• Composites Research
• /
• 제12권1호
• /
• pp.37-46
• /
• 1999

본 연구에서는 직접 설계 제작된 금형을 사용하여 임의의 적층각을 갖는 복합재 원통셸을 제작하였으며, 양단자유와 양단고정 경계조건에 대한 진동해석 및 모드시험을 수행하였다. 실험으로부터 구해진 고유진동수와 모드형상결과를 이론 및 유한요소해석 결과와 비교하였고 서로 잘 일치함을 확인하였다. 따라서 이러한 결과로부터 본 연구의 복합재 원통셸을 제작방법이 실험실 수준에서 손쉽게 고품질의 복합재 원통셸을 제작하는 성형법 연구에 기여할 수 있음을 알 수 있었다.

• 대한기계학회논문집A
• /
• 제20권5호
• /
• pp.1436-1444
• /
• 1996

The problem ofinstability of laminated circular cylindrical shell under the action of torsio or lateral pressure is investigated. The analysis is based on the Sander's theory for finite deformations of thin shell. The buckling is elastic for thin compoisite shell nad the geometry is assumed to be free of initial imperfections. The equilibrium equations are obrained by usitn the p[erturbation technique. Solution procedure is based on the Galerkin mehtod. The computer program for numerical results is made for several stacking sequence, length-to-radius ratio, and radius-to-thickness ratio. The numerical results of buckling load are present.

• 한국생산제조학회지
• /
• 제7권6호
• /
• pp.12-18
• /
• 1998

The optimal design for stiffened laminate composite cylindrical shells under combined loads is studied by a nonlinear mathematical search algorithm. The optimal design is accomplished with the CONMIN. several types of buckling modes with maximum allowable stresses and strains are included as constraints in the optimal design process, such as general buckling, panel buckling with either stringers or rings smeared out, local skin buckling, local crippling of stiffener segments. Rectangular or T type stringers and rectangular rings are used for stiffened laminate composite cylindrical shells.

• 대한기계학회논문집A
• /
• 제36권1호
• /
• pp.51-58
• /
• 2012

본 연구는 외부 수압을 받는 복합재 원통 셸에 대해서 원통 좌굴식 (ASME 2007,NASA SP- 8007)과 유한요소법을 이용하여 좌굴 압력을 예측하기 위함이다. 본 연구에 사용된 모델은 적층 각도 [0/90]$_{12t}$ 이며 복합재 재질은 USN 125 이다. 복합재는 프리프래그 방식으로 제작되었다. 본 논문에 사용된 연구 방법은 원통 셸의 좌굴식, 유한요소해석을 수행하고 이를 실험으로 검증 하였다. 원통 셸의 좌굴식과 유한요소 결과를 비교하기 위하여 $20^{\circ}{\sim}90^{\circ}$까지 $5^{\circ}$씩 변화시켜 도식화 하여 비교하였다. 유한요소해석의 결과는 선형과 비선형은 안전율 0.85~1.0 으로 잘 일치하였다. 좌굴 압력식은 적층각이 증가할수록 좌굴압력이 증가하였다. 유한요소 해석과 비교하면 ASME 2007 식이 NASA SP-8007 식보다 안전율이 더 큰 식임을 알 수 있었다.

• 대한기계학회논문집A
• /
• 제24권9호
• /
• pp.2292-2301
• /
• 2000

We propose an accurate and efficient estimation method of transverse shear stresses for analysis and design of laminated composite structures by 4-node quadrilateral degenerated shell elements. To get proper distributions of transverse shear stresses in each layer, we use 3-dimensional equilibrium equations instead of constitutive equations with shear correction factors which vary diversely according to the shapes of shell sections. Three dimensional equilibrium equations are integrated through the thickness direction with complete polynomial membrane stress fields, which are recovered by REP (Recovery by Equilibrium in Patches) recovery method. The 4-node quadrilateral degenerated shell element used in this paper has drilling degrees of freedom and shear stresses derived from assumed strain fields that are set up at natural coordinate systems. The numerical results demonstrate that the proposed estimation method attains reasonable accuracy and efficiency compared with other methods and FE analysis using 4-node degenerated shell elements.

• 대한기계학회논문집
• /
• 제16권4호
• /
• pp.630-648
• /
• 1992

본 연구에서는 여러가지 하중조건하에서 단순지지된 보강원통셸의 최소중량화 설계문제를 CONMIN을 사용하여 해석하고, 일반적인 대칭적층[0/.+-..theta./90]$_{s}$ 의 복합 적층원통셸, 복합적층honeycomb sandwich원통셸, 그리고 보강된 복합적층원통셸의 최 소중량화 설계문제에도 확장 적용한다. 설계변수(design variable)로는 등방성재료 인 경우와 복합적층인 경우 최대 9개, 부등제한조건으로는 전체좌굴(general buckling ), 준전체좌굴(panel buckling), 판 및 보강재의 국부좌굴(local cripping), 로링모드 (rolling mode), 그리고 응력과 변형률제한 등의 성질제한조건(behavior constraints) 과 설계변수의 상, 하한을 나타내는 기하학적 제한(side constraints)등 최대 32개를 설정한다. 본 최소중량화 설계예에서는 보강재의 최적단면형상을 검토하기 위하여 직사각형(R)형, I형, 그리고 T형 단면 등의 보강재들을 사용한다.

