• Journal of Energy Engineering
• /
• v.24 no.4
• /
• pp.211-216
• /
• 2015

Heat exchanger tube array in a heat recovery steam generator is exposed to the hot exhaust gas flow and it could cause the flow induced vibration, which could damage the heat exchanger tube array. It is needed for the structural safe operation of the heat exchanger to establish the characteristics of flow induced vibration in the tube array. The researches for the flow induced vibration of typical heat exchangers have been conducted by using single cicular tube or circular tube array and the nondimensional PSD(Power Spectral Density) function with the Strouhal number, fD/U, had been derived by experimental method. From the present study, the basis for the application of flow induced vibration to the heat recovery steam generator tube array would be prepared. For the previous mentioned purpose, the present CFD analysis introduced a single fin tube and calculated with the unsteady laminar flow over the single fin tube. The characteristics of vortex shedding and lift fluctuation over the fin tube was investigated. The derived nondimensional PSD was compared with the results of the previous experimental researches and the characteristics of lift PSD over a single fin tube was established from the present CFD study.

• Journal of the Korean Institute of Gas
• /
• v.20 no.2
• /
• pp.23-29
• /
• 2016

Heat exchanger tube array in a heat recovery steam generator is exposed to the hot exhaust gas flow and it could cause the flow induced vibration, which could damage the heat exchanger tube array. It is needed for the structural safe operation of the heat exchanger to establish the characteristics of flow induced vibration in the tube array. The researches for the flow induced vibration of typical heat exchangers have been conducted by using single cicular tube or circular tube array and the nondimensional PSD(Power Spectral Density) function with the Strouhal number, fD/U, had been derived by experimental method. From the present study, the basis for the application of flow induced vibration to the heat recovery steam generator tube array would be prepared. For the previous mentioned purpose, the present CFD analysis introduced a single fin tube and calculated with the unsteady laminar flow over the single fin tube. The characteristics of vortex shedding and lift and drag fluctuation over the fin tube was investigated. The derived nondimensional lift PSD was compared with the results of the previous experimental studies and the characteristics of lift and drag PSD over a single fin tube was established from the present CFD study.

• Proceedings of the Korea Society for Simulation Conference
• /
• 1999.10a
• /
• pp.235-235
• /
• 1999

화력 발전소의 드럼형 보일러 제어 프로세스에 있어 드럼 수위(Drum Level)의 정확한 측정은 매우 중요하다. 만약 드럼 수위가 불안정하게 되면 급수 유량 제어가 불안정하여 증기 온도 제어를 불안정하게 하고, 증기 온도의 변화는 보일러 출구 증기 압력을 변화시켜 연소 제어 계통을 불안정하게 한다. 결국 드럼 수위의 불안정은 발전소 전체 프로세스를 불안정하게 한다. 또한 드럼 수위의 오지시로 인해 수위가 과도하게 높아져 물이 터빈에 유입되면 터빈 날개의 파손을 가져오고, 반대로 수위가 너무 낮으면 과열로 인한 보일러 튜브의 파열을 초래하기도 한다. 특히, 보일러의 기동시 또는 과도상태일 때는 드럼 압력의 변화에 따른 water 및 steam의 밀도 변화로 인한 오차가 크며, 압력 대 밀도(비중)의 관계가 비선형 함수이므로 별도의 압력검출기에 의해 드럼 압력을 측정하여 압력 변화에 따른 오차를 보정해주어야 하는데 아날로그 시스템의 경우에는 이러한 압력 수위 보정을 기준 압력에 대해서만 하므로 기동시 또는 과도상태에서의 수위 제어에 많은 문제점이 있다. 본고에서는 이러한 보일러 드럼 수위 압력 보정의 유.무에 따라 드럼 수위 변화에 대해 시뮬레이션을 하여 압력 보정이 드럼 수위에 미치는 영향을 고찰하고자 한다.

