• Journal of the Korea institute for structural maintenance and inspection
• /
• v.7 no.3
• /
• pp.133-138
• /
• 2003

As concrete structures are heated, thermal strain can be developed. Because of the boundary conditions, the thermal stress may be arisen. Thermal strain and temperature were measured simultaneously using an optical fiber sensor. Fiber Bragg Grating Sensor(FBG sensor) was used in the measurement. Because it can measure the strains more than two points with one line, it was possible to measure both thermal strain and temperature with one line. To compare data measured by FBG sensor, strain and temperature were measured using strain gauge and thermocouple. The FBG sensor could measure the strain under the temperature greater than $60^{\circ}C$ but strain gauge couldn't. Both the FBG temperature sensor and thermocouple could measure the temperature and the results are related each other linearly.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.2
• /
• pp.59-66
• /
• 2002

In this paper, we present the simulataneous monitoring of the strain and temperature during cures f various composite laminates using fiber Bragg grating/extrinsic Fabry-Perot interferometric (FBG/EFPI) hybrid sensors. Three types of graphite/epoxy composite were used : a undirectional laminate, a symmetric cross-ply laminate, and a fabric laminate. Two FBG/EFPI hybrid sensors were embedded in each laminate at different directions and different locations. We performed the real time monitoring of fabrication strains and temperatures at two points within the composite laminates during cure process in an autoclave. Throuhg these experiments, FBG/EFPI sensors proved to be an efficient choice for smart cure monitoring of composite structures.

• Journal of Sensor Science and Technology
• /
• v.10 no.3
• /
• pp.163-172
• /
• 2001

Fiber optic BOTDA (Brillouin Optical Time Domain Analysis) sensor was developed to be able to detect intrusion effect through several ten kilometer optical fiber. Fiber optic BOTDA sensor was constructed with 1 laser diode and 2 electro-optic modulators. The intrusion detection experiment was peformed by the strain inducing set-up installed on an optical table to simulating an intrusion effect. In the result of this experiment, the intrusion effect was well detected as the distance resolution of 3 m through the fiber length of about 4.81 km during 1.5 seconds.

• Journal of IKEEE
• /
• v.20 no.4
• /
• pp.454-458
• /
• 2016

Generally, fix the end of the fabric to pin with the fabric tenter process. At this time, the pin fixing part of the fiber fabric bulges and deforms. The deformation of the textile causes deterioration of the quality of the textile product. Detection of fiber fabric selvage portion is always required in the processing of the fabric. This research is a non-contact sensor for sensing fiber selvage. In this study, Developed a non-contact fabric selvage detecting sensor for use in automatic selvage cutting system. For the production of the fabric selvage detecting sensor prototype it was produced by placing thirty two sensor 2.5 mm interval. The selvage sensor system experimentally confirmed that actual selvage detection is possible.

• Proceedings of the KIEE Conference
• /
• 2001.07c
• /
• pp.1360-1362
• /
• 2001

본 논문에서는 다이어프램을 세라믹을 사용하여 2차 변환 소자로 금속 스트레인 게이지 대신에 thick film piezoresistor를 이용한 후막 압력센서에 관한 연구이다. 다이어프램의 미소 변형을 후막의 비저항 변화로 검출하는 압저항 효과를 이용하는 방식이다. 종래의 압력센서와 비교하여 크리프 현상이 적고, 안정성이 우수한 특징을 갖고 있다. 또한 저항선이나 박 게이지의 게이지율이 3$\sim$5 인 것이 비하면 후막저항을 사용한 경우, 약 15$\sim$20정도의 높은 게이지율을 얻을 수 있어서 측정범위를 넓게 할 수 있으며, 후막공정의 스크린 프린팅을 통한 자동화는 수율의 향상과 저 가격화를 실현할 수 있다. 또, 후막 저항형 압력센서는 두 개의 저항이 다이어프램의 중앙 부근에 위치하며, 나머지 두 개의 저항은 가장자리에 위치시킴으로써 미소 변형에서도 저항값의 변화를 읽을 수 있도록 하였고, 휘스톤 브리지의 연결 도체부는 Pt를 주성분으로 하는 conductive paste(DHC7085)를 사용하였다. 이렇게 설계.제작된 압력 센서를 지지대에 고정시킨 후 캡슐에 넣고 감도, 선형성, 히스테리시스 그리고 온도특성 등을 고찰하였다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.25 no.5
• /
• pp.343-349
• /
• 2005

