• Bulletin of the Society of Naval Architects of Korea
• /
• v.61 no.1
• /
• pp.16-29
• /
• 2024

2014년 4월 18일 오전 8시 48분경 전라남도 병풍도 인근 해역에서 세월호는 전복된 후 침몰하였다. 사고 당시 이 배에는 승객 443명과 선원 및 승무원 33명 모두 476명이 타고 있었고, 이 중 미수습자 5명을 포함하여304명이 생명을 잃었다. 그 동안 공식적인 사고원인 규명활동이 꾸준히 진행되어 이 사고의 원인을 규명하기 위한 조사가 네 차례 있었다. 하지만 아직까지 사고 원인이 무엇인지 명쾌하게 밝혀지지 않고 있다. 이 글에서는 먼저 그동안 있었던 네 차례의 공식적인 세월호 사고원인 규명활동을 정리하였다. 가장 먼저 사고원인 규명활동을 전개한 해양안전심판원 특별조사부는 2014년 사고 직후부터 그해 12월까지 활동하였다. 특별조사부 최종보고서에는 화물의 과적과 평형수 적재 부족으로 인한 선박복원성 기준 미달, 타각의 대각도 조타와 장시간 유지로 인한 부적절한 조타, 화물의 부실한 고박으로 인한 화물의 이동, 수밀문의 관리 부실로 인한 조기 침수와 비상대피장소(muster station)로의 승객대피 조치 미이행을 사고의 원인으로 들고 있다. 2015년 3월부터 2016년 6월까지 활동한 4·16세월호참사 특별조사위원회(특조위)는 '4·16 세월호 참사 특별 조사위원회 청산 백서'만을 간행하고 최종보고서를 제출하지 못한 채 활동을 종료하였다. 세월호 선체조사위원회(선조위)는 2017년 4월부터 2018년 8월까지 활동하였다. 선조위는 세월호 사고원인 규명을 위한 다른 기구에 비해 위원의 구성도 균형이 있었고, 직권사건 위주의 조사방법도 적절하였다. 또한 조타기와 조타 과실 여부, 급선회 항적 및 횡경사와 핀안정기의 물리적 손상에 관한 용역을 국내 여러 기관에 발주하였다. 뿐만 아니라 다양한 해양사고 원인규명 용역에 참여한 실적이 있는 영국의 기술용역회사인 Brookes Bell에 급선회와 빠른 침몰의 원인 조사를 요청하였다. 아울러 세계에서 가장 활발히 수조실험을 수행하고 있는 상업 연구소인 네덜란드의 MARIN에 수조시험과 시뮬레이션도 의뢰하였다. 하지만 아쉽게도 선조위는 서로 다른 사고 원인을 주장하는 두 권의 종합보고서를 간행하였다. 종합보고서로 '내인설' 종합보고서[6]는 타기 솔레노이드 밸브의 고착으로 시작된 급선회를 사고의 직접 원인으로 지목하고 있다. 하지만 '열린안' 종합보고서[7]에서는 수중체와의 충돌을 직접적인 사고 원인으로 밝히고 있다. 마지막으로 가습기살균제 사건과 4·16세월호 참사 특별조사위원회(사참위)가 2019년 3월부터 2022년 9월까지 활동하였다. 사참위는 위원으로 조선해양공학과 항해학 전문가가 포함되어 있지 않아 세월호의 사고원인 규명활동을 효과적으로 수행하기에는 적절하지 못하였다. 사참위는 주로 조타장치 고장에 따른 세월호 전타 선회현상 검증, 세월호 변형 손상부의 확인 및 원인 조사와 세월호 횡경사 원인과 침수과정 분석을 직권 과제로 추진하였다. 또한 네덜란드 MARIN에 자유항주시험을 추가로 의뢰하였으며, 핀란드의 NAPA group에도 복원성 계산과 침수해석을 의뢰하였다. 사참위는 선조위의 두 가지 사고원인에 대해 '내인설'의 솔레노이드 밸브 고착은 사고원인일 가능성이 매우 낮고, '열린안'의 수중체와의 충돌 시나리오는 근거가 부족함을 확인하였다. 이상에서 정리한 바와 같이 규명활동이 진행됨에 따라 사고원인이 수렴되어야 함에도 불구하고 아직까지 원인을 시원하게 밝히지 못하고 있다. 이 글에서는 사고원인 규명활동을 수행한 네 개 기구의 구성과 활동 내용을 비교하고, 사고조사 위원회의 바람직한 구성과 위원회의 운영 방법을 제시하고 있다. 또한 Brookes Bell 보고서에 수록된 출항 당시의 흘수에 근거한 배수량과 선미 램프의 폐쇄 전후의 횡경사각으로부터 도출한 GoM도 소개하고 있다. 아울러 출항 당시의 GoM값으로 추정한 사고 당시의 GoM값도 소개하고 있고, 수중체와의 충돌 시나리오를 후보 사고 시나리오에서 제외시켜야 할 이유도 열거하고 있다. 끝으로 해양사고 원인규명 활동이 보다 과학적으로 그리고 보다 합리적으로 이루어질 수 있기 위해 그리고 우리 사회의 안전문화 제고를 위한 몇 가지의 방안을 제시하고 있다. 또한 세월호 사고로 치른, 아직도 치르고 있는 희생을 딛고 해양안전문화가 한 걸음 더 나아가기 위해서는 세월호 사고의 원인을 반드시 규명해야 한다는 말씀으로 글을 마무리하고 있다.

