• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.25 no.3
• /
• pp.147-153
• /
• 2013

There exist various types of the WEC (Wave Energy Converter), and among them, the point absorber is the most popularly investigated type. However, it is difficult to find examples of systematically measured data analysis for the design of the point absorber type of power buoy in the world. The study investigates the wave load acting on the point absorber type resonance power buoy wave energy extraction system proposed by Kweon et al. (2010). This study analyzes the time series spectra with respect to the three-year wave data (2002.05.01~2005.03.29) measured using the pressure type wave gage at the seaside of north breakwater of Hupo harbor located in the east coast of the Korean peninsula. From the analysis results, it could be deduced that monthly wave period and wave height variations were apparent and that monthly wave powers were unevenly distributed annually. The average wave steepness of the usual wave was 0.01, lower than that of the wind wave range of 0.02-0.04. The mode of the average wave period has the value of 5.31 sec, while mode of the wave height of the applicable period has the value of 0.29 m. The occurrence probability of the peak period is a bi-modal type, with a mode value between 4.47 sec and 6.78 sec. The design wave period can be selected from the above four values of 0.01, 5.31, 4.47, 6.78. About 95% of measured wave heights are below 1 m. Through this study, it was found that a resonance power buoy system is necessary in coastal areas with low wave energy and that the optimal design for overcoming the uneven monthly distribution of wave power is a major task in the development of a WEF (Wave Energy Farm). Finding it impossible to express the average spectrum of the usual wave in terms of the standard spectrum equation, this study proposes a new spectrum equation with three parameters, with which basic data for the prediction of the power production using wave power buoy and the fatigue analysis of the system can be given.

• Journal of Global Scholars of Marketing Science
• /
• v.17 no.3
• /
• pp.83-108
• /
• 2007

Since the 1992 UN Conference for Environment and Development held in Rio de Jaineiro, Sustainable Development has become the global thesis. More than 170 countries signed the Agenda 21 for the sustainable action plan, and adopted the sustainability concept as the key concept of dealing with the environmental, social, ethical, and economic problem. Sustainability is one of the main marketing challenges in the 21st century. By integrating social and ecological criteria, marketing may can make valuable contributions to sustainable development. Regarding the sustainability marketing, it is difficult to find the domestic marketing research on the thesis of sustainable development, and this is the definite evidence that the Korean marketing researchers do not realize the importance of the thesis of sustainable development which is internationally suggested as the new paradigm of change. The purpose of this study is to build the conceptual background and explore the research direction in order to introduce and adopt the concept of sustainable development in the domestic marketing research field. The present paper proposes a comprehensive conception of sustainability marketing, defined by six step: analysis of social-ecological problems; analysis of consumer behavior; normative sustainability marketing; strategic sustainability marketing; instrumental sustainability marketing; and transformative sustainability marketing. The aim of the paper are to clarify the concept of sustainability marketing. To accomplish this research purpose we discuss the sustainable development which is the conceptual background of sustainability marketing, analyze the characteristics of the sustainability marketing, and finally summarize the research results and present the suggestions for further research. Sustainability marketing embraces the idea of sustainable development, a development that meets the needs of the present without compromising the ability of future generation to meet their own needs. Sustainability Marketing goes beyond conventional marketing thinking. If marketing is about satisfying customer needs and building profitable relationships with customers, sustainability marketing may be defined as building and maintaining sustainable relationships with customers, the social environment and natural environment. By creating social and environmental value, sustainability marketing tries to deliver and increase customer value. Sustainability Marketing aims at creating customer value, social value and environmental value. Sustainability marketing integrates social and ecological criteria into the whole process of marketing, and can be differentiated in six steps: (1) Analysis of the social and ecological problems, generally and specifically with respect to products which satisfy customer needs and wants; (2) Analysis of customer behavior with special aspect to social and ecological concerns; (3) Corporate commitments to sustainable development in the mission statement, development of sustainability visions, formulation of sustainable principles and guideline, setting of socio-ecological marketing objectives and goals (normative aspects of sustainability marketing); (4) Sustainability segmentation, targeting and positioning, and timing of market entry(strategic aspects of sustainability marketing); (5)Integration of social and ecological criteria into the marketing-mix, i.e. products, services and brands, pricing, distribution and communication(instrumental aspects of sustainability marketing); (6) Participation in public and political change processes, which transform existing institutions towards sustainability(transformative aspects of sustainability marketing). The first two steps begin with an analysis of the company situation. In sustainability marketing it is crucial not just to know consumer needs and wants, but also to find out about the ecological and social problems of products along their whole life cycle. The intersection of socio-ecological problems and consumer wants sets the ground for sustainability marketing. Step three to five describe the implementation of sustainability marketing. Social and ecological criteria are fully integrated into the mission statement, strategies and marketing-mix. Step six is one of the specifics of sustainability marketing. It is about the commitment of company to sustainable development and their active participation in public and political processes in order to change the existing framework in favor of sustainability.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.6 no.2
• /
• pp.81-92
• /
• 2001

