• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.3
• /
• pp.336-344
• /
• 2011

The purpose of this study is to analyze the radiation-pattern characteristics above 1 GHz for the electromagnetic wave radiated from multi-slot such as ventilations, etc. on the enclosure of an EUT and so to make recommendations for suitable test methods. An experimental EUT was formed by putting a comb-generator at the center of a rectangular enclosure with 4 slots, and its radiation pattern was analyzed in the frequency range of 1~6 GHz. As analysis results, multi-lobe appears above 2 GHz and the number of multi-lobes is growing as the frequency increases. And real radiated-emission measurements were performed for the experimental EUT by scanning a receiving antenna in the height of 1~4 m and tilting toward maximum radiation, as well as setting the height of a receiving antenna to the central position of the EUT which is prescribed at the present standards. The measured results are +12.8 dB in the scanning and +16.4 in the scanning and tilting compared with the present standard test method. Therefore, the latter must be revised in order to consider the radiation pattern above 1 GHz.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.8
• /
• pp.138-144
• /
• 2004

Satellite generates a complex electromagnetic noise by conducted and radiated coupling effect of the various electrical instruments. This noise may cause serious problems on the satellite system. To minimize the electromagnetic coupling effects and maintain the system safety margin, system noise reduction technique should be applied from the beginning of the system design. The KOMPSAT-2 system is evaluated by measuring the conducted noise on system electrical power leads and verifying a 6dB system safety margin under the complex noise environment with current injection. This paper describes the KOMPSAT-2 system evaluation result performed on ETB(Electrical Test Bed) and the analysed noise element, the analysed result will be reflected on FM(Flight Model) EMC test.

• Fire Science and Engineering
• /
• v.22 no.5
• /
• pp.72-78
• /
• 2008

The mass loss rate and heat release rate of EPS sandwich panel cores were analysed using variable external irradiation level. The experimental materials were exposed to incident heat fluxes form 20 to 50 kW/$m^2$. For the measurement of mass loss rate and heat release rate, the size of specimen was $100mm{\times}100mm{\times}50mm$ and the samples were 3 different kinds. The combustion heat were carried out from the Oxygen bomb calorimeter and the mass loss rate and heat release rate were carried out from the Mass loss calorimeter according to ISO 5660-1. As the results of this study, the mass loss rate of Type A, B, and C were 2.7 g/$m^2s$, 2.8 g/$m^2s$, and 2.3 g/$m^2s$ and the heat release rate of Type A, B, and C were 58.23 kW/$m^2$, 47.19 kW/$m^2$, and 50.06 kW/$m^2$ respectively at the heat flux of 50 kW/$m^2$. In conclusion, when the heat release characteristics applied to a classification system of Canada, Type A and C can be classified grade C-3, and Type C can be classified grade C-2 from all data of this study.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.10
• /
• pp.1184-1193
• /
• 2010

The upper frequency of international EMC regulations is being expanded above 1 GHz. Radiated emissions above 1 GHz are different from those below 1 GHz that is existing upper regulation frequency, and which have lower field strength and sharper and tilted beam-width, relatively. In this paper, an effective evaluation method to be used above 1 GHz is studied using an offset parabola antenna system having a double-ridged horn antenna as a feed. First, simple model is proposed for calculating antenna factor and field uniformity of the parabola antenna system, and then real radiated emission and radiated susceptibility measurements are performed using a constant noise emitter and the suggested antenna system. The results show that the proposed antenna system has higher gain and power efficiency, and wider field uniformity relative to a conventional double-ridged horn antenna. Therefore, it is confirmed that the proposed system can be effectively used for EMC measurements above 1 GHz.

• Fire Science and Engineering
• /
• v.18 no.2
• /
• pp.67-72
• /
• 2004

This study describes to assess combustion characteristics of fiber reinforced plastic (FRP) that is used an elements of building or structure in workplace. The combustion characteristics of the fiber reinforced plastic were carried out using by a Cone Calorimeter according to ISO 5660 standard. As the results of this study, the time to ignition and heat release rate of the fiber reinforced plastic was differ with heat flux of irradiance and content of flame retardant agent. The heat release rate of the fiber reinforced plastic was increased with increasing heat flux of irradiance. The flashover propensity of the fiber reinforced plastic using time to ignition and peak heat release rate was examined according to classification method by R.V. Petrella.

• Electric Engineers Magazine
• /
• v.237 no.5
• /
• pp.49-53
• /
• 2002

일반 사무용 빌딩에서는 타이프라이터, 복사기, 탕불기 등의 기기류가 공장에서는 기계, 장치류가 발열체로서 실내에 설치되어 있으며 이들의 기기류에 대한 연료 또는 전력에 의한 입력에너지는 모두 최종적으로 열에너지로 변환되어 방출되고 있다.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.5
• /
• pp.80-88
• /
• 2012

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.1
• /
• pp.66-74
• /
• 2013

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2004.05a
• /
• pp.229-234
• /
• 2004

조명기술의 발전에 따라 현대의 조명환경에는 다양한 종류의 광원이 사용되고, 박물관 등에서는 조명에 의한 다양한 연출 효과를 얻기 위해 같은 전시 공간 내에서도 여러 종류의 광원들을 사용한다. 광원마다 전시물에 유해한 성분의 복사비율이 다르고, 여러 성분의 복사에너지가 복합적으로 전시물에 입사되기 때문에 전시물의 관리에 많은 어려움이 따른다. 따라서 박물관에서 전시물의 손상이 어느 정도 일어날 수 있을지를 예측하고, 그에 대한 적절한 대책을 수립하는 등의 박물관 조명의 효과적인 실시를 위해서는, 전시물에 조사되는 광복사량 및 복사분포를 측정하고, 이를 바탕으로 적절한 조명의 형식과 누적조도로서 각 유물을 체계적으로 관리할 수 있는 유지관리 방안을 설정할 필요가 있다. 본 연구에서는 전시조명용으로 많이 사용되는 인공광원과 자연주광을 대상으로, 이들 광원들이 방출하는 복사조도와 자외선을 포함하는 광복사량, 광원의 분광분포 등을 측정하고 그 결과를 분석하였다.

• Publications of The Korean Astronomical Society
• /
• v.5 no.1
• /
• pp.40-64
• /
• 1990

복사전달식, 통계평형식 및 전하 입자 보존식을 동시에 만족시키는 비열평형상태의 대기에 대하여 그 방출원자스펙트럼을 수치계산하였다. 등온, 중압의 비열평형 태양홍염을 대상모델로 선정하였는데 여기에 적응한 제한조건중 복사전달에 관련된 편미분방정식은 3점 근사 차분법에 의해 정리하였고 홍염중심에 대칭성을 가정하여 경제조건을 부여하였으며 대기의 물리상태에 관련된 비선형 연립방정식의 해는 완전선형화 기법을 통한 퓨트리에 소거법을 이용해 구하였다.