• Journal of the Korean Wood Science and Technology
• /
• v.13 no.1
• /
• pp.19-62
• /
• 1985

This study was performed to investigate: (i) the bending processing properties of silk worm oak (Quercus acutissima Carr.) and Korean red pine (Pinus densiflora S. et Z.) by boiling and steaming treatments; (ii) the effects of interrelated factors - sapwood and heartwood, annual ring placement, softening temperature and time, moisture content. and wood defects on bending processing properties; (iii) the changing rates of bending radii after release from a tension strap, and (iv) the improving methods of bending process by treatment with chemicals. The size of specimens tested was $15{\times}15{\times}350mm$ for boiling and steaming treatments and $5{\times}10{\times}200mm$ for treatments with chemicals. The specimens were green for boiling treatments and dried to 15 percent for steaming treatments. The specimens for treatments with chemicals were soaked in saturated urea solution, 35 percent formaldehyde solution, 25 percent polyethylene glycol -400 solution, and 25 percent ammonium hydroxide solution for 5 days and immediately followed the bending process, respectively. The results obtained were as follows: 1. The internal temperature of silk worm oak and Korean red pine by boiling and steaming time was raised slowly to $30^{\circ}C$ but rapidly from $30^{\circ}C$ to $80-90^{\circ}C$ and then slowly from $80-90^{\circ}C$ to $100^{\circ}C$. 2. The softening time required to the final temperature was directly proportional to the thickness of specimen. The time required from $25^{\circ}C$ to $100^{\circ}C$ for 15mm-squared specimen was 9.6-11.2 minutes in silk worm oak and 7.6-8.1 minutes in Korean red pine. 3. The moisture content (M.C.) of specimen by steaming time was increased rapidly first 4 minutes in the both species, and moderately from 4 to 20 minutes and then slowly and constantly in silk worm oak, and moderately from 4 to 15 minutes and then slowly and constantly in Korean red pine. The M.C. of 15mm-squared specimen in 50 minutes of steaming was increased to 18.0 percent in the oak and 22.4 percent in the pine from the initial conditioned M.C. of 15 percent The rate of moisture adsorption measured was therefore faster in the pine than in the oak. 4. The mechanical properties of the both species were decreased significantly with the increase of boiling rime. The decrement by the boiling treatment for 60 minutes was measured to 36.6-45.0 percent in compressive strength, 12.5-17.5 percent in tensile strength, 31.6-40.9 percent in modulus of rupture, and 23.3-34.6 percent in modulus of elasticity. 5. The minimum bending radius (M.B.R.) of sapwood and heartwood was 60-80 mm and 90 mm in silk worm oak, and 260 - 300 mm and 280 - 300 mm in Korean red pine, respectively. Therefore, the both species showed better bending processing properties in sapwood than in heartwood. 6. The M.B.R. of edge-grained and flat-grained specimen in suk worm oak was 60-80 mm, but the M.B.R. in Korean red pine was 240-280 mm and 260-360 mm, respectively. Comparing the M.B.R. of edge-grained with flat-grained specimen, in the pine the edge-grained showed better bending processing property than the flat-grained. 7. The bending processing properties of the both species were improved by the rising of softening temperature from $40^{\circ}C$ to $100^{\circ}C$. The minimum softening temperature for bending was $90^{\circ}C$ in silk worm oak and $80^{\circ}C$ in Korean red pine, and the dependency of softening temperature for bending was therefore higher in the oak than in the pine. 8. The bending processing properties of the both species were improved by the increase of softening time as well as temperature, but even after the internal temperature of specimen reaching to the final temperature, somewhat prolonged softening was required to obtain the best plastic conditions. The minimum softening time for bending of 15 mm-squared silk worm oak and Korean red pine specimen was 15 and 10 minutes in the boiling treatment, and 30 and 20 minutes in the steaming treatment, respectively. 9. The optimum M.C. for bending of silk worm oak was 20 percent, and the M.C. above fiber saturation point rather degraded the bending processing property, whereas the optimum M.C. of Korean red pine needed to be above 30 percent. 10. The bending works in the optimum conditions obtained as seen in Table 24 showed that the M.B.R. of silk worm oak and Korean red pine was 80 mm and 240 mm in the boiling treatment, and 50 mm and 280 mm in the steaming treatment, respectively. Therefore, the bending processing property of the oak was better in the steaming than in the boiling treatment, but that of the pine better in the boiling than in the steaming treatment. 11. In the bending without a tension strap, the radio r/t of the minimum bending radius t to the thickness t of silk worm oak and Korean red pine specimen amounted to 16.0 and 21.3 in the boiling treatment, and 17.3 and 24.0 in the steaming treatment, respectively. But in the bending with a tension strap, the r/t of the oak and the pine specimen decreased to 5.3 and 16.0 in t he boiling treatment, and 3.3 and 18.7 in the steaming treatment, respectively. Therefore, the bending processing properties of the both species were significantly improved by the strap. 12. The effect of pin knot on the degradation of bending processing property was very severe in silk worm oak by side, e.g. 90 percent of the oak specimens with pin knot on the concave side were ruptured when bent to a 100 mm radius but only 10 percent of the other specimens with pin knot on the convex side were ruptured. 13. The changing rate in the bending radius of specimen bent to a 300 mm radius after 30 days of exposure to room temperature conditions was measured to 4.0-10.3 percent in the boiling treatment and 13,0-15.0 percent in the steaming treatment. Therefore, the degree of spring back after release was higher in the steaming than in the boiling treatment. And the changing rate of moisture-proofing treated specimen by expoxy resin coating was only -1.0.0 percent. 14. Formaldehyde, 35 percent solution, and 25 percent polyethylene glycol-400 solution found no effect on the plasticization of the both species, but saturated urea solution and 25 percent ammonium hydroxide solution found significant effect in comparison to non-treated specimen. But the effect of the treatment with chemicals alone was inferior to that of the steaming treatment, and the steaming treatment after the treatment with chemicals improved 10-24 percent over the bending processing property of steam-bent specimen. 15. Three plasticity coefficients - load-strain coefficient, strain coefficient, and energy coefficient - were evaluated to be appropriate for the index of bending processing property because the coefficients had highly significant correlation with the bending radius. The fitness of the coefficients as the index was good at load-strain coefficient, energy coefficient, and strain coefficient, in order.