According to analyses of high-resolution seismic profiles (air gun, sparker, and SBP) and a deep-drill core(YSDP 105) in the mid-eastern Yellow Sea, stratigraphic and geoacoustic models have been established and seismo-acoustic modeling has been fulfilled using ray tracing of finite element method. Stratigraphic model reflects seismo-, litho-, and chrono-stratigraphic sequences formed under a significant influence of Quaternary glacio-eustatic sea-level fluctuations. Each sequence consists of terrestrial to very-shallow-marine coarse-grained lowstand systems tract and tidal fine-grained transgressive to highstand systems tract. Based on mean grain-size data (121 samples) of the drill core, bulk density and P-wave velocity of depositional units have been inferred and extrapolated down to a depth of the recovery using the Hamilton's regression equations. As goo-acoustic parameters, the 121 pairs of bulk density and P-wave velocity have been averaged on each unit of the stratigraphic model. As a result of computer ray-tracing simulation of the subsurface strata, we have found that there are complex ray paths and many acoustic-shadow zones owing to the presence of irregular layer boundaries and low-velocity layers.

• Korean Journal of Food Science and Technology
• /
• v.32 no.4
• /
• pp.755-762
• /
• 2000

Physicochemical properties of commercial sweet potato starches manufactured by 7 different companies were investigated in comparison with corn and potato starches. Crude ash and protein content varied from 0.36 to 1.02%, and from 0.04 to 0.14% based on dry weight, respectively. The protein contents were relatively smaller than that of corn or potato starch. But whiteness of the sweet potato starches was less than that of corn or potato starch. Mean diameter of the sweet potato starch granules varied from 14.23 to $21.08\;{\mu}m$ depending on the company and all sweet potato starches showed bimodal size distributions. Pasting viscosity measured by Rapid Viscoanalyzer(RVA) also showed variations among the starches of different companies. The starch from D company in Korea had the lowest pasting temperature$(74.00^{\circ}C)$ whereas the starch from a phillippine company(P) did the highest one$(80.35^{\circ}C)$. The peak viscosity of sweet potato starches was higher than that of corn starch but lower than that of potato starch. The D company starch also showed the highest peak viscosity(2283 cp) among the starches tested. Paste breakdown by hot shearing ranged from 524 cp (S company) to 1279 cp (HL company). Textural properties of the starch gels appeared significantly different among the starches of different manufacturers. The greatest hardness of the gel was $137.90\;g_{f}$ at 1 day storage whereas the lowest value was $31.53\;g_{f}$. Except the starches from 2 companies (P and S), the sweet potato starches formed very soft and weak gels. P or S company starches formed the gels similar to potato starch. Syneresis by freeze-thawing treatments appeared less for sweet potato starch gels than that for corn starch gels, but greater than that for potato starch gel. The overall properties of the sweet potato starches varied by the manufacturing companies, and ranged between those of corn and potato starches.

