• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1995.09a
• /
• pp.363-369
• /
• 1995

본 연구에서는 선형계획법 프로그램의 수치오차보정과 행렬희소도 유지를 통하여 수행 속도를 향상시키는 방안에 대해 다룬다. 수치오차를 줄이기 위 해 규모화를 도입하였으며, 계산 과정에서의 상하삼각행렬의 수치오차를 근 사적으로 측정하는 방법을 고려하였다. 기저행렬의 상하분해에 널리 사용되 는 Markowitz 순서화의 효율적인 구현에 대해 연구하였으며, Reid의 기저수 정방법의 효율성에 대해 실험적으로 검토하였다. 또, 행렬의 희소도에 의한 재역산 기준을 수립하여 수행 속도를 개선하였다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.4
• /
• pp.372-382
• /
• 2009

A GNSS software for processing the SBAS correction data is developed, and Japan MSAS correction data is analyzed. MSAS orbit correction data is analyzed and compared with WAAS data. MSAS ionosphere correction data is analyzed and the effect of the equatorial anomaly on the correction accuracy is discussed. Degradation due to receive delay of correction information and effect of the degradation on protection level analyzed using partial remove of MSAS correction information. Integrity and availability for precision approch using the MSAS system analyzed.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.6
• /
• pp.1542-1551
• /
• 1990

This paper shown how to measure the machining error in diameter of cylindrical workpiece and compensate the measured machining error in NC turning. Machining error is measured by the electric micrometer mounted on the tool post with the NC part program for probe location path analyzed. Correct NC part program for finish turning is automatically generated to compensate the measured machining error. These concepts have been effectively introduced to a newly developed software for error compensation. In turning experiments with the developed error compensation system, machining error was almost within the specified tolerance, which reveals the effectiveness of the developed system.

• Korean Journal of Optics and Photonics
• /
• v.16 no.2
• /
• pp.128-132
• /
• 2005

Most CGH programs use a model equation based on the diffraction angle. Therefore, if the diffraction angle is large enough, the image on a flat screen is distorted. To correct the distortion, we created the model equation from diffraction theory and verified it through experiment. We also suggest a design method that compensates for the distortion without changing the CGH program.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.26 no.2
• /
• pp.103-110
• /
• 2008

General lens, widely using in Photogrammetry, has narrow view, and have to adjust "Image-Registration Method" after obtain images and it need cost; economic, period of time. Recent days, there is various study that use wide-angle lens, usually for robotics field, put to practical use in photogrammetry instead of general lens. In this studies, distortion tendency of wide-angle lens and utilize the correction techniques suitable to wide-angle lens by the existing photographic survey methods. After carrying out the calibration of the wide-angle lens, we calculated the correction parameters, and then developed the method that convert the original image-point to new image-point correcting distortion. For authorization the developed algorithm, we had inspection about shape and position; there are approximately 2D RMSE of 3 pixel, cx = 2, and cy = 3 different.

• The Bulletin of The Korean Astronomical Society
• /
• v.41 no.2
• /
• pp.36.3-37
• /
• 2016

ECS(Error Compensation Software)는 알루미늄 자유곡면 반사경의 형상정밀도를 향상시키기 위해 개발된 보정가공 소프트웨어이다. DTM(Diamond Turning Machine)을 이용한 가공공정에서 가공오차의 변화를 쉽게 확인하며 형상을 보정할 수 있도록 설계되었다. 보정가공 공정은 (1) 10차 다항식을 이용하여 표면을 설계한 후 DTM에 입력할 가공경로 계산, (2) DTM에 가공경로를 입력하여 가공, (3) 3차원 초정밀 형상측정 장비로 반사경의 가공오차 분석, (4) 가공오차를 보정하여 새로운 10차 다항식 설계, (5) 보정가공경로 계산 후 재가공으로 이루어진다. 그동안의 공정은 다항식의 설계, 가공경로 계산, 반사경의 가공오차 분석을 위해 다수의 프로그램들을 실행해야만 했다. 본 연구에서는 ECS가 알루미늄 자유곡면 반사경 제작을 위한 통합 보정가공 소프트웨어를 제공하여, 사용자가 작업을 효율적으로 수행하기를 기대한다.