In this research, the fiber Bragg grating sensors with long gauge for displacement measurement in the long distance is developed and tested. The sensors show an accuracy and a capability for displacement measurement oin long distance. Monitoring using static logger of system of FBG sensor with strained optical fiber shows the capability of measurement in the harsh environment such as strong wind. Measurement of long distance displacement by optical fiber sensor if use $250{\mu}m$ optical fiber and impose some strong pre-tension shows possibility in monitoring of nuclear containment structure.

• Composites Research
• /
• v.14 no.5
• /
• pp.12-19
• /
• 2001

In aircraft composite structures, structural defects such as matrix cracks, delaminations and fiber breakages are hard to detect if they are breaking out in operating condition. Therefore, to assure the structural integrity, it is desirable to perform the real-time health monitoring of the structures. In this study, a fiber optic sensor was applied to the composite beams to monitor failure and strain in real-time. To detect the failure signal and strain simultaneously, laser diode and ASE broadband source were applied in a single EFPI sensor using wavelength division multiplexer. Short time courier transform and wavelet transform were used to characterize the failure signal and to determine the moment of failure. And the strain measured by AEFPI was compared with the that of strain gage. From the result of the tensile test, strain measured by the AEFPI agreed with the value of electric strain gage and the failure detection system could detect the moment of failure with high sensitivity to recognize the onset of micro-crack failure signal.

• Composites Research
• /
• v.15 no.4
• /
• pp.32-36
• /
• 2002

Recently, the applications of composite materials become broader to civil engineering as well as mechanics and aerospace engineering. Cracks on the civil structures like bridges can cause stress concentration, which induces Peak splitting of fiber Bragg grating sensor and it makes strain measurements difficult. In this study, 4-point bending test of concrete beam with initial crack reinforced by composite patch was conducted in order to verify the effects of the stress concentration on the peak signal of FBG sensor and a novel method for signal maintenance.

• Proceedings of the Korean Information Science Society Conference
• /
• 2012.06d
• /
• pp.260-261
• /
• 2012

스마트 환경에 관심이 높아지면서 무선 센서 네트워크를 이용한 유비쿼터스 시스템을 실생활에 활용하려는 노력이 이어지고 있다. 무선 센서 네트워크는 무선 통신으로 정보를 수집하기 때문에 실생활에 적용할 경우 사생활 정보가 유출될 가능성을 가진다. 본 논문은 데이터 전송 과정에서 데이터가 유출되었을 때, 원본 데이터로의 해독을 어렵게 하는 해시 알고리즘을 제안한다. 제안하는 알고리즘은 단 방향 해시 함수인 MD5를 변형한 TinyMD5를 이용하여 데이터를 변환하고, MD5를 변형하면서 발생하는 해시 값 충돌 문제를 해결할 수 있는 기법을 추가하였다. 제안하는 알고리즘의 우수성을 보이기 위해 기존의 기법과 시뮬레이션을 통해 성능을 비교 평가하였다. 성능 평가 결과, 제안하는 알고리즘은 통신 에너지를 기존 알고리즘의 평균 29%만을 소모하였다.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2010.05a
• /
• pp.105-106
• /
• 2010

FBG temperature sensor and strain sensor has been used to monitoring shrinkage and temperature of concrete cable-stayed girder bridge site in its casting early age, The monitoring method using this study is expected to used a practical method.