• Journal of Intelligence and Information Systems
• /
• v.26 no.1
• /
• pp.23-45
• /
• 2020

Big data is creating in a wide variety of fields such as medical care, manufacturing, logistics, sales site, SNS, and the dataset characteristics are also diverse. In order to secure the competitiveness of companies, it is necessary to improve decision-making capacity using a classification algorithm. However, most of them do not have sufficient knowledge on what kind of classification algorithm is appropriate for a specific problem area. In other words, determining which classification algorithm is appropriate depending on the characteristics of the dataset was has been a task that required expertise and effort. This is because the relationship between the characteristics of datasets (called meta-features) and the performance of classification algorithms has not been fully understood. Moreover, there has been little research on meta-features reflecting the characteristics of multi-class. Therefore, the purpose of this study is to empirically analyze whether meta-features of multi-class datasets have a significant effect on the performance of classification algorithms. In this study, meta-features of multi-class datasets were identified into two factors, (the data structure and the data complexity,) and seven representative meta-features were selected. Among those, we included the Herfindahl-Hirschman Index (HHI), originally a market concentration measurement index, in the meta-features to replace IR(Imbalanced Ratio). Also, we developed a new index called Reverse ReLU Silhouette Score into the meta-feature set. Among the UCI Machine Learning Repository data, six representative datasets (Balance Scale, PageBlocks, Car Evaluation, User Knowledge-Modeling, Wine Quality(red), Contraceptive Method Choice) were selected. The class of each dataset was classified by using the classification algorithms (KNN, Logistic Regression, Nave Bayes, Random Forest, and SVM) selected in the study. For each dataset, we applied 10-fold cross validation method. 10% to 100% oversampling method is applied for each fold and meta-features of the dataset is measured. The meta-features selected are HHI, Number of Classes, Number of Features, Entropy, Reverse ReLU Silhouette Score, Nonlinearity of Linear Classifier, Hub Score. F1-score was selected as the dependent variable. As a result, the results of this study showed that the six meta-features including Reverse ReLU Silhouette Score and HHI proposed in this study have a significant effect on the classification performance. (1) The meta-features HHI proposed in this study was significant in the classification performance. (2) The number of variables has a significant effect on the classification performance, unlike the number of classes, but it has a positive effect. (3) The number of classes has a negative effect on the performance of classification. (4) Entropy has a significant effect on the performance of classification. (5) The Reverse ReLU Silhouette Score also significantly affects the classification performance at a significant level of 0.01. (6) The nonlinearity of linear classifiers has a significant negative effect on classification performance. In addition, the results of the analysis by the classification algorithms were also consistent. In the regression analysis by classification algorithm, Naïve Bayes algorithm does not have a significant effect on the number of variables unlike other classification algorithms. This study has two theoretical contributions: (1) two new meta-features (HHI, Reverse ReLU Silhouette score) was proved to be significant. (2) The effects of data characteristics on the performance of classification were investigated using meta-features. The practical contribution points (1) can be utilized in the development of classification algorithm recommendation system according to the characteristics of datasets. (2) Many data scientists are often testing by adjusting the parameters of the algorithm to find the optimal algorithm for the situation because the characteristics of the data are different. In this process, excessive waste of resources occurs due to hardware, cost, time, and manpower. This study is expected to be useful for machine learning, data mining researchers, practitioners, and machine learning-based system developers. The composition of this study consists of introduction, related research, research model, experiment, conclusion and discussion.

