• Title/Summary/Keyword: 보호복

Search Result 290, Processing Time 0.036 seconds

Study on the Thermal Protective Performance Measurements of Fire Fighter's Protective Clothing for Low Level Radiant Heat Exposures (저열유속 조건의 복사열 노출에 따른 소방보호복의 열보호성능 측정에 관한 연구)

  • Lee, Jun-Kyoung;Bang, Young-Jun;Bang, Chang-Hoon;Kwon, Jung-Suk
    • Fire Science and Engineering
    • /
    • v.28 no.2
    • /
    • pp.1-8
    • /
    • 2014
  • Despite advancements in the development of synthetic fibers and materials that provide better insulation, fire burn injuries remain a significant issue. To ensure adequate protection, clothing and equipment must be selected on the basis of performance. There are different standards like ISO standards applicable to each of the various types of clothing used by fire fighters. But, in most cases, the tests are performed in the conditions of high heat flux exposure, the clothing material can be destroyed easily. Thus the effective way to investigate the protective performance for the low (radiant) heat flux conditions should be needed. Therefore improved RPP (Radiant Protective Performance) test method based on the onset of pain burn injury was suggested. Experiments were performed to verify the proposed method with current protective clothing for fire fighters and the transient heat transfer characteristics were identified, also. Moreover, several protective performance indices were acquired from experimental results to analyze their relations.

복사열 노출에 따른 소방보호복의 열보호성능 측정

  • Bang, Yeong-Jun;Lee, Jun-Gyeong;Bang, Chang-Hun;Gwon, Jeong-Suk
    • Proceedings of the Korea Institute of Fire Science and Engineering Conference
    • /
    • 2013.04a
    • /
    • pp.78-79
    • /
    • 2013
  • 소방보호복은 화재진압현장에서 소방관들을 화상 위험으로부터 보호하기 위해 가장 많이 착용하는 장비이다. 소방보호복의 열보호 특성을 정확히 파악하고 있어야 소방관들의 화재진압작업시 위험요소를 적절히 판단하여 화상 사고 등을 예방할 수 있다. 따라서 본 연구는 복사열 노출에 따른 소방보호복의 열보호 성능을 정확히 측정 및 분석하기 위해 실험 장비를 제작하고 실험을 수행하였다. 소방 보호복의 구성 재료 각각에 대해 복사열 노출을 시켜 시간에 따른 피복 전후면의 온도차와 통과 열유속을 측정하여 소방 보호복의 열보호 성능 특성을 살펴보았다.

  • PDF

Analysis of Pattern Shape and Types for Non-woven Protective Coverall on Domestic Market (시판 부직포 전신 보호복의 패턴형상 및 유형분석)

  • Moon, Jeehyun;Jeon, Eunkyung
    • Journal of the Korean Society of Clothing and Textiles
    • /
    • v.40 no.2
    • /
    • pp.273-286
    • /
    • 2016
  • Protective coveralls are very uncomfortable to work in comparison to ordinary top and bottom separated clothing. A pattern maker has to consider the size of the human body and human motion range when designing protective coverall patterns. It is difficult to produce well-fitted coveralls because of the lack of readymade patterns despite the increased need for protective coveralls at various jobs. Patterns are decomposed by unsewing 18 products in the domestic market to provide the fundamental information on developing patterns for protective coveralls. The characteristics and differences of pattern types are compared after grouping patterns with information taken from the analysis of the shapes and measurements of patterns from the acquired patterns. The results of the analysis showed that on-market protective coveralls were less curved but much linear when compared to ordinary clothing patterns; however, the breasts and crotch circumferences were very loose and bulky, which is quite different from the other all-in one style working clothes. For the pattern shapes, patterns are classified into waistline-seamed and bustline-seamed types. The result of the hierarchical cluster analysis with 27 measurement variables were classified into four groups. Types by shape and measurements were related to each other; therefore, we expect the information of each type to be used in developing protective clothing patterns.

공기간극이 소방보호복의 열보호성능에 미치는 영향

  • Bang, Yeong-Jun;Lee, Jun-Gyeong;Sin, Hwan-Jun;Lee, Gwan-Geun;Yun, Chang-Sik;Bang, Chang-Hun;Gwon, Jeong-Suk
    • Proceedings of the Korea Institute of Fire Science and Engineering Conference
    • /
    • 2013.11a
    • /
    • pp.57-58
    • /
    • 2013
  • 소방보호복은 고열유속에 의한 화상방지를 위해 3층 이상의 복합소재로 구성되어 있으며, 각 소재 사이는 공기 간극이 존재한다. 화재에 의한 고열유속 노출 시 공기 간극 내에서의 열전달은 대류와 복사에 의해 주로 발생하며, 그로 인해 간극의 크기에 따라서 비선형 특징의 열 저항 크기를 갖게 된다. 그러므로 본 연구에서는 보호복 소재 사이의 여러 가지 공기 간극에 대한 보호복의 열 보호성능을 자세히 파악하기 위한 실험을 수행하였다.

