• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.13 no.1
• /
• pp.39-45
• /
• 1999

Because of internal voids in insulators give rise to partial discharge(PD), which cause local breakdown and even entire insulation breakdown. Treeing due to PD is one of the main causes of breakdown of the insulating materials and nrluction of the insulation life. 1berefore the necessity for establishing a rrethod to diagnose the aging of insulation materials and to predict the breakdown of insulation has becorne irrportant. From this viewpoint, our studies diagnose insulation degradation using the rrethod of computer sensing system, which has PD and acoustic emission(AE) sensing system. To use advantages of these two methods can be used effectiveiy to search for treeing location and PD in sorre materials. In analysis rrethod of degradation, we analyzed the PD and AE pulses by regression analysis, corrpared to these obtained the correlation coefficient and retermination coefficient by T-distribution and saw that PD and AE pulses show a similar pattern on the whole. This has a similar teIlrency to the results of the research by Yoshimura and Fujita.Fujita.

• Proceedings of the KIEE Conference
• /
• 2008.09a
• /
• pp.92-94
• /
• 2008

폴리머 애자는 경량, 미려함, 소형, 비 분해 폭발 특성과 같은 다양한 장점 때문에 세라믹 애자를 대체하여 사용이 증가되고 있다. 그러나 폴리머 재료는 동일 목적의 세라믹 애자에 비하면 열화가 빠르고 성능이 저하되는 문제점이 있다. 최근 폴리머 애자의 사용기간이 10년 이상 경과하면서 이들에 대한 교체시기에 관한 관심이 증가하고 있으나 사용기간이 짧아 교체 시기론 예측하기 불가능한 실정이다. 이에 따라 본 논문에서는 국내에서 사용중인 폴리머애자 신품과 경년품의 복합가속열화시험을 실시하고 자연열화 시료와 비교하여 장기 열화특성을 평가하고 최적 교체방법을 제안하였다.

• Proceedings of the KIEE Conference
• /
• 2003.10a
• /
• pp.131-133
• /
• 2003

폴리머애자는 기존 자기애자에 비하여 많은 장점을 가지고 있어 세계적으로 사용량이 증가하고있다. 그러나 폴리머재질을 사용함으로써 열화과정을 거치게 되어 있다. 폴리머애자의 장기신뢰성 및 수명 예측을 위하여 븐 연구에서는 복합가속열화시험장치에 의한 모의 열화시험, 현장 애자의 주기적인 발취 시험, 옥외 실증시험장에서의 애자상태 감시 둥을 통하여 폴리머애자의 장기신뢰성을 검증할 계획이다. 또한 새로운 장기 신뢰성 평가방법에 대한 연구도 진행될 것이다.

• Journal of Conservation Science
• /
• v.31 no.2
• /
• pp.87-94
• /
• 2015

Plastic artwork can be appeared crack, change of color and whitening event by various environment conditions. A large scale plastic artwork often exhibits in outside it will be directly degraded by physical and chemical degradation factor such as strong sunlight, high humidity and rainfall. We should know degradation characteristic of plastics to prevent these damages. In this study, we studied degradation characteristic of plastics (5 types of wide use plastics; polypropylene, polystyrene, polyethylene, polyvinyl chloride, polyurethane) depending on various artificial degradation conditions such as high temperature, ultraviolet and these complex conditions (high temperature and ultraviolet). As a result, polypropylene, polystyrene and polyethylene show the most visible change especially polypropylene, polystyrene. Polypropylene didn't show a great change degree of tensile strength and contact angle, on the other hand polystyrene did. Polypropylene and polystyrene weakened by photo degradation, polyvinyl chloride and polyurethane had relatively good light stability. Also the high temperature and complex conditions were most degradation characteristic. High temperature worked for degradation catalyst because its energy can not enough worked for cut off binding energy of plastics while ultraviolet condition effected as directly degradation condition. Though following results, we expect it can be applied to investigation of degradation factor depending on plastic artwork materials and basic result of plastic artworks conservation.