• The Journal of Korean Society for Radiation Therapy
• /
• v.17 no.2
• /
• pp.133-140
• /
• 2005

Purpose : This test is designed to identify the validity of treatment plan by implementing real-time dosimetry by means of dose that is absorbed into PTV and OAR when preparing doses of 3D and POP plans. Materials and Methods : In treatment. error can be calculated be comparing Exp. Dose with the actual dose, which has been converted from 'the reading value obtained by placing diode detector on the area to be measured'. Same test can be repeated using Alderson-Rando phantom. Results : Errors were found: A patient(POP plan): 197.6/199=-1.2%, B patient(3D-plan): 199.9/198.7=+0.6%, C patient: 196/200=-1.5%. In addition, considering the resulted value of measuring OAR besides target-dose for C patient showed 96/200, representing does of 47%, the purpose of protection was judged to be duly accomplished. Also it was acknowledged the resulted value of -3.7% met the targeted dose within the range of ${\pm}5%$. Conclusion : Aimed for identifying the usefulness of pre-treatment dose measurement using diode detector, this test was useful to evaluate the validity of curing because it resulted in the identification of category to be protected as well as t dose. Moreover, it is thought to have great advantage in ascertaining the dose of target, dose of which is not calculated yet. Similar to L-gram before treatment, this test is thought to be very effective so that it can bring great advantages in the aspects such as validity of curing method and post-treatment plan as well.

• Korean Security Journal
• /
• no.22
• /
• pp.231-258
• /
• 2010

A study apartment house inhabitants of to, crime prevention effort is done satisfaction analysis and that deduce design plan of CPTED that can overcome safe life space embodiment and criminal fear from crime in Juminin viewpoint through atomize group's interaction by background fantast. Is positive because factor analysis wave and satisfaction index of deduce universe (Total group) 8 factor are presented more than all 0, and quite was expose by level that is worth accommodating. Satisfaction index of The secondary design group (Group1) 8 factor is positive because is presented more than all 0, and mechanical access control, mechanical surveillance is level that is worth accommodating quite, and level that is proper in remainder 6 dimension appear. Can know that 1 The secondary design group(Group2) is expose by level that satisfaction characteristic of 8 factor can be presented more than all 0 and appeared positively, and accommodate quite in all dimensions. Result that analyze Two-way ANOVA satisfaction difference of environment design of group by satisfaction of the primary and the secondary design group is high in 8 all dimensions of CPTED, and satisfaction by appeared satisfaction high in group less than natural access control, 2 years of natural surveillance, and reciprocal action effect that go with group is high satisfaction in 2 years low in The secondary design group more than the primary and the secondary design group of systematic access control and natural access control, and the primary and the secondary design group appeared high in subgroup of 2 remainders. Satisfaction difference by group by crime prevention effort satisfaction of the primary and the secondary design group is high in 8 all dimensions of CPTED, and satisfaction difference by crime prevention effort appeared satisfaction high in 'A prize' group to The secondary design group, and reciprocal action efficiency is high in 'A prize' group in The secondary design group more than the primary and the secondary design group in mechanical access control, systematic access control, natural access control, territoriality reinforcement, and satisfaction of 'Between' and 'Very' group appeared high in the primary and the secondary design group.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.4
• /
• pp.144-159
• /
• 2014

Techniques for making a single panoramic image using multiple pictures are widely studied in many areas such as computer vision, computer graphics, etc. The panorama image can be applied to various fields like virtual reality, robot vision areas which require wide-angled shots as an useful way to overcome the limitations such as picture-angle, resolutions, and internal informations of an image taken from a single camera. It is so much meaningful in a point that a panoramic image usually provides better immersion feeling than a plain image. Although there are many ways to build a panoramic image, most of them are using the way of extracting feature points and matching points of each images for making a single panoramic image. In addition, those methods use the RANSAC(RANdom SAmple Consensus) algorithm with matching points and the Homography matrix to transform the image. The SURF(Speeded Up Robust Features) algorithm which is used in this paper to extract featuring points uses an image's black and white informations and local spatial informations. The SURF is widely being used since it is very much robust at detecting image's size, view-point changes, and additionally, faster than the SIFT(Scale Invariant Features Transform) algorithm. The SURF has a shortcoming of making an error which results in decreasing the RANSAC algorithm's performance speed when extracting image's feature points. As a result, this may increase the CPU usage occupation rate. The error of detecting matching points may role as a critical reason for disqualifying panoramic image's accuracy and lucidity. In this paper, in order to minimize errors of extracting matching points, we used $3{\times}3$ region's RGB pixel values around the matching points' coordinates to perform intermediate filtering process for removing wrong matching points. We have also presented analysis and evaluation results relating to enhanced working speed for producing a panorama image, CPU usage rate, extracted matching points' decreasing rate and accuracy.

