• Composites Research
• /
• v.19 no.3
• /
• pp.7-14
• /
• 2006

In this paper, an integrated probabilistic strength analysis was conducted to predict the reliability of a composite pressure vessel under inner pressure loading condition. As a probabilistic strength analysis, the probabilistic progressive failure model consisting of progressive failure model and Monte Carlo simulation was incorporated with a commercial FEA code, ABAQUS Standard, to perform the probabilistic failure analysis of composite structure which has a complex shape and boundary conditions. As design random variables, the laminar strengths of each direction were considered. Finally, from probabilistic strength analysis, the scattering of burst pressure could be explained and the reliability of composite pressure vessel could be obtained for each component. In case of composite structures in mass production, the effects of uncertainties in material and manufacturing on the performance of composite structures would apparently become larger. So, the probabilistic strength analysis is essential for the structural design of composite structures in mass production.

• 한국전기화학회:학술대회논문집
• /
• 2005.07a
• /
• pp.201-206
• /
• 2005

본 연구는 기 개발 완료된 천연가스차량용 200bar급 Type 3 복합재 압력용기를 개발로 축척된 핵심요소기술과 실질적인 경험을 바탕으로 수소연료전지 차량에 탑재할 350bar급 Type 3 복합재 압력용기에 대한 설계/해석과 시험평가의 핵심적인 사항을 고찰하였다. 설계/해석에는 350bar급 Type 3 복합재 압력용기에 대한 3차원 비선형 유한요소 모델링 및 해석기법이 제시되었고, 설계된 라이너형상과 와인딩 패턴을 이용하여 필라멘트 와인딩 공법으로 1차시제품을 제작하였다. 제작된 시제품에 대하여 파열시험 및 반복피로시험을 수행하여 설계/해석 기법의 타당성을 검증하였다.

• Composites Research
• /
• v.20 no.4
• /
• pp.31-41
• /
• 2007

Dome shape design methods of Filament Winding (FW) composite pressure vessel, which can suggest various dome contour according to the external loading conditions, were investigated analytically and numerically. The performance indices(PV/W) of the pressure vessels with same cylinder radius and boss opening but different dome shape were evaluated by finite element analysis under the internal pressure loading condition. The analysis results showed that as the dome shape becomes flat, the performance index decreases significantly due to the reduced burst pressure. Especially, for the case of the high value of the parameter ro, the ratio between the radii of the cylinder part and the boss opening, the flat dome is disadvantageous in the aspect of the weight reduction, and additional reinforcing dome design technique should be required to increase the burst pressure. For example, above ro=0.54 condition, the dome shape change according to the loading condition could cause the low burst pressure and increase of composite weight in dome region and is not recommendable except for the special case that maximum inner volume or sufficient space between skirt and dome is the primary design objective. However, at ro=0.35, the dome shape change brings not so significant differences in the performance of FW vessel.

• Defense and Technology
• /
• no.10 s.164
• /
• pp.38-42
• /
• 1992

복합재 압력용기의 제작 및 사용중에 발생하는 결함(손상)의 비파괴검사를 통해 구조물의 건전성을 평가하는 것은 제품의 품질보증 관점에서 아주 중요합니다. 복합재에서는 여러 종류의 결함이 동시에 존재할수 있으며, 결함-기계적 성질-비파괴특성 사이의 상호관계는 완전히 알려져 있지 않습니다. 이글에서는 복합재 연소관에 존재하는 결함의 위험도와 결함 탐지를 위한 비파괴 검사 기법에 대해 먼저 살펴보았습니다. Filament Winding으로 제조한 복합재 연소관의 Proof Testing과 관련해 음향방출(AE)법에 의한 최근의 연구결과를 살펴본 다음, 연소관의 신뢰도 확보를 위한 비파괴 평가 방법에 대해 앞으로의 연구 방향을 제시하였습니다

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.1
• /
• pp.31-37
• /
• 2013

This study aims to find the optimal skirt dimensions for a composite pressure vessel with a separated dome part. The size optimization for the skirt structure of the composite pressure vessel was conducted using a sub-problem approximation method and batch processing codes programmed using ANSYS Parametric Design Language (APDL). The thickness and length of the skirt part were selected as design variables for the optimum analysis. The objective function and constraints were chosen as the weight and the displacement of the skirt part, respectively. The numerical results showed that the weight of the skirt of a composite pressure vessel with a separated dome part could be reduced by a maximum of 4.38% through size optimization analysis of the skirt structure.

