• Proceedings of the Korea Concrete Institute Conference
• /
• 2009.05a
• /
• pp.265-266
• /
• 2009

To know the thermal-moisture condition of the concrete is very important to expect the concrete durability such as chloride attack, carbonation, alkali-aggregate reaction, freezing damage. The purpose of this study is to establish the temperature-moisture coupled model which is based on the finite element method and measure temperature and relative humidity under the exposured condition.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2003.11a
• /
• pp.86-89
• /
• 2003

It is recognized that reinforcement corrosion is the main distress behind the present concern regarding concrete durability. In this study, to confirm corrosion of reinforced concrete affected by thickness of cover, kinds of surface coating, measured electric potential, ratio of corrosion area, weight reduction, corrosion velocity of steel bar under environment of complex deterioration. The results showed that an increase in age also increases corrosion of steel bar. Ratio of corrosion area is largely related to ratio of weight reduction. as well, corrosion of steel bar by thickness of cover is superior to l0mm thick than 20mm thick. It showed that an increase in thickness of cover prevent steel bar from deteriorating. The results of this study showed that corrosion velocity was affected by thickness of cover, kinds of surface coating. data on the development of corrosion velocity made with none, organic B, organic A, inorganic B, and inorganic A is shown.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07a
• /
• pp.435-438
• /
• 2002

In this paper, the effect of surface tension, wettability, flow rate of contaminants with varying surfactant content and frequency of applied voltage on the tracking breakdown of epoxy insulating materials were investigated. As the flow rate of contaminant is increased, the surface resistivity is decreased, and the leakage current is increased, the time to tracking breakdown is decreased. It is found that time to tracking breakdown depends on the surface tension of contaminant, that is difference of wettability And as the frequency of applied voltage is increased, time to tracking breakdown decreased.

• Proceedings of the KIEE Conference
• /
• 1996.07c
• /
• pp.1710-1712
• /
• 1996

This paper was practiced insulation failure test forcing to accelerate on frequency of 420 HZ. There was manufactured generator stator windings for 500MVA thermal plants and selected accelerating deterioration voltage of 5.5kV/mm for electrical aging. Moreover, so as to verification of this experiments, we carried out modeling analysis due to finite element method using to ANSYS5.0 program for common package and imitated multi-stress aging for analyzing electrical and mechanical stress distribution.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.7 s.94
• /
• pp.1761-1771
• /
• 1993

In this paper, the design of thick laminated composite plate subjected to thermal buckling load under uniform temperature distribution is presented. In the design procedures of composite laminated plates for maximum thermal buckling load. the finite element method based on shear deformed theory is used for the analysis or laminated plates. One-demensional search method is used to find optimal fiber orientation and, in the next step, optimal thickness is investigated. Design variables such as fiber orientation and ply thicknesses coefficient of plates are adopted. The optimal design for the symmetric or antisymmetric laminated plates consisted of 4 layers with maximum thermal buckling load is performed.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.7 s.94
• /
• pp.1686-1699
• /
• 1993

In this paper, the thermal buckling of thick composite angle-ply laminates subject to uniform temperature distribution is studied. For the plates of 4-edges simply supported condition and those of 4-edges clamped condition, the critical buckling temperatue is derived, using tile finite element method based on the shear deformation theory. The effects of lamination angle, layer number, laminate thickness, plate aspect ratio and boundary constraints upon the critical buckling temperature are presented.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.8B
• /
• pp.1183-1188
• /
• 2001

잡음 재밍과 톤 재밍의 혼합 재밍이 존재하는 Rayleigh 페이딩 환경에서 재머상태정보(JSI)를 이용한 FH/MFSK 시스템의 성능 향상을 분석하였다. 송신 신호와 재머 성분은 각각 Rayleigh 페이딩 환경의 영향을 받으며, 재머상태 정보는 잡음 잡음의 전력이나 톤 재밍의 크기 및 전력을 알 수 있다고 가정하였다. 분석 결과, JSI를 이용한 시스템이 잡음성 재밍의 비율 변동에 관계없이 JSI를 고려하지 않는 시스템보다 성능 향상을 얻을 수 있다. $E_{s}$ /$J_{o}$ =10[dB]인 Rayleigh 페이딩환경에서 JSI가 없는 시스템의 경우, 잡음재밍이 비율에 관계없이 최대의 성능 열화값을 갖는 톤 재밍의 비율은 0.1이나, JSI를 이용한 시스템은 다른 값을 가지게 되어, 잡음성 재밍과 톤 재밍의 적절한 비율이 시스템의 성능저하에 최대로 영향을 끼칠 수 있음을 알 수 있다.

• Proceedings of the KIEE Conference
• /
• 2002.07c
• /
• pp.1443-1445
• /
• 2002

내전압과 내아크성을 높이고 $SF_6$가스 내에서 복합재료로 사용된 유리섬유를 보호하기 위한 코팅 재료를 만들어서 특성을 평가하였다. 에폭시 수지에 내아크성이 우수한 무기물 필러인 $Al_2O_3$, $MgAl_2O_4$, BN, MgO 등을 첨가하여 절연저항, 유전특성, 내아크성 등의 전기적 특성을 평가하였다. 코로나 처리에 의한 열화를 평가하기 위하여 접촉각을 측정하고 전자현미경으로 표면의 상태를 관찰하였다.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.05a
• /
• pp.279-280
• /
• 2018

The waterproofing material can be roughly divided into a coating material and a sheet waterproofing material. In the case of coating waterproofing materials, sheet waterproofing materials, which are easy to use in terms of workability and quality control, have been recently used because of their incomplete use of coating thickness, long curing time and poor blending due to in situ blending. However, in the case of the sheet waterproofing material, since the sheet overlapping portion is inevitably generated, various defects (breakage due to the behavior) are frequently observed. Therefore, it is imperative to establish fundamental measures to minimize this.

• Proceedings of the KIEE Conference
• /
• 1999.07e
• /
• pp.2311-2313
• /
• 1999

웨이블렛 기법은 비주기적 신호의 해석에 있어 새롭게 적용되고 있는 방법이다. 이 방법은 Fourier Transform(FT), the Fast Fourier Transform(FFT), Least Square Method 방법과는 달리 시간 -주파수 분석을 통해 비주기적 과도 신호의 감지와 특징 추출이 용이하다. 이에 본 연구에서는 이러한 통계적 기법과는 달리 부분 방전 발생 신호를 시간-주파수 영역에서 연속적으로 분석 가능한 웨이블렛 기법을 이용하여 시간에 따른 절연체의 열화를 해석 및 진단하기로 한다. 부분 방전 현상을 나타내는 데이터는 방대하므로 진단을 위해 해석 정보에서 특정한 특징을 추출하며 이를 바탕으로 체계화된 데이터 베이스를 구성하는 기반을 마련한다. 해석에 필요한 신호는 복합감지 시스템(부분방전 시스템, 음향방출 시스템)을 이용하여 수집하였다.