• Composites Research
• /
• v.17 no.3
• /
• pp.8-14
• /
• 2004

The effect of moisture absorption on the mechanical properties in carbon fiber reinforced composites has been investigated with various moisture environment such as sea water, tap water and distilled water. It also has been studied about the influence of drying of the immersed specimen for a certain period of time on the mechanical properties. As a result, we found that the ratio of moisture absorption mainly depended on the immersion time in the moisture environment and that of the immersed specimen for a certain period of time decreased with the drying time. We also found that tensile strength decreased with the increasing of the ratio of moisture absorption and the tensile strength decreased by moisture absorption recovered up to some extent by drying the specimen.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.397-400
• /
• 2016

In digital images, the addition due to noise occurs in the process of obtaining, saving, and transmitting. For examples of noise, there are salt and pepper noise, Gaussian noise, and composition noise where various noises are mixed. Existing filters have insufficient noise removal characteristics because it uses single filters in composite noise environment. Therefore the study suggested a switching filter that processes with special weighted value and median filter according to local mask salt and pepper noise density when central pixel is damaged by salt and pepper noise, and processes by applying weighted values differently according to standard deviation of local mask when damaged by Gaussian noise.

• Journal of the Society of Disaster Information
• /
• v.13 no.3
• /
• pp.332-339
• /
• 2017

In the case of aged structures, the information of the structure is often lost after the completion of construction, and there is a great difficulty in predicting the durability life of the structure due to the lack of information on concrete formulations. In this study, the durability of concrete specimens was evaluated by various field and indoor test methods based on the core specimens collected from the field, and the durability life of the concrete structures was predicted by using the FEM analysis technique.As a result, the neutralization rate coefficient was $5.38E-6(cm^2/day)$ and the rate of progress was low. And the possibility of complex deterioration due to carbonation and salting was found to be very low.

• Journal of Institute of Convergence Technology
• /
• v.10 no.1
• /
• pp.13-17
• /
• 2020

Among the factors that must be taken into account when using thermal imaging cameras that are expanding their application to various fields, a basic study was conducted focusing on temperature on the effect of solar radiation on the photographed thermal image. Through all experiments, in order to use an image taken with a thermal imaging camera for an object installed or located outdoors, a separate temperature correction according to the size of solar radiation or a separate device to block the effect of solar radiation must be additionally installed. Since the temperature of the same object may vary in the thermal image taken indoors or outdoors, it is necessary to calibrate it through comparison with other temperatures as a reference point. In the case of measuring the temperature of a glossy surface such as metal indoors with a thermal imaging camera, it was confirmed that an environment that can remove the light reflection effect by the glossy surface must be constructed and photographed.

• Composites Research
• /
• v.36 no.5
• /
• pp.315-320
• /
• 2023

In the manufacturing process of thermosetting carbon fiber composite materials using an autoclave, the internal temperature changes according to the set temperature cycle. This temperature change causes the resin in the composite material to cure. Heat is generated through the chemical reaction of the resin, which can result in a difference between the temperature inside the autoclave and the temperature of the composite material. Previous research assumed that the temperatures of the composite material and the autoclave were the same and analyzed to predict the residual stress and thermal deformation after manufacturing. However, these stresses and deformations depend on the temperature and degree of cure of the composite material. Therefore, this study verifies a thermal-chemical model analysis technique that takes into account the heat generated by the chemical reaction of the resin to accurately calculate the temperature and degree of cure. Additionally, case studies were conducted for different thicknesses to investigate whether this model exhibits similar trends across varying thicknesses.

• Journal of Institute of Convergence Technology
• /
• v.2 no.2
• /
• pp.30-34
• /
• 2012

The SI thermochemical cycle process accomplishes water splitting through distinctive three chemical reactions. We focused on thermodynamic models applicable to the process. Recently, remarkable models based on the assumed ionic species have been developed to describe highly nonideal behavior on the liquid phase reactions. ElecNRTL models with ionic reactions were proposed in order to provide reliable process simulation results for phase equilibrium calculations in Section II and III. In this study, the current thermodynamic models of SI thermochemical cycle process were briefly described and the calculation results of the applied ElecNRTL models for phase equilibrium calculations were illustrated for binary systems.