• 열병합발전
• /
• s.71
• /
• pp.10-14
• /
• 2009

• Proceedings of the KWS Conference
• /
• 1990.04a
• /
• pp.1-34
• /
• 1990

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2001.11a
• /
• pp.17-18
• /
• 2001

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.13-15
• /
• 2014

최근 경제적인 연비와 효율적인 가동성, 배기가스 감소의 이유로 초임계압 보일러가 각광받고 있다. 하지만 보일러 연소로는 용접된 튜브로 구성되어 있기 때문에 연소 시 내부압력에 의해 발생되는 진동에 취약하여 이에 대한 진동안정성 평가가 필요하다. 본 논문에서는 CFD 기법을 기반으로 수행한 변동압력 해석과 단순화한 모델을 이용한 진동해석을 통하여 보일러 운전 시의 진동안정성 평가를 수행하였다. 변동압력해석은 정상상태 CFD 해석을 수행하고, 이를 이용한 음향모드 해석과 비정상상태 CFD 해석에서 변동압력을 추출하고, 음향모드 해석결과와 주파수 성분을 비교하여 검증하였으며 이를 진동해석 모델에 기진력으로 적용하여 보일러 연소로의 진동해석을 수행하였다. 진동해석 모델은 동특성을 고려한 등가물성치를 이용하여 연소로의 복잡한 구조를 단순화하였으며 buckstay 등의 방진구조를 구현하여 보일러의 진동안정성을 평가하는 기법을 정립하였다. 해석결과, 보일러 운전조건에서 비정상상태 CFD 해석을 통해 구한 변동압력과 진동해석을 통해 얻은 가속도 응답은 안정적 수준인 것으로 확인하였다. 이는 향후 유사한 보일러 안정성 평가에 적용이 가능하고, buckstay 등 보일러의 방진 구조 설계 및 평가에도 적용할 수 있음을 확인할 수 있었다.

• KEPCO Journal on Electric Power and Energy
• /
• v.6 no.2
• /
• pp.145-150
• /
• 2020

Water wall tube is one of the major factors consisting of a fluidized bed boiler and it plays very important role for the generation of electricity within the boiler. But these water wall tubes within the fluidized bed boiler are subject to the ware and corrosion caused by the high temperature gas and the flowing medium. If water leak is occurred, the secondary damage by the water leak will occur. As a result of that, the power generation efficiency decreases noticeably. Therefore, the maintenance of the water wall tube is very important. In this study, we designed a exciter sensor based on simulation and composed a remote field eddy current system for the defect evaluation of the outer water wall tube. Starting from the shape design of exciter, we conducted simulations for various design factors such as the water wall tube size, material, frequency, lift-off and so on. Based on the results, we designed the optimum exciter sensor for the water wall tube test within the fluidized bed boiler.

• Journal of Energy Engineering
• /
• v.22 no.3
• /
• pp.287-293
• /
• 2013

This study was carried out to diminish the formation of scale in boilers which is one of the defect elements when they are operating. The defect relating to scale can cause a fatal impact on the explosion of boilers due to the overheating of their tubes, or it can affect the flow of water inside boilers with its bad circulation and result in a disparity of water inside the equipment. Heat transfer in the scale is low comparing to the boiler material, so it can lead to energy losses and has also impact on the global warming. In 2005, the Korean government introduced a system which requires boiler users to install the equipment which can prevent or eliminate the formation of scale to improve the management of water quality in boilers. The study on the techniques for preventing or eliminating the formation of scale started in 1821 and since then subsequently there have been lots of similar studies. The first one was about the scale reduction using potato starch. Since an ultrasonic scale preventer developed by a scientist from a Russian acoustic institute was introduced in1993, a variety of equipment of this kind have been disseminated in Korea. There has been a need to demonstrate the condition for the best performances of such equipment. Boilers are mostly composed of the main body and 288 the tube with a circular curved surface. I carried out a demonstration study on a circular tube which affects the scale defect the most among the boiler components. As a result of it, I found out the fact that the ultrasonic wave needs to reach a certain level of sound pressure and frequency to affect the formation of scale.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.7
• /
• pp.4052-4056
• /
• 2014

These days, household condensing gas boilers are an obligatory trend. The use of environmentally-friendly boilers that emit less pollutant, such as CO and NOx, are strongly recommended. In this paper, heat flow analysis of the additional inner groove in the tube of the secondary latent heat exchanger was studied to increase the efficiency. A 20% difference in the heat transfer area was obtained with the addition of an inner grove, which showed an increase in the amount of heat transferred. This was confirmed using three-dimensional numerical analysis. With the addition of an inner groove, the exit temperature increased by $1^{\circ}C$. This increase in exit temperature was considered to be a substantial increase in the efficiency of the condensing gas boiler.