  • PDF

A Study on Wearing Conditions and Dissatisfaction With Current Motorcycle Wear in Korea -Focus on Men′s Motorcycle Jacket- (국내 모터사이클복의 착용실태 및 불만족도에 관한 연구 -남성용 모터사이클 쟈켓을 중심으로-)

  • Hei-Sun;Do, Wol-Hee
    • Journal of the Korean Society of Clothing and Textiles
    • /
    • v.26 no.12
    • /
    • pp.1765-1777
    • /
    • 2002
  • 본 연구에서는 현재 국내의 서울시내에 거주하는 모터사이클을 타는 만20세 이상의 남성을 대상으로 모터사이클복에 대한 착용실태와 불만사항들을 조사하고 이를 연령별, 모터사이클 유형별로 비교 분석하여 착용감 및 안전성이 향상된 모터사이클복 개발을 위한 기초자료를 제시 하고자 하였다. 설문조사는 2002년 1월~3월까지 3개월간 총 400부를 배부한 후 회수하고, 이 중 262부를 분석자료로 사용하여 빈도 및 백분율, 평균 등의 기술 통계치를 얻어 전반적인 착용현황을 알아보고, 교차분석을 실시한 후 X$^2$-검증을 실시하여 연령별, 모터사이클 유형별, 운행경력 별로 통계적인 차이를 비교 분석하였다. 1. 모터사이클복의 착용실태 및 불만사항 전반에 관한 조사결과, 조사대상자는 20대~40대의 운행경력은 5년 이상인 전문 라이더들이 많았으며 모터사이클의 배기량은 400cc이상이 가장 높게 나타났고, 모터사이클 유형은 로드 바이크가 가장 높게 나타났고, 이용목적은 레져.취미용, 선호하는 모터사이클복 아이템별 소재는 원피스와 슬랙스의 경우에는 피혁소재가 쟈켓의 경우에는 텍스타일 소재가 높게 나타났다. 아이템별 소유는 쟈켓과 투피스가 높게 나타났고, 보호구가 필요하다고 생각되는 신체부위는 상의에서는 가슴과 팔꿈치, 하의에서는 무릎으로 나타났으며, 무릎보호대의 소유도가 가장 높게 나타났다. 모터사이클복 주된 착용목적은 '부상방지', 모터사이클복을 착용하지 않는 이유는 '움직이기가 불편해서' '가격이 비싸서' '여름철에 더워서'가 각각 높게 나타났다. 모터사이클복에 대한 불만족도에서 동작적합성과 사이즈에 대한 불만도가 높게 나타났고, 모터사이클복소재 및 내부 장착 보호장구의 경량화가 요구되었으며, 모터사이클 쟈켓의 치수부적합부위는 소매길이가 가장높게 나타났다. 2. 전체 응답자의 연령을 20대, 30대, 40대 이상으로 나누어 연령별 차이를 비교한 결과 각각의 문항에 대해서 모두 연령대별로 유의차가 인정되었다. 3. 모터사이클복 아이템별 선호소재 문항에서 원피스와 쟈켓에서 모터사이클 기종별 유의차가 나타났는데, 비즈니스 기종에 서는 텍스타일 소재를, 아메리칸크루져 기종에서는 피혁소재를 선호하였다. 로드바이크와 오프로드 기종에서는 원피스는 피혁소재를 선호하였고, 쟈켓은 텍스타일 소재를 선호하는 것으로 나타났다.

디지털 보호계통 기술 개발

  • 한재복;김창회
    • 전기의세계
    • /
    • v.52 no.9
    • /
    • pp.41-46
    • /
    • 2003
  • 원전의 보호계통은 발전소의 비정상 운전시 원자로를 보호하고, 관련 기기를 작동시켜 사고를 완화시키는 기능을 수행한다. 따라서, 보호계통은 안전등급으로 분류되고, 안전기준에 따라 개발되어야 한다. 본 기고에서는 우리나라를 비롯한 원자력선진국의 보호계통 개발동향을 기술한다. 또한, 원전 계측제어계통 개발 사업을 통해 개발되고 있는 보호계통과 안전등급 PLC(Programmable Logic Controller)에 대한 설계특징과 그 구성에 대해 논의한다.

  • PDF

Base Pattern Development of Protective Clothing - Focusing on Protective Clothing for Riot Policewomen - (보호복 상의 베이스 패턴 개발 - 여경보호복을 중심으로 -)

  • Kim, Hyo-Sook;Kim, Ji-Hyeon
    • Journal of the Korea Fashion and Costume Design Association
    • /
    • v.17 no.3
    • /
    • pp.207-224
    • /
    • 2015
  • Protective clothing for riot policewomen is worn by policewomen to protect their body at suppressing a riot. Plastic guards of Nylon 66 material are attached to the base of E.V.A. Foam material. Protective clothing for riot policewomen consists of a jacket, guards for arms and legs, upper arm braces, and thigh pads. This study was aimed to develop the base pattern of the jacket to protect the torso and to improve the body suitability and the adaptability to movements of protective clothing for riot policewomen. Since current protective clothing worn by riot policewomen is manufactured with the same design of protective clothing for riot policemen, the body suitability and the adaptability to movements are not very satisfactory for policewomen who has different body structure than from riot policemen. Therefore, the purpose of this study is to reflect the body size and characteristics of riot policewomen and develop the base pattern of protective clothing with better body suitability and adaptability to movements. In this respect, amount and place of dots on the jacket were differently designed, made and evaluated by fitting test. The base with the best evaluation was selected as the final experiment clothing to demonstrate its superiority compared with the existing protective clothing.

  • PDF