• Journal of Global Scholars of Marketing Science
• /
• v.2
• /
• pp.17-37
• /
• 1998

중소기업간 협력 활동은 사업의 전체 혹은 일정 부분에 대하여 분업이나 협업의 관계를 맺는 공동사업의 형태로 나타난다. 기업간 연결의 강도에 따라 기업들간에 형성되는 분업과 협업의 관계를 시장형, 중간조직형, 위계조직형으로 구분할 때, 중소기업간 공동사업은 중간조직형에 속하는 일종의 기업간 네트워크라고 볼 수 있다. 물론 네트워크형의 협력관계를 추진하는 방식도 업무제휴, 지분제휴, 합작투자, 컨소시엄 등으로 다양하다. 그러나 완전한 자본적 통합에 따른 위계적 조직과는 달리 참여기업들이 독립성을 유지하면서, 네트워크 밖의 기업에 대해 경쟁우위를 확보하기 위해 형성한다는 공통점을 가지고 있다. 기업간 협력관계를 통해 참여 기업들이 얻을 수 있는 혜택에 관한 기존연구들은 크게 두 가지로 나누어 볼 수 있다. 하나는 기업의 생산함수를 중심으로 그 이점을 파악하는 것이고 다른 하나는 관계의 종류에 따라 기업간 거래관계를 관리하는 소위 거래비용의 효율성을 중심으로 혜택을 파악하는 접근방법이다. 전자의 접근방법을 따를 때, 기업간 협력의 근본 유인은 규모의 경제(혹은 비경제), 범위의 경제, 집적의 경제, 구도의 경제 등이 협력관계에서 발생하는 혜택의 근본 원천이다. 기술과 제도의 발전, 시장과 경쟁환경의 변화에 따른 기업간 협력의 필요성은 갈수록 증대되고 있다. 소비자들의 요구는 매우 개성화 다양화되고 종합화되는 추세이다. 더불어 기술개발의 비용이 큰 폭으로 증가하고 있으며, 경쟁의 격화로 기술 및 제품의 진부화도 급속도로 이루어지고 있다. 세계화 상품고도화 서비스산업화 정보화 등으로 특징지워지는 새로운 경쟁환경 아래에서 장기적으로 기업의 경쟁력을 향상시키기 위해서는 시장중심적인 관점에서 형성된 기업간 전략적 연계를 바탕으로, 정보의 집적을 통해 다양한 생산성 향상 혹은 관계효율성 향상의 경제를 추구하는 것이 필연적 전제 조건이 되었다. 기업간 경쟁보다는 최종제품의 생산과 판매를 위해 형성된 기업네트워크간의 경쟁이 중시되는 시대인 것이다. 동서간(東西間) 중소기업(中小企業)의 협력(協力)을 새삼스럽게 논의하는 것은 다분히 정치적이라는 느낌을 준다. 경제적인 관점에서 실익이 있음에도 불구하고 동서간 중소기업의 협력이 이루어지지 못하고 있다면, 그 이유는 기업정보의 수집과 유통상의 문제이거나 문화나 기업관행에 대한 잘못된 선입관에서 비롯된 관계 관리비용 계산상의 문제일 것이다. 현실적으로 이 가능성은 매우 낮다. 산업의 발전 정도나 연관성에 있어서 동서축보다는 남북축을 따라 기업간 협력이 이루어질 수 밖에 없는 우리나라의 현재 상황이 동서간보다는 남북간 경제교류를 유도하고 있는 것이다. 동서간 중서기업 협력체제의 구축에 대한 논의가 본질적으로 정치적 관심에서 비롯되었다는 전제 하에, 구축의 방안을 논의하고자 한다. 경제적으로도 타당하면서 정치적으로 관심을 유발할 수 있는 협력체제 구축방안으로, 기업간 네트워크의 조직 주체로서 최근에 논의되고 있는 새로운 형태의 마케팅회사를 동서간에 공동으로 설립할 것을 제안한다. 영구 지속적 공동사업관계보다는 프로젝트별 공동사업을 전제로 기업들 사이의 효과적인 네트워크를 형성함으로써 일종의 가상적 기업을 결성할 필요가 있다. 이러한 기업간 네트워크 형성의 실행주체가 될 수 있는 새로운 마케팅 전문기업의 형태로는 공동회사(空洞會社)(hollow company), 종합상사(綜合商社)(General Trading Company), 거래형 마케팅회사(Marketing Exchange Company), 변환형 마케팅회사(Marketing Coalition Company) 등을 들 수 있다. 양 지역에서는 소비자환경과 기술환경의 특성 및 양 지역의 경제에 대한 파급효과를 고려하여 가장 적합한 마케팅회사의 유형은 선택하여 육성하고, 이를 중심으로 강력한 양 지역 및 다른 지역에 입지한 기업간의 네트워크를 구축하여야 한다. 마케팅회사를 설립하고 완전한 마케팅 서비스를 제공할 수 있도록 육성하기 위해서는 많은 투자가 필요하다. 마케팅회사의 핵심기능 분야인 금융부문, 정보부문, 영업조직 등은 모두 막대한 투자를 필요로하는 기능영역이다. 정보부문은 기술의 발전과 범세계적인 정보관련기관과의 제휴를 통해 독자적인 구축이 어느 정도 가능하나, 영업조직의 구축을 위해서는 기존업체와의 연대가 필수적인 것으로 판단된다. 지속적으로 효과적인 기업간 네트워크를 형성하고 유지하기 위해서는 또한 기업간 관계를 관리하는 방식과 제도 및 수단에 대한 연구가 필요하다. 양 지역 산 학 관의 공동노력을 통해서 새로운 경제 환경에 가장 적합한 기업 형태로 제시된 바 있는 마케팅 전문회사 중심의 기업간 네트워크를 성공적으로 구축한다면, 양 지역 및 국가 경제의 지속적인 동력원이 될 수 있을 것이다

