• Proceedings of the KSR Conference
• /
• 2002.10a
• /
• pp.522-527
• /
• 2002

This paper proposes 40 [KVA] rated SW(Static Inverter) system for Light Rail Transit. The SIV provide power of a fluorescent light in the car, Air-conditioner, and other equipments. To control output voltage it is used voltage control loop for constant voltage control and simultaneously used current control loop for instantaneous control at load changing. The performance of SW system will be verified by experimental results.

• Proceedings of the KIEE Conference
• /
• 1999.07a
• /
• pp.433-435
• /
• 1999

전동차의 구동시스템 및 보조 전원장치 등의 제어가 고성능화되고 복잡해지면서 각 기기의 개별 시험이 아닌 조합시험을 통한 신뢰성의 확보가 점점 중요해지고 있다. 특히 구동시스템의 시험을 위해서는 실제 차량부하와 유사한 부하 특성을 조합시험장치가 제공하는 것이 중요하다. 전동차의 부하특성에서 가장 지배적인 역할을 하는 특성은 관성이다. 국내에 운용중인 조합시험장치들은 전동차의 직선 운동에 해당하는 등가 회전관성을 가지는 플라이휠(flywheel)을 이용하여 관성부하를 구현하고 있다. 본 논문에서는 이러한 관성부하를 기계적 질량이 아닌 서보시스템을 이용하여 구현할 경우의 장단점과 특성에 대해 알아보고, 그 적절한 구현방법을 제안하고자 한다. 또한 실험 및 실험 결과를 통해 그 타당성을 검증하고자 한다.

• Proceedings of the KIEE Conference
• /
• 2008.04b
• /
• pp.179-181
• /
• 2008

In this study, the dynamic characteristic of a contact wire and pantograph suppling electrical power to high-speed trains are investigated. The analysis of the loss of contact based on Power Simulator program software is performed to develop power line disturbance model suitable for high speed operation. It is confirmed that a contact wire and pantograph model are necessary for studying the dynamic behavior of the pantograph system.

• Proceedings of the KIPE Conference
• /
• 2013.07a
• /
• pp.307-308
• /
• 2013

기존 LED(Light Emitting Diode) 백라이트 LCD(Liquid Crystal Display) TV 용 전원 장치는 다중출력 플라이백 컨버터를 사용하여 로직 보드, 영상 보드, LED 백라이트 등의 구동에 필요한 다양한 전원들을 생성, 공급한다. 특히, 기존에는 LED 백라이트의 구동을 위한 출력단에는 부스트 컨버터를 추가하여 LED 전류를 제어하였다. 따라서, 부스트 컨버터에 의한 부피 및 원가가 증가하는 단점이 있었다. 본 논문에서는 부스트 컨버터 없이 보조 스위치 하나만을 사용한 LED 구동회로를 이용하여 LED의 정전류 제어가 가능한 저 가격형 LED 구동회로의 비동기식 제어방법을 제안한다. 최종적으로 제안 회로를 32인치 LCD TV 용 LED 백라이트에 적용하여 그 실험 결과를 바탕으로 제안 회로의 타당성을 검증하였다.

• Proceedings of the KSR Conference
• /
• 2003.05a
• /
• pp.548-553
• /
• 2003

Battery supplies Each Electric device in Railway vehicles with Control Power. When Battery is overchargedjustly, the battery voltage is not satisfied with the minimum operating voltage, CVCF Inverter(SIV) is supplied with external Power supply or the other railway vehicles and start up CVCF Inverter. In this paper to improve this problem, Dead battery Starter system is proposed. When the battery voltage is not satisfied with the minimum value.turn on the Dead Battery Starter switch, and the Dead Battery Starter supplies the control power to the SIV controller from the line voltage. With this Dead Battery Starter system, the train can be operated when the battery is not proper status. Dead Battery Starter is designed by ROTEM and will be delivered to Attiko Metro Series 2.

