• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2015.07a
• /
• pp.81-83
• /
• 2015

본 논문은 방송의 가상스튜디오 제작 환경에서 많이 사용되는 회전 또는 스크롤 메뉴를 진행자가 직접 휠(회전보드)을 움직여, 진행자와 그래픽과의 자연스러운 상호작용이 가능한 인터랙티브 가상현실 방송 제작 어플리케이션을 제안한다. 이를 위해, 우리는 물리적인 휠의 움직임을 인지할 수 있도록 관성측정장치(IMU: Inertial Measurement Unit)를 사용하였으며, IMU 센서가 부착된 휠을 크로마키로 처리하기 위해 푸른색의 페인팅된 물리적인 휠을 사용하였다. 본 어플리케이션을 통해서 가상스튜디오의 연기자는 물리적인 휠의 움직임을 느끼면서 휠을 회전시킴으로써 별도의 연습이나 훈련 없이도 직관적으로 회전하는 여러 타입의 가상 그래픽 메뉴를 제어할 수 있다. 우리는 상하 스크롤, 원형 회전, 스크롤 연동형 메뉴 어플리케이션들을 개발하였으며, 이것을 방송에 적용하여, 연기자와 휠에 연동한 그래픽과의 인터랙션이 자연스럽게 합성됨을 확인하였다.

• Proceedings of the KAIS Fall Conference
• /
• 2004.06a
• /
• pp.236-239
• /
• 2004

본 논문은 ARM7TDMI 칩을 사용하여 전광판 시스템을 설계하고 자체적인 한글 입출력 처리가 가능하도록 하였다. 그리고 사용자가 원하는 표출문구의 입력, 편집을 쉽고 편리하게 할 수 있는 여러가지 형태의 입력방법에 대해 연구하였다. 기본적으로 PC에 의한 유/무선 문구입력과 PDA에 의한 유무선 문구입력이 가능하게 하였다. 또한 LINUX OS가 포팅 된 PXA255프로세서 기반의 임베디드 보드에서 Graphic Library인 QT/Embedded 2.3.7을 터치패널사용이 가능하도록 포팅 하여 원격지의 전광판에 문구를 이더넷 통신방법에 의해 쉽게 바꿀 수 있게 하였으며 인터넷상에 링크되어있는 유용한 정보를 전광판에서 실시간적으로 볼 수 있도록 하였다.

• Journal of the Korea Computer Industry Society
• /
• v.9 no.2
• /
• pp.69-76
• /
• 2008

This paper implement an Camcorder NTSC camera autofocus control system on the DSP Board. The information of camera lens control obtain the only brightness simple image processing from the NTSC camcoder camera image. The exact focus makes the exact boundaries. The camera lens control that the increase sum of the useful ingredient values. Useful value obtained experiment value. Also noise is except because a big value of the ingredients so that obtained focus more accurate value.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.41 no.2
• /
• pp.37-44
• /
• 2004

In this paper, we performed the design and the development of the wide-band correlation board to be an important role in the autocorrelation spectrometer's building for the observation study of an extra-galaxy's spectral lines and the survey research of the special radio sources in field of the radio astronomy. In this research, the developed correlation board by using QUAINT correlator chip(made by NRAO) has maximum 100 MHz clock speed and operate at a intermediate frequency with 400 MHz bandwidth. For the Performance test we supply the 0.5 and 1.67 MHz rectangular wave, then we obtain the autocorrelation coefficients. The final results, which process by using FFT, get the almost same results compare with the theoretical correlation.

• Journal of Digital Convergence
• /
• v.14 no.12
• /
• pp.27-33
• /
• 2016

I would like to analyze the customers accommodation availability of the provisional 'smart board,' having specific mode and style, as a circulation platform of digital contents with using a statistic model in order to find a way and means to activate legal circulation of convergence individual products. The smart board means a circulation platform for both users' convenience and copyright protection, by being conveniently able to upload personal convergence digital contents or apply various licence to the uploaded contents according to the purpose of use. Under these premises of the smart board, this paper is going to focus on verifying to find out which factors, such as users' profile attributes, contents using behaviors, awareness of licence and etc, influence on the intention of using the smart board of general users by using a logistic regression model.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.6
• /
• pp.1183-1190
• /
• 2018

