• Korean Journal of Poultry Science
• /
• v.40 no.3
• /
• pp.187-195
• /
• 2013

This study was investigated the effects of dietary supplementation of Yacon by-products and pine needle powder on growth performance, carcass characteristics, pH, TBARS (thiobarbituric acid reactive substance), WHC (water holding capacity), shear force, and meat color of chicken thigh meat. Broiler chicks were fed diets for five weeks containing 0% Yacon by-products and pine needle powder (Control), 0.5% Yacon by-products powder (T1), 1.0% Yacon by-products powder (T2), 0.5% pine needle powder (T3), and 1.0% pine needle powder (T4). There was no significant difference in growth performance among treatments, but mortality was decreased in diets by the supplementation of Yacon by-products and pine needle powder than that of control. The chicken fed control diet had higher cholesterol. LDL-cholesterol. triglyceride compared to those chicken fed Yacon by-products and pine needle powder regardless of concentrations, and HDL-cholesterol of control was lower than treatment. The pH and TBARS were significantly decreased by the supplementation of Yacon by-products and pine needle powder compared to the control (P<0.05), especially, pine needle powder group was significantly more effective in improving freshness compared to other test groups (P<0.05). The WHC and shear force were not significantly different. CIE $L^*$ and $a^*$ value of test groups showed significantly higher value compare to the control, however, no difference in the CIE $b^*$ values was observed among test groups. In conclusion, a supplementation of Yacon by-products and pine needle powder were effective in decreasing pH, TBARS, total cholesterol and LDL-cholesterol and increasing HDL-cholesterol concentration. Pine needle powder supplementation was most effective (T3 and T4).

• Journal of the Daesoon Academy of Sciences
• /
• v.36
• /
• pp.227-266
• /
• 2020

The purpose of this paper is to review the representative Buddhist policies enforced during the reign of Gwanghaegun (光海君), the 15th king of the Joseon Dynasty, and the aspects of the Buddhist community affected by them. Through this, the influence and dynamism of Buddhism during the reign of Gwanghaegun will be revealed. Some of the findings will run contrary to what is popularly known about Joseon Buddhism and the policy of Sungyueokbul (崇儒抑佛), 'Revering Confucianism and Supressing Buddhism.' During the Joseon Dynasty, Neo-Confucianism was taken as an ideological background, and consequently, Buddhism was ostracized by the ruling class who advocated the exclusion of heretical views. This also characterized King Gwanghaegun's reign during the Mid-Joseon Dynasty. In reality though, the ruling class held mixed opinions about Buddhism, and this influenced the Buddhist community in the Gwanghaegun Period. The military might of Japan demonstrated during the Japanese Invasion of Korea in 1592, led the ruling class to recognize Buddhism, and as a result, the status of Buddhism rose to a certain extent. Based on its elevated status and the aftermath of the Japanese Invasion of Korea, the Buddhist community engaged in social welfare activities inspired by the notion of requiting favors, and the Buddhist community gained recognition for providing relief services. As a result, the number of monks increased, and the economic situation improved as land ownership was granted to temples and monks. This is the means by which the Japanese Invasion of Korea influenced the Buddhist policies of the Gwanghaegun Period and changed the religious topography of Buddhism. During the reign of King Gwanghaegun, the ruling class regarded Buddhism as heretical, but offered posthumous titles to monks who engaged in meritorious services during the Japanese invasions of 1592~1598. Favorable and/or preferential treatment was also granted to some Buddhist monks. In addition, monks began to perform labor projects that demanded organizational and physical strength, such as those which related to national defense and architecture. However, throughout the Gwanghaegun Period, the monks were paid a certain amount of compensation for their labor, and the monks' responsibility for labor increased. This can be understood as a partial reconciliation with Buddhism or an acceptance of Buddhism rather than the suppression of Buddhism often presented by historians. As for policies which affected Buddhism, the Buddhist community showed signs of cooperation with the ruling class, the creation and reconstruction of temples, and the production of Buddhist art. Through close ties with the ruling class, Buddhism during the Gwanghaegun Period saw the Buddhist community actively responded policies that impacted Buddhism, and this allowed their religious orders to be maintained. In this way, it was also confirmed that the monk, Buhyu Seonsu (浮休 善修) and his disciple Byeogam Gakseong (碧巖 覺性), took up leadership roles in their Buddhist community. The Buddhist-aimed policies of Gwanghaegun were implemented against the backdrop of the Buddhist community, wherein the ruling class held mixed opinions regarding Buddhism. As such, both improvements and set backs for Buddhism could be observed during that time period. The ruling class actively utilized the organizational power of Buddhism for national defense and civil engineering after the Japanese invasions of 1592~1598. Out of gratitude, they implemented appropriate compensation for the Buddhists involved. The Buddhist community also responded to policies that affected them through exchanges with the ruling class. They succeeded in securing funds and support to repair and produce Buddhist temples and artworks. A thoughtful inspection of the policies towards and responses to Buddhism during the Gwanghaegun Period, shows that Buddhism actually enjoyed considerable organizational power and influence. This flies in the face of the general description of Joseon Buddhism as "Sungyueokbul (revering Confucianism and supressing Buddhism)."

