• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.5 no.4
• /
• pp.350-353
• /
• 2004

The integral reactor is tripped by the boron injection to the reactor when the CEA(Control element assembly) is not available due to its malfunction. In general, the borated water is made by dissolving the boron powder in the water and is stored in a tank. and then injected. But, this method is disadvantageous from the view point of construction cost, operation and maintenance because it has many components and is complicated. In this study, the boron powder direct vessel injection method is adopted to improve the system. Injecting the boron powder directly to the vessel and decreasing of number of components, the system configuration, operation and maintenance is simplified and the construction cost is reduced.

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.30 no.9
• /
• pp.17-26
• /
• 2001

최근 국제적인 여건과 사회적인 상황이 급변하여 대량생산-대량소비지향으로 인한 폐기물의 대량방출사회에서 지구환경보전을 중시하는 사회로 전환되어 가고 있다. 지구환경의 보전을 위하여 다양한 분야에서 각종 논의가 진행되고 있는 가운데 건축분야에서도 지구기후변화에 영향을 미치는 것으로 알려져 있는 이산화탄소배출의 억제와 폐기물 삭감 등에 대한 관심이 증대되고 있다. 최근 관심이 집중되고 있는 건축물의 장수명화와 리모델링도 이러한 움직임과 궤틀를 같이 하는 것이다. 물론 리모델링은 신축시장의 급감에 따른 대체시장으로서 검토되고 있는 측면이 더 크게 작용하고 있는 것도 사실이지만, 그동안 신축에 대한 집중적인 투자에 중점이 두어져 재고건축물에서 간과해 왔던 유지관리와 리모델링에 대한 중요성 인식이 결부되어 있다고 보여진다. 사실 지금까지 리모델링이 전혀 이루어지지 않았던 것이 아니라 일반건축물 부문에서는 상당부분 이루어져 왔으며, 공동주택 부문에서도 극소수 이루어져 왔다. 리모델링에 대한 정의와 개념을 어떻게 보느냐에 따라 많은 차이가 있을 수 있지만, 리모델링은 건축물 또는 외부공간의 성능 및 기능의 노후화나 진부화에 대응하여 보수, 수선, 개수, 부분증축 및 개축, 제거, 새로운 기능추가 및 용도변경에 이르는 광범위한 행위를 포함한다. 리모델링을 통하여 건축물의 성능을 유지하거나 향상시켜 쾌적하고 건강한 건축물의 재고 를 구축함과 아울러 건강한 지역환경을 조성하여 국민생활의 질적인 향상을가져옴으로써 환경을보전하 고 자원낭비를 줄여 지속가능한 건축물과 사회를 만들어 갈수있도록 하는 것이다. 건축물에서 리모델링을 하게 되는 동기는 시간이 흘러 물리적인 측면이나 기능적인 측면에서 노후화가 발생하거나 기능적인 요구가 변화함에 따라 건설당시의 성능이나 기능유지가 어렵거나 건설당시의 기능만으로는 요구조건을 만족함 수 없기 때문에 건설 당시의 수준을 유지하거나 새로운 요구에 적합하도록 향 상시키기 위해서는 물리적 또는 기능적인 개선이나 개량이 필요하기 때문이다. 물리적인 개선이나개량을위하여 중요한것은건축 물을 구성하는 자재나 부품의 수명문제이다. 수명의 길이차이가 건축물의 리모델링에 영향을 주고 있을 뿐만 아니라 서로 다른 수명의 자재나 부품의 접합상태가 리모델링 공사에 많은 영향을 미치게 된다. 리모델링 공사가 신축공사의 70-80% 정도의 공사비가 소요되기 때문에 리모델링 공사가 어렵다는 업체의 불만은 바로 이러한 점을 극명하게 드러내는 좋은 사례이다. 본 고는 이러한 측면에서 건축물의 장수명화를 근간으로 한 설비의 리모델링을 용이하게 하기 위한 건축 계획 및 구법에 대하여 고찰하고자 한다. 그리고 본 고는 기존건축물의 설비자체의 보수나 개수를 용이하게 하는 것에 초점이 맞추어진 것이 아니라 건축설계 및 시공시에 향후 설비부분을 용이하게 개.보수할 수 있도록 배려하는 측면을 중심으로 설명하였다.

