• Therapeutic Science for Rehabilitation
• /
• v.3 no.2
• /
• pp.71-81
• /
• 2014

Objective: The purpose of this study is to ob serve effects of CPM(Continuous Passive Motion) on hand functional and upper-extremity muscular strength rehabilitation for stroke patients. Method: Objects of this study, three patients have the symptoms of hemiplegia due to stroke. These are acute patients, within a 18 months after treatment and correspond in Brunnstrom stage 4~6. This study used single subject (A-B) design for three patients with a stroke and the effect of CPM was measured using Jebsen-Taylor hand function test, Purdue Pegboard test, hand muscular strength test. They received CPM for 3 weeks, 2 per day, 30 minutes for each, total 30 times. Results: Two patients' results of fingertip grip test in hand strength measurements did not change. Results of Jebsen-Taylor hand function test, Purdue Pegboard test and other hand muscular strength test were improved. To validate statistical results nonparametric statistical method, Wilcoxon signed ranks test was performed. P-Values are greater than 0.05 so difference between be fore and after treatment is not statistically significant result. Conclusion: Despite of limitation of short program period and fewer participants, CPM which has been conducted for stroke patients showed the effect on improvement of hand function and muscle strength. This study shows that CPM which is mainly used to treate lower-extremity rehabilitation can be use to improve performance of hand function and strength for patients with stroke.

• The Journal of Korean Society for Radiation Therapy
• /
• v.26 no.1
• /
• pp.37-42
• /
• 2014

Purpose : At the time of the pelvis cancer radiation treatment using the belly board, set-up error is large because of a prone position. In order to improve the reproducibility, we made Vac-lock type belly board. In this study, we attempt to validate its utility. Materials and Methods : We compared belly board and Vac-lock type belly board through the OBI. OBI was performed three times with entire course of treatment and the setup errors in the direction of X axis, Y axis, Z axis were recorded and calculated the distance from the isocenter. Results : X axis, Y axis, Z axis setup errors with existing belly board were 0.32 cm, 0.41 cm, 0.29 cm. The setup errors with the vac-lock type belly board were 0.12 cm, 0.19 cm, 0.17 cm. Further, errors of 0~0.29 cm were increased from 48% to 83% when using VLT belly board. Error of 0.5 cm or more was reduced from 21% to 2%. Conclusion : Vac-lock type belly board is able to maintain the efficacy of existing and create to match the characteristics of the patient. Therefore We think that vac-lock type belly board is very useful in pelvic cancer patients.

• The Journal of Korean Academy of Sensory Integration
• /
• v.21 no.1
• /
• pp.23-33
• /
• 2023

Objective : The purpose of this study is was to find ouetermine whether training to applying vibration stimulation to the biceps brachii of children in the late stages of spasticity hemiplegic cerebral palsy can helps to improve the function of the upper extremity. Methods : This The study was conducted on with three children with cerebral palsy, all between the ages of 13 and 15 years. Among the experimental research methods of used with individual subjects, an AB research design using multiple basic baseline individual experimental studies was used, and vibration stimulation was provided to the paralyzed hand during the intervention period. The An evaluation was conducted before and after each session used to measure the function of the upper extremity using was conducted after each session of the Rapael Smart Board and The Jebsen-Tayler hand function test and the Motor Activity Log (MAL) were conducted before and after the experiment. Results : As a result of measuring the smooth The average score and total scores of for using the Rapael Smart Board to measure the upper extremity function in following each therapeutic session using the Rafale smart pegboard showed that, Subject 3 did not showevidenced a no significant change in the average value, and but Subjects 1 and 2 did showed a significant changes in their average values. All three subjects showed significant changes in the Jepson-Taylor hand function test and in the Motor Activity Log test, as evaluated before and after the intervention. Conclusion : Training The using use of vibration stimulation showed a positive effect on in improving upper limb function and exercise in hemiplegia hemiplegic children with who had little experience on using their hemiplegic side.

