• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.12 no.2
• /
• pp.173-180
• /
• 1994

One can see more and more photograrmmetric applications dealing with the extraction of information from images obtained with CCD (Charge Coupled Device) camera scanners. In order for this information to be useful, the scanning errors of scanners must be known through a calibration. Investigation of this study is given to the detailed procedure of the correction for scanning errors created during the scanning of photographs with CCD camera scanner using the three kinds of high resolution reseal plates prepared. The geometric corrected digital images for scanning errors were generated and the accuracy of the resulting new images for each types of plates were checked comparing its image coordinates with there corresponding ground coordinates for the check points.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.32 no.5
• /
• pp.539-550
• /
• 2014

High resolution satellite images have to be oriented and geometrically processed from GCPs(Ground Control Points) to generate precise DEMs(Digital Elevation Models) and topographic maps. In Korea, thousands of national UCPS(Unified Control Points) are established and distributed all over the country by the Korean NGII(National Geographic Information Institute). For that reason, UCPs can be easily searched and downloaded by the national-control-point-record-issues system. Following the study, we suggested the sky-view and road-view from web-portals for searching and identifying UCPs on the images. To evaluate the usefulness of UCPs in RPCs(rational polynomial coefficients) adjustment of the high resolution satellite images, the one UCP, which of using simple the control point, has been applied to adjust the vendor-provided RPCs of the KOMPSAT-3 images. As a result, the positioning error of corrected RPCs was approximately one pixel and one meter. From this experiment, we conclude that the UCPs will be able to replace the survey GCPs for mapping with the satellite images or aerial images.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.7 no.2
• /
• pp.45-51
• /
• 1989

Lens distortion would produce image displacement, therefore correction of lens distortion is required urgently to improve accuracy of results in photogrammetry. The objective of this study is to find out lens distortion coefficients versus focussing distance on non-metric and metric camera and to investigate propriety of application of lens distortion coefficients to three dimensional analysis. Analytical plumb line method which needs not perform control survey and space resection and requires only one photograph was used in order to get lens distortion coefficients. As the result of this study, the coefficients of radial and tangential distortion change as focussing distance changes, and consequently it is reasonable to apply the eigenvalues of lens distortion coefficients according to focussing distance. When these coefficients were applied to actual measurement, standard errors decreased about 30% or 76% remarkably.

• Korean Journal of Remote Sensing
• /
• v.24 no.4
• /
• pp.299-307
• /
• 2008

It is possible to extract qualified ground control points (GCPs) from SAR data itself without published maps. TerraSAR-X data that are one of highest spatial resolution among civilian SAR systems is now available. In this study, a sophisticated method for GCP extraction from TerraSAR-X data was tested and the quality of the extracted GCPs was evaluated. Mean values of the distance errors were 0.11m and -3.96 m with standard deviations of 6.52 m and 5.11 m in easting and northing, respectively. The result is one of the best among GCPs possibly extracted from any civilian remote sensing systems. The extracted GCPs were used for geo-rectification of IKONOS image. The method used in this study can be applied to KOMPSAT-5 for geo-rectification of high-resolution optic images acquired by KOMPSAT-2 or follow-up missions.

• Journal of Korean Society for Geospatial Information Science
• /
• v.23 no.2
• /
• pp.97-104
• /
• 2015

Due to the introduction of various IT devices, including the recently smartphones and the widespread use of the car navigation system to the location-based information service space has been increased. Spatial information users have been requiring higher levels of quality. In this paper, we study how to build accurate three-dimensional space information by integrating MMS(Moblie Mapping System) survey and airborne survey data. Thus, to analyze the tendency of deviation between the MMS survey and airborne survey data observed in the experimental region, the deviation tendency of the data, it was confirmed that was not consistent. Deviation correction model to select how to change the georeferencing information directly contained in the GPS/INS processing results for the determination, classifies the standard is a method for acquiring the correction reference point coordinates using the calibration model, and analyzed their advantages and disadvantages. With the information of the reference point obtained by airborne photograph of a project, using the method of correcting the MMS survey data. Not only clear the deviation existing between the MMS survey data, it was possible to confirm that the deviation exists between the airborne survey data and MMS survey data was also almost erased.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2003.04a
• /
• pp.575-580
• /
• 2003

KOMPSAT-1 위성의 EOC영상은 위성에서 지구를 촬영하는 동안 발생하는 영상 왜곡을 포함하고 있다. 본 연구는 EOC영상의 영상왜곡을 보정하기 위하여 수치지도를 이용하는 정밀기하보정에 대하여 연구한다. 정밀기하보정 과정은 수치지도와 EOC영상의 좌표계를 통합하는 과정을 거쳐 오버레이를 만들어 수치지도의 삼각점을 기준으로 위성영상에서 GCP를 선택하고, 이 GCP를 이용하여 위성 영상을 딜로니 삼각형들의 Mesh형태로 변환하여 모든 딜로니 삼각형을 리샘플링하는 과정을 거쳐 보정된 EOC영상을 얻는다.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2000.10a
• /
• pp.40-50
• /
• 2000

