• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.285-285
• /
• 2015

댐 및 저수지 시설물은 노후화나 안전성 미확보로 인한 파손 또는 붕괴 발생 시 하류부에 막대한 인명과 재산피해 등 치명적인 결과를 초래하게 된다. 이러한 대형 안전사고를 예방하고자 시설물의 안전관리에 관한 특별법에서는 댐 시설물을 규모별로 1, 2종 시설물로 구분하고, 이에 대해 주기적으로 안전점검 및 정밀안전진단을 실시하도록 제도화하는 한편 진단 결과에 따라 보수 보강 등의 안전조치를 의무화하고 있다. 구조물 결함에 따른 보수 보강은 보수재료와 공법 선정시 공법의 적용성, 구조적 안전성, 경제성 등을 종합적으로 검토하여 결정하여야 한다. 손상 부위에 대한 보수 보강은 제한된 예산과 인력을 효율적으로 투자하기 위해 보수재료 및 공법의 선정 뿐만 아니라 보수 보강이 이루어져야 하는 부재에 대한 우선순위를 산정하는 것이 최우선적으로 선행되어야 한다. 안전점검 및 정밀안전진단 세부지침에서는 보수 보강 대책 마련 시안전점검 및 정밀안전진단 결과를 기초로 하여 적정 재료 및 공법을 선정하고, 보수 보강의 수준 및 우선순위를 결정하도록 명시되어 있다. 하지만 우선순위 결정에 대한 가이드라인이 부재하여 불필요한 시공과 비효율적인 예산 투입으로 인해 국가예산의 낭비되고 시설물의 안전까지 위협받게 되는 경우가 발생하고 있다. 따라서 본 연구에서는 시설물의 상태에 따른 적절한 보수 보강 필요성을 판단하고 보수 보강 수준 및 우선순위를 결정하기 위한 방법론을 개발하였다. 댐 시설물에 대한 안전점검 및 정밀안전진단의 종합평가는 평가대상 개별시설에 대하여 상태 평가 및 안전성 평가를 실시한 후 그 결과에 의해 산출된 상태평가지수와 안전성평가지수를 비교하여 평가단계별로 그 결과를 취합하여 종합평가를 실시하고 있다. 따라서 상태평가에 의해 산정된 종합평가 결과를 이용하여 개별 부재의 상태평가값 산정을 위해 하부 단계의 가중치 및 평가 지수 역산하고, 재산정된 가중치 및 평가지수를 이용하여 각 부재에 대한 보수 보강 우선순위를 산정하고자 하였다. 개발된 방법론은 점검 진단 책임기술자 및 시설물 관리주체 담당자가 댐 시설물의 개별부재에 대한 보수 보강 실시 여부를 판정할 수 있는 기준으로, 보수 보강에 대한 정책 결정시 경제성을 고려한 신뢰도 있는 기준으로 활용될 수 있을 것으로 기대된다.

• International Journal of Highway Engineering
• /
• v.11 no.2
• /
• pp.37-44
• /
• 2009

Currently the reasonability of threshold values for rutting and cracking does not clearly defined at the Pavement Rehabilitation Decision Tree on national highway PMS(Pavement Management System). The goal of this study is to provide the reasonable threshold values for the national highway asphalt concrete pavement rehabilitation. To achieve this goal, test section that represents typical asphalt concrete pavement of national highway was selected and pavement export were participated. Pavement condition survey has been conducted and pavement performance data at the selected roadway section were analyzed. From this study, reasonable threshold values of Pavement Rehabilitation Decision Tree were suggested based on the pavement expert's engineering judgement. In terms of crack repairs, the application of overlay after cutting is required to deteriorated area where existing crack ratio is over 35% and just overlay is required to where crack ratio is over 20%. On rutting, rut depth over 13mm is required to overlay after cutting and rut depth over 10mm is just needed to overlay.

• International Journal of Highway Engineering
• /
• v.3 no.2 s.8
• /
• pp.141-147
• /
• 2001

Maintenance cost for managing the whole network of Expressway system in Korea increases rapidly with the increase of the total length of the system. Implementation of the Pavement Management System(PMS) is essential for efficient management of the Expressway with a limited budget. The purpose of this study is to develop the main algorithm of PMS for Korea Expressway System and to associate the algorithm with database and the Highway Geographic Information System(HGIS) recently developed. Emphasis is laid on developing the algorithm as easy as possible, so that the users can use the PMS without practical difficulty. PMS is not the decision maker, but just a supporting system for the user. The algorithm is designed in such a way that the users can modify the decision criteria if necessary. The user is the one who makes the final decision of the priority and the maintenance alternatives. The users can also inquire the current condition of the whole Expressway network in detail by association of the database and the algorithm with HGIS.

• 한국방재학회:학술대회논문집
• /
• 2009.02b
• /
• pp.119.1-119.1
• /
• 2009

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.10 no.1
• /
• pp.223-230
• /
• 2006

In this paper the method for repair LCC evaluation of reinforced concrete structures deteriorated by chloride attack was constructed. Also, the FEM analysis for chloride ion penetration into concrete was conducted to evaluate the repair LCC which was decided by the number of repair times including early stages of construction and repair construction during the service life of structures. As a result, the number of repair times is obtained from the comparing the concentration of the chloride ion in a rebar position, and the critical chloride ion concentration of rebar corrosion through the FEM analysis considering the kind of repair materials and methods. Also, the repair LCC could be calculated by the number of repair times during the service life of structures.

• 한국도로학회지:도로
• /
• v.3 no.2 s.8
• /
• pp.28-34
• /
• 2001

• 한국도로학회지:도로
• /
• v.4 no.1 s.11
• /
• pp.51-57
• /
• 2002

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.11
• /
• pp.128-134
• /
• 2016

Estimating the repair and reinforcement (R&R) costs for each bridge member is essential for managing the life cycle of a bridge using a bridge management system (BMS). Representative members of a bridge were defined in this study, and detailed and representative R&R methods for each one were drawn in order to develop a systematic maintenance cost model that is applicable to the BMS. The unit cost for each detailed R&R method was established using the standard of estimate and historical cost data, and a systematic procedure is presented using an integration program to enable easy renewal of the R&R unit cost. Also, the average unit cost of the representative R&R methods was calculated in the form of a weighted average by considering the unit cost and application frequency of each detained R&R method. The appropriateness of the drawn average unit cost was reviewed by comparing and verifying it with the previous historical unit cost. The suggested average R&R unit cost can be used to review the validity of the required budget or the appropriateness of the R&R performance cost in the stage to establish the bridge maintenance plan. The results of this study are expected to improve the reliability of maintenance cost information and the rationality of decision making.

• 한국도로학회:학술대회논문집
• /
• 2006.03a
• /
• pp.55-62
• /
• 2006

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.14 no.1
• /
• pp.117-124
• /
• 2010

Different to other social infrastructures, bridge elements or bridges can be damaged or collapsed and this may cause death toll and severe social and economical damage, bridges should be managed to maintain a safety level. Diverse strengthening methods is developed to improve a deteriorated bridge performance up to original design level. But rational decision-making process and methodologies to select a optimum strengthening method are absence yet in Korea. This paper therefore derived items and proposed methodologies for quantity estimate considering uncertainty to select a optimum strengthening method among conceptually designed alternatives. And also, to demonstrate the applicability and verification of the proposed approach, it was applied to select the optimum strengthening method for the deteriorated T-shape concrete girder bridge. The model and the procedure can greatly contribute to the uncertainty-oriented alternative selection.