• 대한기계학회논문집
• /
• 제17권8호
• /
• pp.2051-2060
• /
• 1993

A finite element program using degenerated shell element was developed to solve the geometric, material and combined nonlinear behaviors of composite laminated shell. The total Lagrangian method was implemented for geometric nonlinear analysis. The material nonlinear behavior was analyzed by considering the matrix degradation due to the progressive failure in the matrix and matrix-fiber interface after initial failure. The result of the geometric nonlinear analysis showed good agreement with the other exact and numerical solutions. The results of the combined analyses considered both geometric and material nonlinear analyses were compared with the experiments in which internal pressure was applied to the filament wound antisymmetric tubes.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 추계학술대회 논문집
• /
• pp.410-413
• /
• 2005

The results of an experimental and analytical study of composite pressure hull on buckling pressure are presented for LRN 300. Composite tensile test was done to know the composite material properties applied FE analysis for URN composite. We predicted the buckling and post buckling analysis of composite laminated cylindrical panels under external compression by using ABAQUS /Standard[Ver 6.4]. To obtain nonlinear static equilibrium solutions for unstable problems, where the load-displacement response can exhibit the type of nonlinear buckling behavior, during periods of the response, the load and/or the displacement may decrease as the solution evolves, used the modified Riks method. The modified Riks method is an algorithm that allows effective solution of such cases [7]. Experiments were conducted to verify the validation of present analysis for cross-ply laminated shells. The shells considered in the study have two different lamination patterns, $[{\pm}45/0/90]_{18s\;and}\;[/0/90]_{18s}$. Cylindrical panel of experiment and analysis have the radius of 200mm, length of 210mm and 60 degree of cutting angle. The critical load from experiment is $69\%$ of that of numerical analysis, because the fracture of matrix was generated before buckling. So URN 300 is not proper to use at the condition under high external pressue.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2005년도 후기학술대회논문집
• /
• pp.212-213
• /
• 2005

The results of an experimental and analytical study of composite pressure hull on buckling pressure are presented for URN 300. We predicted the buckling and post buckling analysis of composite laminated cylindrical shell and panel under external compression by using ABAQUS/Standard[Ver 6.4]. To obtain nonlinear static equilibrium solutions for unstable problems, where the load-displacement response can exhibit the type of nonlinear buckling behavior, during periods of the response, the load and/or the displacement may decrease as the solution evolves, used the modified Riks method. Experiments were conducted to verify the validation of present analysis for cross-ply laminated shells. The shells considered in the study have four different lamination patterns, [${\pm}{\Theta}$/0/90]$_{14s}$,[${\pm}{\Theta}_{14}$/$0_{14}$/$90_{14}$],[${\pm}$45/0/90]$_{18s}$ and [/0/90]$_{18s}$. At the result of this study, the optimized ply orientation angle is $75^{\circ}$. The critical load from experiment is 69% of that of numerical analysis, because the fracture of matrix was generated before buckling. So URN 300 is not proper to use at the condition under high external pressure.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 춘계학술대회 논문집
• /
• pp.458-462
• /
• 2005

This paper deal with the optimal lamination condition of cylindrical shell applied new composite URN300 for a study of composite empirical formula. Finite element analyses for isotropic materials considered element numbers and boundary conditions are compared with existing empirical formulas to apply FE analysis for composite. And composite tensile test is done to know the composite material applied FE analysis for composite. The results of FE analyses for isotropic materials have indicated that Optimal element number and boundary condition were 1600 and both simple support. These conditions were applied in composite FE analyses. Ply orientations and lamination patterns in FE analyses for composite were considered. Ply orientations are $0^{\circ},\;15^{\circ},\;30^{\circ},\;45^{\circ},\;60^{\circ},\;75^{\circ},\;and\;90^{\circ}$. Lamination patterns are $[\pm\theta/0/90]_{14s]$ and $[\pm\theta_{14}/0_{14}/90_{14}]_s$ in FE analysis. Lamination pattern $[\pm\theta_{14}/0_{14}/90_{14}]_s$ is the equivalent model of $[\pm\theta/0/90]_{14s}$. At the result of this study, the FE analyses for composite have indicated that the optimized ply orientation $75^{\circ}$ is and real model must use in FE analysis for accurate results.