• Proceedings of the KIPE Conference
• /
• 2014.07a
• /
• pp.161-162
• /
• 2014

본 논문에서는 스탠바이 컨버터를 가지는 전력 변환 시스템에서 경부하 효율을 높일 수 있는 새로운 게이트 구동기법을 제안한다. 제안 방법은 스탠바이 컨버터의 보조 출력 전압을 조절하여 전력 MOSFET의 구동 전압 및 제어기 IC의 동작 전압을 경부하 조건에서 낮춘다. 따라서, MOSFET의 게이트 구동 손실과 제어기 IC의 손실을 크게 줄일 수 있다. 본 논문에서는 48V 입력전압 및 12V 출력전압/60A 출력전류의 주전원단 및 5V/3A의 출력의 스탠바이 전원단을 포함한 DC/DC 서버용 전원 장치를 실험하여 타당성을 검증하였다.

• Journal of the Korean Society for Railway
• /
• v.9 no.5 s.36
• /
• pp.612-617
• /
• 2006

As the on-board electric devices determine the performances of vehicles, production of reliable devices is important. To keep the reliability of devices constant, management of performance evaluation of the on-board devices is crucial. Because temperature has a serious effect on failures of the components of the devices, its measurement is the first step for good management. In this study, we described performance characteristics of domestic auxiliary block developed through G7 project. We measured the performances of auxiliary block during test running by the developed on-line measurement system. After we save the input real-time data from each signal of Korean High Speed Train through the network line, we can acquire necessary information through post-processing program. We verify the motor block characteristics of Korean High Speed Train by this system.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.4 no.4
• /
• pp.349-356
• /
• 1999

This paper presents an instantaneous voltage control scheme of au킹liary power supply system for the electric railway v vehicles, The resonance problem of the LC filter and the existing steady state error are more serious as the use of l instantaneous voltage control techniques for the fast transient response at the nonlinear load, A filter capacitor current f feedback loop is considered to increase the damping ratio of the voltage transfer function for the suppression of the resonance problem of the LC inverter output filter. To eliminate the steady state en‘or existing in case of the AC l instantaneous voltage control. the high gain transfer function is added to the conventional PI controller. The theoretical a analysis is well described with the simulation results. The validity of the proposed schemes is well verified through the s simulation and expelimental results for the 5 kVA prototype.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.8
• /
• pp.791-796
• /
• 2012

Small gas turbine engines are used in aircraft as an auxiliary power unit (APU) to supply compressed air to start the main engine and for emergency electricity. When an aircraft is operating in an environment in which sand and dust is present in the ambient air, the engines as well as the APU ingest the sand and dust. This causes erosion of the engine and a degradation in its performance. The present study investigated the effect of sand and dust ingestion on small gas turbine engines. The concentration of sand and dust was $4.4{\times}10^{-5}kg$ per unit kg of air, which follows the specification in MIL-E-8593. The test was conducted for 10 h, and the engine performance before and after the test was compared. In addition, a tear-down inspection was conducted to examine the erosion patterns of sub-components such as the impeller and turbine wheel.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.6
• /
• pp.26-33
• /
• 2008

This paper presents a new full-bridge soft switching PWM DC-DC converter circuit topology that adding one switcher, one lossless snubber quasi-resonance capacity to power source for general welding machine This full-bridge soft switching DC-DC convoter· topology can applicable 600[V] switching device (IGBT)incase of AC 400[V] common power source because the voltage of active switcher is 1/2 of DC bus line voltage. And low voltage hight current out)ut that first coil current is smaller than second coil current in high frequency transformer can be obtained with decreasing path loss in conventional DC bus line switcher. As it operate ZCS/ZVS in full range, high frequency, high efficiency and high output are implemented at low voltage and high DC current switching power supplies. All of this items are got from simulation and the result of experiment. If make up for the weak points of this proposed circuit, it will be used more easily for next generation TIG, MIG and MAG type of arc-welding machine.