• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.20 no.3
• /
• pp.283-291
• /
• 2002

Since GPS's SA cancellation, the interest is converged in correction of errors such as atmospheric delay and multipath that weight had been small relatively, which can improve the accuracy of positioning through modelling research. The aim of this study have an extensive comparison of the various tropospheric delay models (Goad&Goodman, A&K, Hopfield and Sasstamoinen) and mapping functions(Niell, Chao, and Marini). Expecially, the tropospheric delay amounts by change of the GPS satellite elevations, and the delay by various combination between zenith delay models and mapping functions, compared and examined. For this, programmed the total delay models and the combined models which can be described as a product of the delay at the zenith and a mapping function. The result of study, especially, as the minimum elevation of included data is reduced under $10^{\circ}$, it was considered to be reasonable that the prediction of tropospheric delay considering combination and mapping character of functions about the transition of the zenith delay to a delay with arbitrary zenith angle.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.234-234
• /
• 2016

본 연구에서는 기상청 RCM으로부터 생산된 미래 이슬점자료를 이용하여 편의보정 및 시간적인 규모내림방법의 적용에 있어서 그동안 간과하고 있었던 사항들을 살펴보고, 그러한 부분들에 대한 보완방법을 100년 빈도 12-시간 지속 이슬점 산출과정을 대상으로 제안하고자 한다. 우선 기후모델로부터 도출된 자료와, 관측된 자료 사이의 일치성 여부를 먼저 확인하기 위해 기후모델로부터 도출된 자료를 이용하여 과거 관측자료와의 재현성을 평가한다. 또한 기후모델의 여러 가지 한계로 인해 생기는 불일치성을 극복하기 위해 편의보정이라는 절차를 수행하여 모델로 부터 도출된 미래 기후자료를 보정하게 된다.본 연구의 경우 5월부터 10월까지의 자료를 대상으로 매월 1-15일 시기와 16-말일로 나누어 총 12개의 시기별, 지점별(62개 지점)별로 편의보정을 수행하였다. 또한 편의보정 되어진 이슬점 자료를 바탕으로 scale-invariance 기법을 적용하여 일-단위 이슬점자료로부터 시간-단위 이슬점 정보를 추출하였다. 먼저 62개 지점별로 1981-1997년(보정기간) 17년 동안의 과거관측자료를 이용하여 시기별 일 이슬점자료로부터 시기별 12-시간 지속 100년 빈도 이슬점을 산출하는 함수관계를 구축한 후 이를 이용하여 1998-2014년(검증기간) 17년 동안의 시기별 일 이슬점 자료로부터 시기별 12-시간 지속 100년 빈도 이슬점을 산출하여, 실제 검증기간의 시간자료를 이용한 12-시간 지속 100년 빈도 이슬점과 비교해 보았다.

• Journal of Advanced Navigation Technology
• /
• v.24 no.3
• /
• pp.198-204
• /
• 2020

This paper designs a electromagnetic-log (EM-Log) aided navigation filter for maritime environment without global navigation satellite system (GNSS). When navigation is performed for a long time, Inertial navigation system (INS)'s error gradually diverges. Therefore, an integrated navigation method is used to solve this problem. EM-Log sensor measures the velocity of the vehicle. However, since the measured velocity from EM-Log contains the speed of the sea current, the aided navigation filter is required to estimate the sea current. This paper proposes a single model filter and interacting multiple (IMM) model filter methods to estimate the sea current and analyzes the influence of the sea current model on the filter. The performance of the designed aided navigation filter is verified using a simulation and the improvement rate of the filter compared to the pure navigation is analyzed. The performance of single model filter is improved when the sea current model is correct. However, when the sea current model is incorrect, the performance decreases. On the other hands, IMM model filter methods show the stable performance compared to the single model.

• Journal of Advanced Navigation Technology
• /
• v.20 no.1
• /
• pp.23-28
• /
• 2016

In this paper, we verified accuracy of the satellite based augmentation system (SBAS) tropospheric delay correction model for the Korean region. We employed the precise data of the tropospheric zenith path delay (ZPD) which is provided by the international GNSS service (IGS). In addition, we compared the verification results with that of the Saastamoinen model and the Hopfield model. Consequently, the bias residual error of the SBAS tropospheric delay correction model is about 50 mm, whereas the Saastamoinen model and the Hopfield model are more accurate. This residual error by the tropospheric delay model can affect the SBAS user position accuracy, but there is no problem in SBAS accuracy requirement. If we modified the meteorological parameters for SBAS tropospheric model to appropriate in Korean weather environment, we can provide better SBAS service to the Korean user.