• Proceedings of the KSEEG Conference
• /
• 2001.05b
• /
• pp.42-63
• /
• 2001

The detail survey on the Songsanri tomb site including the Muryong royal tomb was carried out during the period from May 1 , 1996 to April 30, 1997. A quantitative analysis was tried to find changes of tomb itself since the excavation. Main subjects of the survey are to find out the cause of infiltration of rain water and groundwater into the tomb and the tomb site, monitoring of the movement of tomb structure and safety, removal method of the algae inside the tomb, and air controlling system to solve high humidity condition and dew inside the tomb. For these purposes, detail survery inside and outside the tombs using a electronic distance meter and small airplane, monitoring of temperature and humidity, geophysical exploration including electrical resistivity, geomagnetic, gravity and georadar methods, drilling, measurement of physical and chemical properties of drill core and measurement of groundwater permeability were conducted. We found that the center of the subsurface tomb and the center of soil mound on ground are different 4.5 meter and 5 meter for the 5th tomb and 7th tomb, respectively. The fact has caused unequal stress on the tomb structure. In the 7th tomb (the Muryong royal tomb), 435 bricks were broken out of 6025 bricks in 1972, but 1072 bricks are broken in 1996. The break rate has been increased about 250% for just 24 years. The break rate increased about 290% in the 6th tomb. The situation in 1996 is the result for just 24 years while the situation in 1972 was the result for about 1450 years. Status of breaking of bircks represents that a severe problem is undergoing. The eastern wall of the Muryong royal tomb is moving toward inside the tomb with the rate of 2.95 mm/myr in rainy season and 1.52 mm/myr in dry season. The frontal wall shows biggest movement in the 7th tomb having a rate of 2.05 mm/myr toward the passage way. The 6th tomb shows biggest movement among the three tombs having the rate of 7.44mm/myr and 3.61mm/myr toward east for the high break rate of bricks in the 6th tomb. Georadar section of the shallow soil layer represents several faults in the top soil layer of the 5th tomb and 7th tomb. Raninwater flew through faults tnto the tomb and nearby ground and high water content in nearby ground resulted in low resistance and high humidity inside tombs. High humidity inside tomb made a good condition for algae living with high temperature and moderate light source. The 6th tomb is most severe situation and the 7th tomb is the second in terms of algae living. Artificial change of the tomb environment since the excavation, infiltration of rain water and groundwater into the tombsite and bad drainage system had resulted in dangerous status for the tomb structure. Main cause for many problems including breaking of bricks, movement of tomb walls and algae living is infiltration of rainwater and groundwater into the tomb site. Therefore, protection of the tomb site from high water content should be carried out at first. Waterproofing method includes a cover system over the tomvsith using geotextile, clay layer and geomembrane and a deep trench which is 2 meter down to the base of the 5th tomb at the north of the tomv site. Decrease and balancing of soil weight above the tomb are also needed for the sfety of tomb structures. For the algae living inside tombs, we recommend to spray K101 which developed in this study on the surface of wall and then, exposure to ultraviolet light sources for 24 hours. Air controlling system should be changed to a constant temperature and humidity system for the 6th tomb and the 7th tomb. It seems to much better to place the system at frontal room and to ciculate cold air inside tombs to solve dew problem. Above mentioned preservation methods are suggested to give least changes to tomb site and to solve the most fundmental problems. Repairing should be planned in order and some special cares are needed for the safety of tombs in reparing work. Finally, a monitoring system measuring tilting of tomb walls, water content, groundwater level, temperature and humidity is required to monitor and to evaluate the repairing work.