• Journal of KIISE:Software and Applications
• /
• v.26 no.9
• /
• pp.1095-1104
• /
• 1999

객체지향 시스템의 개발은 클래스를 통해서 이루어진다. 즉, 문제 영역에 존재하는 중요한 대상 또는 개념을 클래스로 모델링하고, 이로부터 생성된 객체들 사이의 메시지 교환을 통해서 시스템은 구축된다. 또한, 클래스는 정보 은닉을 제공함으로써, 객체지향 시스템의 재사용성과 유지보수성에 상당한 기여를 한다. 그러나, 설계 단계에서 실세계의 대상을 부적절하게 모델링하거나, 또는 유지보수 단계에서 클래스에 무분별한 변경을 가하는 경우 클래스의 품질은 악화될 수 있고, 이는 결국 시스템을 유지보수 하거나 확장하는데 상당한 장애를 초래한다.응집도는 모듈의 구성 요소들 사이의 연관성 정도를 나타내는 척도로서 전통적으로 모듈의 품질을 평가하기 위한 기준으로 사용되어 왔다. 이 논문에서는 클래스의 품질을 평가하는 방법으로서의 클래스 응집도를 제안한다. 즉, 클래스가 실세계의 대상을 적절하게 모델링한다면, 그 구성요소들 사이에 밀접한 관련이 있고 결국 높은 응집도를 가지게 될 것이다. 반대로 실세계의 대상에 대한 적절한 모델이 아니라면, 그 클래스의 구성 요소들 사이에는 밀접한 관련성이 없을 것이고 따라서 낮은 응집도를 보일 것이다.Abstract Object-oriented systems are developed by means of classes; that is, classes captures the essential entities or concepts in the problem domain, and the system is embodied by the interactions of objects instantiated from the classes. In addition to the basic units of object-oriented systems, classes serves as the units of encapsulation, which considerably promote the modifiability and the extensibility of them. However, improper modeling in the design phase or uncontrolled changes during the maintenance phase can degrade the quality of classes, which leads to systems cumbersome to maintain and extend.Cohesion refers to the degree of connectivity among the elements of a single module, and is being used as a factor which characterizes the quality of a module. In this paper, we propose a new cohesion metric for assessing the quality of classes. If a class captures properly the essential features of objects, the members of the class surely have strong relationship among them. On the contrary, the poor relationship among class members can indicate that the class is not a proper model of objects.

• Korean Journal of Childcare and Education
• /
• v.10 no.4
• /
• pp.5-28
• /
• 2014

South Korea has strengthened the eligibility criteria for childcare teachers while amending the Infant Care Act in January 2005 in order to improve the quality of childcare services. Since then, there was a change in the legal basis related to childcare staff such as introduction of national certification of childcare center directors, name change, strengthened qualification standards for directors and teachers, training system maintenance and repair, strengthened credit standards of teachers' care related qualification courses, and maintenance provisions of continuing education nursery teacher qualifications. And that is because childcare staff are closely related to the quality of childcare, and a very important variable who has direct influence on infants. This study, through literature research and analysis, describes the status and development direction of childcare staff. This study covers three main aspects. First, the relevant historical flow was reviewed and the concepts of the role, expertise, and legal status of childcare staff were investigated. Second, staff training institutions, emissions certification, employment, and the status of treatment were investigated. Third, development direction for the training system, eligibility criteria, continuing education and its training system, and treatment improvement were proposed.

• Journal of Ocean Engineering and Technology
• /
• v.26 no.2
• /
• pp.58-67
• /
• 2012

Recently, both the integration of product data during design and production and the effective management of information during full lifecycles have attracted attention from shipyards and ship owners as a result of recycling regulations and a desire for efficient operations. Generally, PLM (Product Lifecycle Management) supports a collaborative environment during the BOL (Beginning of Life) stage, while an ALM (Asset Lifecycle Management) system provides all of the information required to maintain, overhaul, and discard/recycle all or part of a vessel during the MOL (Middle of Life) and EOL (End of Life) stages. The main goal of this paper is to suggest the fundamental configuration of a PALM (Product Asset Lifecylce Management) system and a method that can be used to utilize a marine vessel's lifecycle information during the MOL, emphasizing the maintenance information during the middle of life. The authors also suggest a PALM system configuration in which lifecycle information can be collected by a PEID (Product Embedded Information Device) integrating a microcomputer, sensors, and wireless network communication. Through a prototype PALM system, the suggested features and PALM system configuration are implemented.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.7
• /
• pp.939-949
• /
• 2023