• The Journal of the Convergence on Culture Technology
• /
• v.10 no.2
• /
• pp.127-131
• /
• 2024

SW education was conducted for slow youth learners. 6 learners participatd in 8 sessions of an introductory course using several plays and 3 learners who more interested in introductory course participated in deeper course using normal method. After education, we survey and interview from learners, instructors and heads of welfare organizations. Learners showed interest and participated in the fact that they were participating in SW education, which was widely talked about. Learners were found to be more satisfied with introductory course education using play such as board games, and although they initially appeared to participate in unfamiliar learning content with low efficacy, it was observed that their efficacy increased with repetition. Additionally, it was observed that young people with an IQ of 80 or higher had a higher level of interest or interest in SW education than those with an IQ of 80 or lower. we discussed that there were not many opportunities to directly use the SW education content for youth who are slow learners in work or real life. We suggest this should be a focus education on the use of digital media - online meeting apps, office SW etc.- to improve digital literacy for life and work and that research on this should continue.

• The Journal of the Korea Contents Association
• /
• v.9 no.12
• /
• pp.742-749
• /
• 2009

The use of cone-beam computed tomography(CBCT) has been proposed for guiding the delivery of radiation therapy. A kilovoltage imaging system capable of radiography, fluoroscopy, and cone-beam computed tomography(CT) has been integrated with a medical linear accelerator. A standard clinical linear accelerator, operating in arc therapy mode, and an amorphous-silicon (a-Si) with an on-board electronic portal imager can be used to treat palliative patient and verify the patient's position prior to treatment. On-board CBCT images are used to generate patient geometric models to assist patient setup. The image data can also, potentially, be used for dose reconstruction in combination with the fluence maps from treatment plan. In this study, the accuracy of Hounsfield Units of CBCT images as well as the accuracy of dose calculations based on CBCT images of a phantom and compared the results with those of using CT simulator images. Phantom and patient studies were carried out to evaluate the achievable accuracy in using CBCT and CT stimulator for dose calculation. Relative electron density as a function of HU was obtained for both planning CT stimulator and CBCT using a Catphan-600 (The Phantom Laboratory, USA) calibration phantom. A clinical treatment planning system was employed for CT stimulator and CBCT based dose calculations and subsequent comparisons. The dosimetric consequence as the result of HU variation in CBCT was evaluated by comparing MU/cCy. The differences were about 2.7% (3-4MU/100cGy) in phantom and 2.5% (1-3MU/100cGy) in patients. The difference in HU values in Catphan was small. However, the magnitude of scatter and artifacts in CBCT images are affected by limitation of detector's FOV and patient's involuntary motions. CBCT images included scatters and artifacts due to In addition to guide the patient setup process, CBCT data acquired prior to the treatment be used to recalculate or verify the treatment plan based on the patient anatomy of the treatment area. And the CBCT has potential to become a very useful tool for on-line ART.)