The environmental regulations are being strengthened all over the world, and the introduction of electric vehicles are actively being considered to cope with them effectively. It is essential to establish a charging infrastructure, which is an essential element of electric vehicle distribution. In this paper, power line communication technology essential for smart charging infrastructure is studied. A control board capable of achieving a physical layer speed of 10Mbps and a TCP/IP layer of 4.5Mbps, which conforms to the ISO/IEC 15118 international standard, and a control board mounted on the board and compliant with international standards. We have developed a software solution to perform functions for linking. In addition, in order to be applied to the combo-type DC fast charger, the hardware was designed to meet the industrial environment standard and the V2G communication module was developed by integrating it with the software solution.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.3
• /
• pp.159-166
• /
• 2010

As Power Line has been already installed over 60% of a residential area all over the world, Broadband Service has been possible using high-speed PLC(Power Line Communication) without new access line installed for Internet access. Because of such reason, PLC is researched as the most suitable service for Last Mile Solution. But, Power Line is designed for transmitting electric power, so peripheral Wireless Communication System is affected by a leak of electric wave. In this paper, we propose a High Performance Notch Filter algorithm in comparison with a existing notch filter for reduction of interference between existing Wireless Communication Service and Power Line Service. In addition, we implement the Notch Filter emulator appling a High Performance Notch Filter and using a embedded board.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2016.01a
• /
• pp.13-14
• /
• 2016

본 논문은 차량 컨트롤러 메인보드 개발에 있어 DC-PLC 방식으로 One-wire만으로 전원 공급 및 접지로 사용하도록 하여 센서 데이터 처리 및 구동 장치를 작동시키는 방법을 제안한다. 복잡한 배선을 피하기 위해 별도의 통신선을 설치하지 않고 기존 배선(wire)를 이용하며, 센서로부터 수집된 데이터를 처리하여 구동 장치를 작동시키는 명령을 전달하도록 설계한다. 본 논문은 제어장치에 들어가는 배선을 간단히 하고 차량 내부 상태를 점검하고 제어하는 기술을 설계하고 구현코자 한다.

• Journal of agriculture & life science
• /
• v.46 no.6
• /
• pp.75-86
• /
• 2012

In this study, eco-friendly hybrid composite boards were manufactured from green tea, 3 kinds of charcoals and wood fiber for developing interior materials to reinforce the strength performances and the functionalities in addition to performances of the hybrid composite boards composed of green tea and wood fiber. The effects for the kind and the component ratio of raw materials on dynamic MOE (modulus of elasticity) were investigated, and static bending strength performances were nondestructively estimated. Dynamic MOEs were highest in the hybrid composite boards composed of green tea, fine charcoal and wood fiber on the whole. However, the difference caused by the kind of charcoals was small. These values decreased with increasing component ratios of green tea and charcoals. The hybrid composite boards using $E_1$ grade urea resin had the higher values than those using $E_0$ grade urea resin, however the difference between them markedly decreased than that of hybrid composite board composed of green tea and wood fiber, and it was found that these values were markedly improved than those of the hybrid composite boards composed of green tea and wood fiber. There were mostly high correlations with significance at 1% level between dynamic MOEs and static bending strength performances, and this means that the static bending strength performances can be estimated from dynamic MOE.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.36C no.10
• /
• pp.17-28
• /
• 1999

In this paper, an ASIC emulation system called ACE (ASIC Emulator) is proposed. It can produce the prototype of target ASIC in a short time and verify the function of ASIC circuit immediately The ACE is consist of emulation software in which there are EDIF reader, library translator, technology mapper, circuit partitioner and LDF generator and emulation hardware including emulation board and logic analyzer. Technology mapping is consist of three steps such as circuit partitioning and extraction of logic function, minimization of logic function and grouping of logic function. During those procedures, the number of basic logic blocks and maximum levels are minimized by making the output to be assigned in a same block sharing product-terms and input variables as much as possible. Circuit partitioner obtain chip-level netlists satisfying some constraints on routing structure of emulation board as well as the architecture of FPGA chip. A new partitioning algorithm whose objective function is the minimization of the number of interconnections among FPGA chips and among group of FPGA chips is proposed. The routing structure of emulation board take the advantage of complete graph and partial crossbar structure in order to minimize the interconnection delay between FPGA chips regardless of circuit size. logic analyzer display the waveform of probing signal on PC monitor that is designated by user. In order to evaluate the performance of the proposed emulation system, video Quad-splitter, one of the commercial ASIC, is implemented on the emulation board. Experimental results show that it is operated in the real time of 14.3MHz and functioned perfectly.