• Journal of the Korean Society of School Health
• /
• v.5 no.1
• /
• pp.36-63
• /
• 1992

The purpose of this study was development of school health education curriculum in primary school based on analysis of the textbooks published in 1991. 1) The health education curriculum in primary school consisted of four major components such as health education aspects of the healthful school environments, health education aspects of school health services, health education course, and health instruction in related subjects. However, health instruction taught by physical education, biology, and other health related subjects was not systematic organization for health care. 2) A considerable amount of health knowledge and attitude, and some health practices was learned as the result of experiences in other courses, where there was little or no reference to health. It must be developed health edcation course separated from health related subjects. 3) Direct health insruction was represented by the health education course. The health education courses must be considered to be heart of the school health education curriculum. 4) The health education course developed by this study was consisted of eight health units and problems in the early elementary grade or health classes in the higher years. 5) The health education course developed by this study provided the opportunity for acquring new knowledge, attitude, and practice, for discarding the unhealtful attitude and strengthening the healthful attitude and practices of primary school students.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.26 no.2
• /
• pp.11-18
• /
• 2018

Biochar is a carbon-rich solid product obtained by the pyrolysis of biomass. It has been suggested to mitigate climate change through increased carbon storage and reduction of greenhouse gas emission. The objective of this study was to evaluate carbon dioxide ($CO_2$) and nitrous oxide ($N_2O$) emissions from soil after various biochars addition. The biochars were produced by pyrolysing pear branch, rice hull and bean straw at $400{\sim}500^{\circ}C$. The treatments were consisted of a control without input of biochar and three type biochars input as 5.0 Mg/ha. Emissions of $CO_2$ and $N_2O$ from upland soil were determined using closed chamber for 8 weeks at $25^{\circ}C$ of incubation temperature. It was shown that the cumulative $CO_2$ were 207.1 to $255.2g\;CO_2/m^2$ for biochar input treatments and $258.6g\;CO_2/m^2$ for the control after experimental periods. The cumulative $CO_2$ emission was slightly decreased in biochar input treatment compared to the control. It was appeared that cumulative $N_2O$ emissions were $2,890.6mg\;N_2O/m^2$ for control, 379.7 to $525.2mg\;N_2O/m^2$ for biochar input treatment at the end of experiment. All biochar treatments were found to significantly reduce $N_2O$ emission by 82~87%. Consequently the biochar from byproducts such as pear branch, rice hull and bean straw could suppress the soil $N_2O$ emission. The results from the study imply that biochar can be utilized to reduce greenhouse gas emission from the upland field.

• Survey Research
• /
• v.13 no.1
• /
• pp.135-158
• /
• 2012

Korean telephone surveys have been based on landline telephone directory or RDD(Random Digit Dialing) method. These days, however, there has been an increase of the households with no landline, or households with the line but not willing to register in the directory. Moreover, it is hard to contact young people or office workers who are usually staying out of home in the daytime. Due to these issues above, the predictability of election polls gets weaker. Especially, low accessibility to those who stay out of home when the poll's done, results in predictions with positive inclination toward conservatism. A solution to resolve this problem is to contact respondents by using both mobile and landline phones-via landline phone to those who are at home and via mobile phone to those who are out of home in the daytime(Mixed Mode Survey, hereafter MMS). To conduct MMS, 1) we need to obtain the sampling frames for the landline and mobile surveys, and 2) we need to decide the proportion of sample size of both. In this paper, we propose a heuristic method for conducting MMS. The method uses RDD for the landline phone survey, and the access panel list for the mobile phone survey. The proportion of sample sizes between landline and mobile phones are determined based on the 'Lifestyle and Time Use Study' conducted by Statistics Korea. As a case study, 4 election polls were conducted in the periods of the special election for the mayor of Seoul on Oct 26th, 2011. From the initial 3 polls, reactions and responses regarding the issues raised during the survey period were appropriately covered, and the final poll showed a very close prediction to the real election result.

• Archives of design research
• /
• v.17 no.2
• /
• pp.425-436
• /
• 2004

A new design field called eDesign appears as if eBiz is an online related business in which an industrialized design creates the individual value added facing a digital revolution. The field of eDesign requires a special design process and management methodology regardless of the fact that human sensitivity will be satisfied through a dehumanized computer technique. However, it is the reality of eDesign that has been dependent upon a simple process or project management tool of general design. In this study, we develop an eDesign platform based on an eDesign process and template mainly focused on eBusiness in order to overcome the wrong situation. The template is a kind of document that has a standardization form. We aim to establish a general process through various case projects, store information using a necessary template, and use for the way of visual communication. We propose a standard of eDesign platform that can be widely applied to the field of design, medium and small enterprises focused on IT businesses or design-team through this project performed as an educational-industrial study. It makes it possible to get a detailed process methodology, which can be applied to many small design related companies that don't have their own process yet, and will be a scale for comparing their own process in which the company has a process of opened standard eDesign with it. In addition, it makes possible a systematic control of the own projects within and outside the firm, accumulating information for the firm through the database, and easy communication. Furthermore, it can be applied to check the process of the project as a checklist, and then it will reduce trial and error repeated for every project that has been done.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.10 no.1
• /
• pp.44-52
• /
• 2007