• Radiation Oncology Journal
• /
• v.25 no.1
• /
• pp.54-61
• /
• 2007

[ $\underline{Purpose}$ ]: The purpose of this study is to develop a practical method for determining accurate marker positions for prostate cancer radiotherapy using CT images and kV x-ray images obtained from the use of the on- board imager (OBI). $\underline{Materials\;and\;Methods}$: Three gold seed markers were implanted into the reference position inside a prostate gland by a urologist. Multiple digital image processing techniques were used to determine seed marker position and the center-of-mass (COM) technique was employed to determine a representative reference seed marker position. A setup discrepancy can be estimated by comparing a computed $COM_{OBI}$ with the reference $COM_{CT}$. A proposed algorithm was applied to a seed phantom and to four prostate cancer patients with seed implants treated in our clinic. $\underline{Results}$: In the phantom study, the calculated $COM_{CT}$ and $COM_{OBI}$ agreed with $COM_{actual}$ within a millimeter. The algorithm also could localize each seed marker correctly and calculated $COM_{CT}$ and $COM_{OBI}$ for all CT and kV x-ray image sets, respectively. Discrepancies of setup errors between 2D-2D matching results using the OBI application and results using the proposed algorithm were less than one millimeter for each axis. The setup error of each patient was in the range of $0.1{\pm}2.7{\sim}1.8{\pm}6.6\;mm$ in the AP direction, $0.8{\pm}1.6{\sim}2.0{\pm}2.7\;mm$ in the SI direction and $-0.9{\pm}1.5{\sim}2.8{\pm}3.0\;mm$ in the lateral direction, even though the setup error was quite patient dependent. $\underline{Conclusion}$: As it took less than 10 seconds to evaluate a setup discrepancy, it can be helpful to reduce the setup correction time while minimizing subjective factors that may be user dependent. However, the on-line correction process should be integrated into the treatment machine control system for a more reliable procedure.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.7 no.2
• /
• pp.205-213
• /
• 2002

This paper deals with the implementation of three-phase VSI systems which can control the power regenerated from DC bus line to AC supply. The overall system consists of the line-to-line voltage and line current sensors, an actual power calculator using d-q transformation method, a complex power controller with PI control scheme, a gating signal generator for modified ｑ-conduction mode, a DPLL for frequency followup, and Power circuits. Control board is constructed by using a 32-bit DSP TMS32C32, two EFLDs , six ADCs, and a DAC. To verify the performance of the proposed system, we designed and constructed the propotype with the power rating of 5kVA at AC 220V. Experimental results show that the regenerated active power is well controlled to its command vague and the regenerated reactive power still remained at nearly zero through all operating modes.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.7
• /
• pp.1283-1289
• /
• 2016

Electrical energy is the essential resource for modern society. Recently, the demand for power was significantly increased. Increase of power demand has lead to a decrease in the power quality. Power quality in modern society has been an important factor that can cause a major problem throughout the home and general industry. Therefore, we need a system for preventing the power quality problems. To avoid power issues, it is important that the measurement of the power quality and initial response. In this paper, we propose real-time power quality measurement system and harmonics monitoring system. We design the system using DM240001 board include dsPIC33FJ256GP710A of microchip. This system can adapt three-phase three-wire system. And optimized the algorithm, we can measure momentary changes of the power system. In addition, designed system can measure harmonics distortion like to VTHD, ITHD and ITDD for 31th harmonics.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.2
• /
• pp.86-89
• /
• 2018

This paper introduces a ZigBee network-based four-lane lap time measurement system that can be set up for short-distance races. The instructions "Ready-Set-Go" can be announced at the entry point node when the start button is pushed, and foot switches installed at the exit point node can be stepped on by the runner for lap time measurement of the race. The start and exit point nodes are connected to a ZigBee network to communicate time synchronization packets. The exit point node maintains synchronized local time within 10 ms at most. The system does not need expensive measurement equipment and provides lap time recording in a more convenient manner than conventional lap time measurement methods.

• The Journal of the Korea Contents Association
• /
• v.8 no.1
• /
• pp.143-151
• /
• 2008

In this paper, we have implemented a ubiquitous healthcare system that can measure and check human's health in anytime and anywhere. The implemented prototype are composed of both front-end and back-end. The front-end have several groups: environment sensor group such as temperature, humidity, photo, voice sensor, health sensor group such as blood pressure, heart beat, electrocardiogram, spo2 sensor, gateway for wired/wireless communication, and RFID reader to identify personal. The back-end has a serial forwarder to propagate measurment results, monitor program, and medical information server The implemented sensor node constructs a sensor network using the Zigbee protocol and is ported the tinyOS. The data gathering base node is linux-based terminal that can transfer a sensed medial data through wireless LAN. And, the medical information server stores the processed medical data and can promptly notify the urgent status to the connected medical team. Through our experiments, we've confirmed the possibility of ubiquitous healthcare system based on sensor network using the Zigbee.