• Geophysics and Geophysical Exploration
• /
• v.25 no.3
• /
• pp.109-119
• /
• 2022

The computational efficiency of reverse time migration (RTM) based on numerical modeling is not secured due to the high-frequency band of several hundred Hz or higher for data acquired through a three-dimensional (3D) ultra-high-resolution (UHR) seismic survey. Therefore, this study develops an RTM program to derive high-quality 3D geological structures using UHR seismic data. In the traditional 3D RTM program, an excitation amplitude technique that stores only the maximum amplitude of the source wavefield and a domain-limiting technique that minimizes the modeling area where the source and receivers are located were used to significantly reduce memory usage and calculation time. The program developed through this study successfully derived a 3D migration image with a horizontal grid size of 1 m for the 3D UHR seismic survey data obtained from the Korea Institute of Geoscience and Mineral Resources in 2019, and geological analysis was conducted.

• Journal of the Korean earth science society
• /
• v.28 no.7
• /
• pp.825-837
• /
• 2007

The researchers compiled two sets of digital terrain data released by NORI (National Oceanographic Research Institute, Korea) and NIMA (National Imagery and Mapping Agency, USA) respectively and analyzed a new set of $3"{\times}3"$ gridded terrain data in order to calculate terrain correction value in gravity in and around the Korean Peninsula. Using this new set of terrain data, the researchers developed an effective algorithm to calculate precise terrain correction value in gravity considering Earth's curvature and coded a fortran program to evaluate terrain correction value covering the surface of which the radius reaches up to 166.735 km. The researchers also calculated terrain correction value over the southern part of Korea. According to the statistics of terrain correction value calculated in and around the Korean Peninsula up to 166.735 km of surface radius, the maximum value soars to 56.508 mGal and the mean value is 4.539 mGal.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2002.04b
• /
• pp.1273-1276
• /
• 2002

기존 RTK-GPS는 고가의 장비인 RF방식의 무선모뎀을 사용함으로써 무선국의 허가, 전파의 지리적 장애물에 의한 영향, 전송거리의 제한, 주파수 혼신, 주파수 자원의 유한성 등의 문제점이 있다. 본 논문에서는 이러한 문제점을 해결하기 위해 휴대전화를 전송 매체로 이용하여 보정 데이터를 송 수신하는 방법으로, PDA 환경하에서 RTK-GPS 보정 데이터를 전송하는 시스템을 설계 및 구현하였다. 기준국의 서버는 GPS 수신기와 연결된 RS-232 시리얼 포트로부터 보정 데이터를 수신하여 휴대전화와 연동을 통한 이동국의 PDA 단말기로 보정 데이터를 전송하고, RS-232 시리얼 포트를 통해 이동국의 GPS수신기에 전달한다. 이동국의 측위프로그램은 GPS수신기로부터 RSC-232 시리얼 포트를 통한 위치 정보를 수신하여 상대측위를 하게되며, 정확한 위치 측정이 이루어진다.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.30 no.1
• /
• pp.97-107
• /
• 2024

Despite the rapid advancement in image recognition technology, achieving perfect digitization of tabular documents and handwritten documents still challenges. The purpose of this study is to improve the accuracy of digitizing the logbook by correcting errors by utilizing associated rules considered during logbook entries. Through this, it is expected to enhance the accuracy and reliability of data extracted from logbook through OCR programs. This model is to improve the accuracy of digitizing the logbook of the training ship "Saenuri" at the Mokpo Maritime University by correcting errors identified after Optical Character Recognition (OCR) program recognition. The model identified and corrected errors by utilizing associated rules considered during logbook entries. To evaluate the effect of model, the data before and after correction were divided by features, and comparisons were made between the same sailing number and the same feature. Using this model, approximately 10.6% of errors out of the total estimated error rate of about 11.8% were identified, and 56 out of 123 errors were corrected. A limitation of this study is that it only focuses on information from Dist.Run to Stand Course sections of the logbook, which contain navigational information. Future research will aim to correct more information from the logbook, including weather information, to overcome this limitation.