본 연구에서는 Rolleiflex 6006 측정용 카메라로 촬영된 사진과 DCS 420 디지털 카메라로부터 촬영된 화상을 이용, 수치근접사진측량을 실시한 후, 조경석의 표면 거칠기 측정 정확도 향상을 위하여 최소제곱법으로 기준평면 또는 기준곡면을 찾아 사용하는 방법을 연구하였으며, 조경석 표면의 연마 이전과 연마 이후의 표면 거칠기를 측정, 비교하여 연마후의 거칠기 감소크기를 산출하고, 측정 정확도를 알아보기 위하여 거칠기가 거의 없는 평면인 돌과 곡면인 돌의 표면 거칠기를 측정한 결과, 그 거칠기를 기대정확도 이상인 각각 $\pm$0.lmm 및 $\pm$0.2mm의 정확도로 측정할 수 있었다. 또한 측정용 카메라인 경우 렌즈왜곡 보정에 있어서 검정자료를 토대로 기준점을 사용하지 않는 직접보정방법인 Newton-Raphson법을 적용하여 기하학적 정확도가 향상된 수치사진화상을 얻을 수 있었으며, DCS 420 디지털 카메라와 윈도우 운영체계인 Visual basic 6.0을 이용하여, 표면 거칠기 측정시스템을 구축함으로써 연마이전 조경석과 연마이후 조경석에 대한 표면 거칠기 및 형상을 정밀 측정할 수 있는 수치근접사진측량기법을 제시할 수 있었다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.20 no.2
• /
• pp.155-164
• /
• 2002

In this study, in order to discuss the geometric correction methods of high-resolution IKONOS satellite image, the existing polynomial model and RFM which is able to rectify satellite image without auxiliary data are applied to IKONOS satellite image data. Then the accuracy of ground point versus number of GCPs and each order of RFM are assessed. A numerical instability is removed by application of Tikhonov regularization method. As the results of this study, the root mean square errors of RFM is decreased more than 2 pixels in comparison with the two dimensional polynomial model.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.8 no.2
• /
• pp.23-29
• /
• 1990

Non-metric camera is more profitable than metric camera for geometric analysis of small and elaborate structures, because focal length control of non-metric camera is flexible while generally metric camera has limited focal length. And if the problem of conventional method requiring much time and endeavor to measure three dimensional positions of control points will be solved effectively, it is possible to analyze very close-range photogrammetry more easily and quickly. The purposes of this study are to propose the efficiency of non-metric camera and to reduce difficulty of control survey sharply by introducing self-control survey method. For these, very close-range photographs of the small object were obtained by using non-metric camera calibrated for systematic errors and then bundle adjustment is used for analysis procedure. As a result, the superiority of non-metric camera in analyzing very close-range photographs and the application proptriety of self-control survey were proved, therefore it is expected to be able to apply to precise analysis of small structures or spearhead parts.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2003.09a
• /
• pp.65-65
• /
• 2003

목적 : 방사선치료기술이 날로 발전함에 따라 방사선치료계획시스템에 대한 주기적인 정도관리의 필요성은 증대하고 있으나, 국내 실정에 적합한 표준화된 정도관리절차서가 없는 실정이다. 따라서 본 연구에서는 방사선치료계획용 시스템에 대한 정도관리용 고체팬톰을 제작하여 주기적인 정도관리 활용 및 절차서를 제시하고자 한다. 대상 및 방법 : 체윤곽 보정을 위한 삼각기둥 모형 (30cm$\times$30cm$\times$5cm, 30cm$\times$15cm$\times$5$\times$) 및 정형ㆍ부정형, 불균질 측정이 가능한 물등가고체팬톰을 제작하였고, 컴퓨터단층촬영(AcQsim)을 통해 영상을 얻었으며, RTPS(AcQplan)에 입력하여 영상 내 기준점에서의 선량값을 계산하였다. RTPS를 통해 계산된 값의 평가를 위해 동일한 조건하에서 각 기준점에 대한 실제 측정을 이온함을 이용하여 측정하였다. 평가 항목으로는 정방형 조사면, 부정형 조사면, 쐐기 조사면, 불균질 물질 보정, 사방향 조사 등에 대해서 알고리즘별로 수행하였다. 결과 : RTPS를 이용하여 계산된 값과 실제 측정한 값을 비교하여 RTPS의 정확성을 평가한 결과로 합성의 불확도 허용 기준 (3%), 선속 중심축 상에서의 허용 기준 (2%) 등, 선진 각국 및 각 학회에서 권고하고 있는 허용 범위 내에서 잘 일치하였다. 결론 : RTPS는 측정된 심부선량과 선량분포 등 물리적인 인자에 의존하는 제한성이 있고, 실제로 선량계산 알고리즘과 기하학적 변화에 따라 계산값과 측정값 간에 차이가 발생할 수 있었다. 실제 인체의 체윤곽 불균일성과 불균질성을 모사한 팬톰을 제작하여 이용함으로써 다양한 RTPS간의 비교를 통한 치료 선량의 정확성을 평가하고, 방사선 치료의 원활하고 정확한 수행을 위해 실용적이고, 보편적인 치료계획 시스템의 정도관리 방법과 절차서를 수립하는데에 유용할 것으로 사료된다.