Integrated Coastal Management(ICM) has been recommended by international organizations and experts as a desirable way of dealing with the current problems of ocean pollution and ocean conservation and dealing with the conflicts among the various users of coastal and ocean resources. As a response, the Korean government legislated Coastal Management Act in 1999. following the Act, local governments were required to make a local integrated coastal management plan(LICMP). Though the LICMPs are made, it is not easy to put LICMP in effect, because the mandates of the Coastal Management Act are not clear and there are conflicts regarding the jurisdiction of the coastal areas among relevant departments of the government and because it is not easy to monitor and supervise the activities along the vast areas of coasts and oceans. The traditional method of Implementing the LICMP was not simply feasible. Community-based approach to the ICM was proposed as an alternative to the traditional method. This study aims to examine and introduce the community-based network of organizations as an alternative form of organization best suited to the integrated coastal management. This study is composed of four major parts. First, it examines the advantages of the network as a form of organization vis-vis the market and the hierarchy. Second, it reviews three well-known cases of integrated coastal management programs - Xiamen ICM program in China, Coastcare in Australia and Atlantic Coastal Action Program in Canada. Third, on the basis of the case study, it proposes principles and guidelines which we need to consider when we introduce the community-based approach to the ICM in Korea. Fourth, this study also reports on the actual networking processes in Yeosu City(the Yeosu Network for the effective implementation of integrated coastal management plan). The networking in Yeosu will serve as a demonstration of networking various stake-holders concerned with the balance between the development and conservation of finite ocean resources.

• Proceedings of the Korea Society of Information Technology Applications Conference
• /
• 2007.05a
• /
• pp.300-320
• /
• 2007