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.36 no.5
• /
• pp.394-406
• /
• 1991

It was proved that cold tolerance of rice plants at the young microspore stage was affected by water temperature and nitrogen application from the spikelet differentiation stage to the young microspore stage, and this mechanism could be explained in the point of view of pollen developmental physiology. The cold tolerance of rice plants at the young microspore stage was severely affected by water temperature (Previous water temperature) and nitrogen application(Previous nitrogen application) from the spikelet differentiation stage to the spikelet differentiation stage. Although the duration is only 10 days or so from the spikelet differentiation stage to the young microspore stage, these days are very important period to confirm the cold tolerance of rice plants at the young microspore stage. The higher previous water temperature up to $25^{\circ}C$ and the deeper previous water depth up to 10cm caused the more cold tolerance of rice plants. Water irrigation of 10cm before the cretical stage showed lower cool injury than that of water irrigation of 20cm during the critical stage. The preventive effect of cool injury by combined treatment of the deep water irrigation before and during the critical stage was not additive but synergistic. The cold tolerance of rice plants grown in previous heavy nitrogen level was rapidly decreased when nitrogen content of leaf blade at the young microspore stage was excessive over the critical nitrogen level. Nitrogen content of leaf blade at the changing point of cold tolerance was estimated as about 3.5% for Japonica cultivars and about 2.5% for Indica x Japonica cultuvars. It is considered that these critical nitrogen contents of leaf blade can be used as a index of the safe critical nitrogen level for the preventive practices to cool injury. It was summarized that increase of engorged pollens per anther by high previous water temperature resulted from the increase of number of differentiated microspores per anther, otherwise, the increase of engorged pollens by the decrease of previous nitrogen level was caused by the decrease of the number of aborted microspores per anther.