및 분획분자량을 제어하기 위한 방법으로서 $TiO_2$ 복합막을 300 ~ 700$\circ$C 에서 열처리하였으며 이들에 대한 분획분자량 변화를 비교 분석하였다.

• Composites Research
• /
• v.24 no.6
• /
• pp.12-17
• /
• 2011

Interfacial durability and electrical properties of CNT or ITO coated PVDF nanocomposites were investigated for self-sensor and micro actuator applications. Electrical resistivity of nanocomposites for the durability on interfacial adhesion was measured using four points method via fatigue test under cyclic loading. CNT/PVDF nanocomposite exhibited lower electrical resistivity and good self-sensing performance due to inherent electrical property. Durability on the interfacial adhesion was good for both CNT and ITO/PVDF nanocomposites. With static contact angle measurement, surface energy, work of adhesion, and spreading coefficient between either CNT or ITO and PVDF were obtained to verify the correlation with interfacial adhesion durability. The optimum actuation performance of CNT or ITO coated PVDF specimen was measured by the displacement change using laser displacement sensor with changing frequency and voltage. The displacement of actuated nanocomposites decreased with increasing frequency, whereas the displacement increased with voltage increment. Due to nanostructure and inherent electrical properties, CNT/PVDF nanocomposite exhibited better performance as self-sensor and micro actuator than ITO/PVDF case.

• Composites Research
• /
• v.25 no.5
• /
• pp.159-163
• /
• 2012

The coating of metal surface with carbon nanotubes(CNTs) has been studied for the heat transfer enhancement of the boiling and condensation of refrigerant. The multiwalled carbon nanotube/copper oxide(CuO) composite powder, which has been surface modified by dispersant and polyvinyl alcohol solution, was ultrasonically sprayed and sintered on a copper wafer. In this paper, experiments were performed to assess the characterization and comparison of the carbon nanotube before and after sinterning and the morphology changes of the CNT/CuO-coated surface by using different dispersants. The dispersants used are THF (Tetrahydrofuran), SDBS(Dodecylbenzenesulfonic acid sodium salt), SDS(Sodium dodecy sulfate). The samples were examined by scanning electron microscopy(SEM), thermogravimetric analysis(TGA), differential scanning calorimeter(DSC) and Raman spectroscopy.

• Composites Research
• /
• v.26 no.6
• /
• pp.373-379
• /
• 2013

The coating of metal surface with carbon nanotubes (CNTs) has been studied for the heat transfer enhancement of the boiling and condensation of refrigerant. The MWCNT/copper composite powder was made by the attrition ball milling, which has been coated on the copper wafer by electrostatic powder coating and sintered with electric furnace. In this paper, experiments were performed to assess the characterization and comparison of CNT before and after sinterning and the morphology changes of the CNT/Cu-coated surface. The samples were examined by the scanning electron microscope (SEM), energy-dispersive X-ray spectroscopy (EDAX) and raman spectroscopy. To verify the heat transfer enhancement, boiling heat transfer tests were performed.

• Journal of Welding and Joining
• /
• v.7 no.4
• /
• pp.46-55
• /
• 1989

Zirconia coatings are performed by the plasma spraying on the substrate of Al-Si alloy. In case of plasma sprayed ceramic coatings, it is important to control properly residual stress occurred during cooling process. Residual stress in coating layer varies with sprayed conditions and is influenced greatly by the coating layer thickness. Surface residual stress due to coating layer thickness is measured by X-ray diffraction method and the residual stress in coating layer is estimated by the deflection of coating layer when the restraint force in substrate was removed. When zirconia was coated on the substrate, tensile residual stress remains on zirconia coated surface layer. The tensile stress is increased to 0.35mm thickness and after 0.45mm thickness it is decreased abrouptly. A thick bond and composite coating reduce the zirconia surface stress and composite coating controls effectively the thick zirconia surface stress.

• Proceedings of the KAIS Fall Conference
• /
• 2005.05a
• /
• pp.279-282
• /
• 2005

본 연구에서 광촉매 $TiO_2$/P-25를 알루미늄 금속판에 코팅하여 코팅 조건에 따른 IPA 분해 활성을 고찰한 결과, 무기계 바인더인 KR-400, 유$\cdot$무기복합 바인더인 TMOS, 유기계 바인더인 A-9540을 사용하여 코팅한 알루미늄 금속판의 표면상은 모두 깨끗하였다. 부착력은 무기계 바인더를 제외한 바인더에서 우수한 것으로 나왔다. 또한 IPA 분해 효율은 무기계 바인더 < 유$\cdot$무기 복합 바인더 < 유기계 바인더 순으로 나타났다. 유$\cdot$무기복합 바인더와 P-25의 비율을 10: 10, 8.3: 10, 6.6: 10, 5: 10, 3.3: 10, 1.6: 10으로 바꾸어 광분해 실험을 수행한 결과, 1.6:10일 때 IPA 분해 효율이 가장 우수하였다. 상용화된 타사(A사, B사) 제품과의 성능 비교 결과, 본 연구에서 사용한 바인더(A-9540): P-25의 비율을 1: 6으로 배합하여 코팅 한 알루미늄 판의 IPA분해 효율이 가장 우수하였다.

• Journal of the Korean Ceramic Society
• /
• v.41 no.4
• /
• pp.328-333
• /
• 2004

Hydroxyapatite (HAp) and HAp-Ag composite layers were coated on ZrO$_2$and Si wafer substrates by RF magnetron sputtering technique. The thickness of coating layers was in the range of 0.7∼1.0$\mu\textrm{m}$ and its roughness was 3∼4nm. The heat treated HAp coating layers were composed with nano-sized crystallines. However, the HAp-Ag composite layers showed the mixed structure with crystalline and amorphous phases. The Ca/P ratio of the as-received HAp coating layer was 1.9, but, the value was decreased as the Ag content with increased. Also, the Vickers hardness of HAp coating layer decreased as the Ag content increase.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.44 no.2
• /
• pp.183-190
• /
• 2024

An environmentally-friendly nanocoating method that effectively adds flame retardant(FR) and gas shielding properties to combustible polymeric construction materials such as flexible polyurethane (PU) foam was studied. Naturally-driven two-dimensional(2D) nanomaterials such as graphene oxide (GO) can exhibit liquid crystalline (LC) properties in aqueous solutions, enabling uniform coatings on the various substrates including 3D-porous foams. LC phase-assisted coating serves as 3D-scaffold, facilitating the introduction of small molecules having antioxidant capabilities such as dopamine which is to form uniformly stacked FR coating. Additionally, the structural characteristics of the 2D-materials can effectively hinder the migration of toxic gases and flammable substances in the gas phase generated during combustion. This LC phase flame retardant coating technology could be a new approach to provide environmentally friendly and effective flame retardant and gas barrier properties to various types of polymeric materials.