정보기술의 발달과 함께 소프트웨어 제품은 모든 산업에 필수요소가 되었고, 품질과 평가에 대한 관심도 점차 증가되고 있다. 하지만 일부 산업에서는 소프트웨어 품질 평가에 대한 사용자들의 만병 통치적 기대, 품질 표준의 부족, 측정을 위한 양질의 데이터 부족, 소프트웨어 분석과 디자인에 대한 공학적 한계로 소프트웨어 품질 평가에 대해 많은 문제점이 지적되고 있다. 국내에서도 의료산업 관련 정보시스템의 오류 및 사용자들의 운영 미숙은 매년 많은 금액의 사회적 비용을 증가시켰고, 병원정보시스템의 품질에 대한 관심을 초래하였다. 특히, 산업적 특성이 강한 병원정보시스템은 성공적 구축을 위해 사용자 중심의 소프트웨어 디자인과 다양한 전문가들의 지식 통합이 필요하며, 정보시스템 품질 측정으로 연구자들과 개발자들의 시스템 설계 혼란을 감소시키는 방법론이 필요하다는 연구들이 등장하고 있다. 대부분의 병원정보시스템이 단편적인 업무처리 위주로 개발 운영되고 있고, 장기적 경영전략이나 임상연구를 위한 분석적 정보처리 기능들은 결여되어 있다. 또한 소프트웨어 재설계나 추가적 개발 에 활용될 수 있는 객관적 품질 기준이 부족하고, 사용자들의 요구사항에 대해 소프트웨어 설계에 있어서 효율적으로 반영되지 못하고 있다. 이에 본 연구는 최근 발표된 병원정보시스템 품질 평가에 대한 연구 경향을 종합하고, 품질 평가에 대 해 효율적으로 활용되고 있는 사용성(Usability)을 기준으로 병원산업의 특수성을 포함한 품질 평가 방법과 품질척도를 제안하고자 한다. 국제표준기구(ISO:International Standards Organization)에서는 품질 특성을 기능성, 신뢰성, 사용성, 효율성, 유지 보수성과 이식성의 특성을 제시하고 있다. 특히 Folmer & Bosch(2004)가 정리한 ISO9126에서는 품질의 특성을 배움의 용이성, 운영의 용이성, 이해성과 매력성으로 분류하였고, ISO9241-11는 효과성, 효율성과 만족성으로 분류하였다. 또한 Shackel(1991)은 배움의 용이성(배움과 시간, 기억력), 효과성(오류, 직무시간), 유연성과 마음가짐으로 분류하고 있다(Shackel, 1991). Nielsen(1997)은 배움의 용이성, 기억의 용이성, 오류, 효율성, 만족성으로 분류하고 있고(Nielsen, 1997), Shneiderman(1998)는 효과성(직무시간, 배움의 시간), 효율성(기억의 지속시간, 오류), 만족도를 품질의 특성으로 분류하였다. 이와 같은 소프트웨어의 품질은 소프트웨어 계획, 개발, 성장과 쇠퇴의 모든 과정에 적용되며, 환경적 변화에 따라 사용자들의 정보욕구를 적절하게 반영하여 만족도를 높이 는 것이라고 요약할 수 있다. 그러나 현재까지 소프트웨어 품질 평가에 대한 연구들 은 보편적인 평가 항목들을 대상으로 측정하여 일반적인 품질기준을 제시하고 있고, 유사한 측정 내용들이 중복되어 있다. 이러한 경향은 산업별 특수성이 강한 소프트웨어에 대해서는 정확한 품질측정이 어려웠고, 품질측정에 대한 신뢰성을 떨어뜨리는 계기가 되었다. 이러한 한계를 극복하고자 나타난 방법론이 최종사용자들의 요구사항을 얼마나 적절하게 시스템에 반영했는지에 대한 사용성(Usability) 측정이다. 사용성에 대한 정의는 사용자들이 실질적으로 일하는 장소에서 직접 사용자들의 시스템 운용실태를 파악하여 문제점을 개선하는 것으로 요약할 수 있다. ISO9124-11에서는 사용성을 "어떤 제품이 구체적인 사용자들에 의해 구체적인 목적을 달성하기 위한 구체적인 사용의 맥락에서 효율성, 효과성을 만족함으로 사용될 수 있는 정도"로 정의하고 있다. 지난 10년간 병원정보시스템 평가에 대한 문헌들을 고찰한 결과 품질 측정의 효과는 정보화에 대한 동기유발과 의료품질을 높이는 게기가 되었으며, 질병에 대한 예방효과도 높은 것으로 조사되었다. 그러나 평가에 대한 인식의 문제, 평가 방법의 신뢰성 부족, 평가 지침과 부분적 평가에 따른 인증의 어려움 평가 결과에 대한 확산과 단편적 연구의 한계 등으로 연구결과에 대한 신뢰도와 활용도는 낮은 것으로 조사되었고, HIS에 대한 연구 빈도와 범위 가 매우 미약하였다. 특히, 품질속성은 같은 용어이지만 연구자에 따라 전혀 다른 측정 내용을 제시하고 있어 효율적인 품질 지표를 제시하는데 많은 혼란을 초래하고 있다. 이러한 품질 평가의 경향은 시스템 설계 및 개발자들에게 필요한 사용자들의 구체적이고 독특한 욕구나 병원정보시스템 환경의 특수성 파악에 한계를 보였으며, 평가 범위도 부분적으로 이루어져 전사적 시스템 설계 및 개발에 중요한 자료를 제공하지 못하고 있다. 이러한 문제점과 한계를 극복하고자 ISO와 같은 품질 표준 속성과 컨텍스트(Context)를 중심으로 사용자에 의한 평가 척도의 설정은 구체적이고 실용적이며 신뢰성 있는 평가 방법이 될 것이다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.5
• /
• pp.131-138
• /
• 2018

In this study, we investigated the trend of technological development in major countries related to the propulsion equipment of railway vehicles. The propulsion system is the main equipment of electric vehicles. A lot of time and investment are required in order to ensure the development of technology. Therefore, developed countries have maximized their effort to develop technologies with safety, reliability, and convenience of maintenance. They have also done their utmost to prevent technology transfer to other countries after the development of new technologies. For example, Toshiba of Japan developed a new 3,300V/1,500 A class IGBT power device, but was reluctant to export it to foreign countries in order to protect this technology. In this study, we analyzed the patents applied for related to propulsion control systems and presented the direction of development during the technical development of these systems. The patent analysis of the core technologies was conducted using the Thomson Innovation DB. We examined the number of patents applied for by country, year and major applicant. As a result of the analysis, it was found that the proportion of patent applications per country was in the order of China, 48%, Europe 16.6%, and the United States 14.9%. The patent situation of the top 10 principal applicants revealed that (the top three were?) ABB 14%, GE 13%, and CRRC 12%. At the same time, we also conducted a qualitative analysis of the level of technical development by evaluating such factors as the influence index, quotation, market securing power and citation. Based on the result of the patent analysis, we presented the direction of technical development of the propulsion control equipment of railway vehicles. Based on the analysis results, it was found that domestic applicants considerably reduced their efforts to protect their patents from foreign companies. Nowadays, most of the electric motors used in Korea are induction motors. In advanced countries, permanent magnet electric motors are employed in new railway lines. Therefore, intensive investment is needed in new developments.