In South Korea, a cloud-based vessel traffic service (Cloud VTS) system integrating the fourth industrial revolution technologies such as cloud and AI is currently under development in contrast to the existing VTS systems. A pilot center for at Busan VTS is being established based on differentiated technology and operational programs. The roles of operators and maintenance personnel who operate the innovative Cloud VTS system must be redefined. Additionally, a demand exists for the development of new educational programs to ensure the smooth operation of the Cloud VTS. Therefore, this study introduces the development details of a Cloud VTS system and explores educational strategies aimed at operators and maintenance personnel to ensure its safe operation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.2
• /
• pp.611-618
• /
• 2020

The reliability of the results of LCC analysis is determined by accurate analytical procedures and energy data from which the uncertainty is removed. Until now, systems that can automatically measure these energy data and produce databases have not been commercialized. Therefore this paper proposes a concept model of an S-LCC platform that can automatically collect and analyze electric energy consumption data of equipment systems using the IOT, which is the core tool in the Fourth Industrial Revolution and operates the equipment system efficiently using the analyzed results. The proposed concept model was developed by the convergence of existing BLCS and IOT and was comprised of five modules: Facility Control Module, LCC Analysis Module, Energy Consumption Control Module, Efficiency Analysis Module, and Maintenance Standard Reestablishment Module. Using the results of LCC analysis deduced from this system, the deterioration condition of an equipment system can be identified in real-time. The results can be used as the baseline data to re-establish standards for the maintenance factor, replacement frequency, and lifetime of existing equipment, and establish new maintenance standards for new equipment. If the S-LCC platform is established, it would increase the reliability of LCC analysis, reduce the labor force for entering data and improve accuracy, and would also change disregarded data into big data with high potential.

• The KIPS Transactions:PartA
• /
• v.11A no.4
• /
• pp.297-302
• /
• 2004

In the information-oriented society, the paradigm of education has changed from the existing traditional teaching-centered education to the learning-centered education. In the Web-based Learning System which an learning-centered educational environment using the internet, students should have responsibility of their learning as taking more opportunities to participate their learning positively, to control their process of learning and to evaluate their learning by themselves to improve self-directed loaming ability. In this paper, the Web-based Learning System with a Self-Study Plan to lead students to select own purposes and methods of the study and write a self_evaluation is developed. The Self-Study Plan is a guide to lead the process, an order to have an individualized study and a report to evaluate own study. In addition, the suggested System is designed through object-oriented method using the extension mechanism of UML to archive the improvement of reuse and maintenance.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.4 no.2
• /
• pp.46-60
• /
• 2001

This study proposes the Web-based GIS system based on distributed object management and conceptualise system architecture and its methods specifications through UML(unified modeling language). By using class diagram and creating prototype based on UML and reverse engineering, our conceptual shape file model is proposed to illustrate an integrated architecture. Through system analysis and software configuration management, this study enables to not only improve pliable capabilities for problematic domains and increase abilities for analytical domains when user requirements are dynamic, but also assist effective and consistent maintenances of large software systems.

• Journal of Korean Society for Geospatial Information Science
• /
• v.3 no.2 s.6
• /
• pp.183-197
• /
• 1995

The broad meaning of system integration is to satisfy user requirement, and to secure and offer Hardware, Software, network, System development, maintenance, education and manpower in his own responsibility for successful business. But the basic concept of system integration is not justified and the methodology of propel procedure is not established. Therefore, in this thesis. first, We established the bagic concept of system integration in practical view. second, We modeled the propel procedure of system integration with many large project examples in view of up to date IT (information technology) view. We can enhance the compatative advantage by liking organizational strategy and IT and executing GIS project in view of system integration