• Composites Research
• /
• v.21 no.6
• /
• pp.23-30
• /
• 2008

In this paper, the effect of the natural aging on the strength distribution and structural service life of a Filament Wound (FW) composite pressure vessel was studied. The fiber failure strain, which is varied significantly, was considered as the design random variable and the strength analysis was carried out by probabilistic numerical approach. The progressive failure analysis technique and the First Order Reliability Method (FORM) were embedded in this numerical model. As the calculation results, the probability of failure was obtained for each aging time steps and it is found that the strength degradation in FW composite pressure vessel, due to the natural aging, appears within 10 year-aging-time. As an example of the life prediction under natural aging using arbitrary laminated model, the service lifetime of 13 years was predicted based on the probability of failure of 2.5% and the design pressure of 3,250 psi.

• Composites Research
• /
• v.21 no.1
• /
• pp.1-7
• /
• 2008

Composite vessels for high pressure gas storage are commonly used these days because of their competitive weight reduction ability maintaining strong mechanical properties. To supplement permeability of composite under high pressure, it is usually lined by metal, which is called a Type 3 vessel. However, it has many difficulties to design the Type 3 vessel because of its complex geometry, fabrication process variables, etc. In this study, therefore, GUI (graphic user interface) optimal design code for Type 3 vessels was developed based on semi-geodesic algorithm in which various factors of geometry and fabrication variables are considered and genetic algorithm for optimization. In addition, hydrogen vessels for 350/700 bar that can be applied to FCVs(fuel cell vehicles) were designed using this code for verification.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.21 no.3
• /
• pp.313-318
• /
• 2001

To establish nondestructive test method for aerospace composite materials, various composite specimens were tested and analyzed using acoutic emission. The hit rate of acoustic emission closely was rotated with crack initiation and propagation. This report also presents defection capability of crack initiation pressure, initial crack active location, and crack propagation using acoustic emission.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.529-535
• /
• 2017

In this paper the laminate design parameters are researched to maximize the performance index of a composite pressure vessel. The pressure-resistant performance and the light-weight concept with contained internal space are implied in the performance index. To maximize the performance index, the three design variables that the thickness of each of helical and hoop layers and the length of hoop layer are considered under the assumption of fixed internal space. To optimize the variables, the response surface method is introduced for construction of the surrogate model and the ANOVA(analysis of variance) is performed to evaluate the effects of the variables. The optimization problem is formulated to maximize performance index under the burst pressure constraint. To verify the effectiveness of the research, numerical analyses are performed for the optimum model.

• Composites Research
• /
• v.23 no.6
• /
• pp.7-13
• /
• 2010

Type3 cylinder is a composite pressure vessel fully over-wrapped with carbon/epoxy composite layers over an aluminum liner, which is the most ideal and safe high pressure gas container for CNG vehicles due to the lightweight and the leakage-before-burst characteristics. During service in CNG vehicle, if a fiber cut damage occurs in outer composite layers, it can degrade structural performance, reducing cycling life from the original design life. In this study, finite element modeling and analysis technique for the composite cylinder with fiber-cut crack damage is presented. Because FE analysis of type3 cylinder is path dependant due to plastic deformation of aluminum liner in autofrettage process, method to introduce a crack into FE model affect analysis result. A crack should be introduced after autofrettage in analysis step considering real circumstances where crack occurs during usage in service. For realistic simulation of this situation, FE modeling and analysis technique introducing a crack in the middle of analysis step is presented and the results are compared with usual FE analysis which has initial crack in the model from the beginning of analysis. Proposed analysis technique can be used effectively in the evaluation of influence of damage on composite layers of type3 cylinder and establish inspection criteria of composite cylinder in service.