• Journal of Digital Convergence
• /
• v.10 no.8
• /
• pp.173-178
• /
• 2012

In the generated model for the recognition vocabulary, tri-phones which is not make preparations are produced. Therefore this model does not generate an initial estimate of parameter words, and the system can not configure the model appear as disadvantages. As a result, the sophistication of the Gaussian model is fall will degrade recognition. In this system, we propose the error correction system using out-of vocabulary rejection algorithm. When the systems are creating a vocabulary recognition model, recognition rates are improved to refuse the vocabulary which is not registered. In addition, this system is seized the lexical analysis and meaning using probability distributions, and this system deactivates the string before phoneme change was applied. System analysis determine the rate of error correction using phoneme similarity rate and reliability, system performance comparison as a result of error correction rate improve represent 2.8% by method using error patterns, fault patterns, meaning patterns.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.12
• /
• pp.1923-1932
• /
• 2013

In order to solve the problem of severely distorted images from a wide-angle camera, we propose a calibration method which corrects a radial distortion in wide-angle images by estimation and validation of camera model. First, we estimate a camera model consisting of intrinsic and extrinsic parameters from calibration patterns, where intrinsic parameters are the focal length, the principal point and so on, and extrinsic parameters are the relative position and orientation of calibration pattern from a camera. Next we validate the estimated camera model by re-extracting corner points by inversing the model to images. Finally we correct the distortion of the image using the validated camera model. We confirm that the proposed method can correct the distortion more than 80% by the calibration experiments using the lattice shaped pattern images captured from a general web camera and a wide-angle camera.

• The Journal of the Korea Contents Association
• /
• v.6 no.6
• /
• pp.1-8
• /
• 2006

This paper presents an intelligent pattern matching method that can be used to acquire the reliable calibration data for automatic PCB pattern inspection. The inaccurate calibration data is often acquired by geometric pattern variations and selecting an inappropriate model manual. It makes low the confidence of inspection and also the inspection processing time has been delayed. In this paper, the geometric features of PCB patterns are utilized to calculate the accurate calibration data. An appropriate model is selected automatically based on the geometric features, and then the calibration data to be invariant to the geometric variations(translation, rotation, scaling) is calculated. The method can save the inspection time unnecessary by eliminating the need for manual model selection. As the result, it makes a fast, accurate and reliable inspection of PCB patterns.

• Journal of the KSME
• /
• v.54 no.2
• /
• pp.52-57
• /
• 2014

이 글에서는 컴퓨터 이용 공학(CAE : Computer Aided Engineering) 기술이 발달함에 따라 갈수록 중요해지는 통계적 모델 검증 및 보정(Statistical Model Validation and Calibration)을 수행하는 데 필요한 통계적인 기법들을 각 단계별로 상세하게 소개하고, 실제 제품 개발에 적용하는 데 있어서 예상되는 어려움과 향후 연구방향을 제시하고자 한다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.34 no.2
• /
• pp.85-91
• /
• 2021

This paper introduces a modified Karagozian & Case concrete model (K&C model) for the numerical analysis of a steel-fiber-reinforced concrete (SFRC) structure subjected to projectile impact. The original K&C model was calibrated to consider the effects of steel fibers accurately by modifying the strength surfaces and input parameters. Single element tests were then conducted and compared with uniaxial and triaxial compressive data to verify the modified model. With the application of a dynamic increase factor, the finite element model of the SFRC structure subjected to projectile impact was constructed. Thereafter, the applicability of the modified material model was examined by comparisons with the experimental results.

• Journal of Korea Water Resources Association
• /
• v.50 no.8
• /
• pp.551-562
• /
• 2017

In order to utilize 6-month precipitation forecasts (6 months at maximum) of Global Seasonal Forecast System version 5 (GloSea5), which is being provided by KMA (Korea Meteorological Administration) since 2014, for water resources management as well as other applications, it is needed to correct the forecast model's quantitative bias against observations. This study evaluated applicability of bias-correction skill in GloSea5 and selected an optimal method among 11 techniques that include probabilistic distribution type based, parametric, and non-parametric bias-correction to fix GloSea5's bias in precipitation forecasts. Non-parametric bias-correction provided the most similar results with observed data compared to other techniques in hindcast for the past events, yet relatively generated some discrepancies in forecast. On the contrary, parametric bias-correction produced the most reliable results in both hindcast and forecast periods. The results of this study are expected to be applicable to various applications using seasonal forecast model such as water resources operation and management, hydropower, agriculture, etc.