• Journal of Intelligence and Information Systems
• /
• v.23 no.1
• /
• pp.95-108
• /
• 2017

Recently, AlphaGo which is Bakuk (Go) artificial intelligence program by Google DeepMind, had a huge victory against Lee Sedol. Many people thought that machines would not be able to win a man in Go games because the number of paths to make a one move is more than the number of atoms in the universe unlike chess, but the result was the opposite to what people predicted. After the match, artificial intelligence technology was focused as a core technology of the fourth industrial revolution and attracted attentions from various application domains. Especially, deep learning technique have been attracted as a core artificial intelligence technology used in the AlphaGo algorithm. The deep learning technique is already being applied to many problems. Especially, it shows good performance in image recognition field. In addition, it shows good performance in high dimensional data area such as voice, image and natural language, which was difficult to get good performance using existing machine learning techniques. However, in contrast, it is difficult to find deep leaning researches on traditional business data and structured data analysis. In this study, we tried to find out whether the deep learning techniques have been studied so far can be used not only for the recognition of high dimensional data but also for the binary classification problem of traditional business data analysis such as customer churn analysis, marketing response prediction, and default prediction. And we compare the performance of the deep learning techniques with that of traditional artificial neural network models. The experimental data in the paper is the telemarketing response data of a bank in Portugal. It has input variables such as age, occupation, loan status, and the number of previous telemarketing and has a binary target variable that records whether the customer intends to open an account or not. In this study, to evaluate the possibility of utilization of deep learning algorithms and techniques in binary classification problem, we compared the performance of various models using CNN, LSTM algorithm and dropout, which are widely used algorithms and techniques in deep learning, with that of MLP models which is a traditional artificial neural network model. However, since all the network design alternatives can not be tested due to the nature of the artificial neural network, the experiment was conducted based on restricted settings on the number of hidden layers, the number of neurons in the hidden layer, the number of output data (filters), and the application conditions of the dropout technique. The F1 Score was used to evaluate the performance of models to show how well the models work to classify the interesting class instead of the overall accuracy. The detail methods for applying each deep learning technique in the experiment is as follows. The CNN algorithm is a method that reads adjacent values from a specific value and recognizes the features, but it does not matter how close the distance of each business data field is because each field is usually independent. In this experiment, we set the filter size of the CNN algorithm as the number of fields to learn the whole characteristics of the data at once, and added a hidden layer to make decision based on the additional features. For the model having two LSTM layers, the input direction of the second layer is put in reversed position with first layer in order to reduce the influence from the position of each field. In the case of the dropout technique, we set the neurons to disappear with a probability of 0.5 for each hidden layer. The experimental results show that the predicted model with the highest F1 score was the CNN model using the dropout technique, and the next best model was the MLP model with two hidden layers using the dropout technique. In this study, we were able to get some findings as the experiment had proceeded. First, models using dropout techniques have a slightly more conservative prediction than those without dropout techniques, and it generally shows better performance in classification. Second, CNN models show better classification performance than MLP models. This is interesting because it has shown good performance in binary classification problems which it rarely have been applied to, as well as in the fields where it's effectiveness has been proven. Third, the LSTM algorithm seems to be unsuitable for binary classification problems because the training time is too long compared to the performance improvement. From these results, we can confirm that some of the deep learning algorithms can be applied to solve business binary classification problems.

• Pediatric Infection and Vaccine
• /
• v.12 no.2
• /
• pp.166-177
• /
• 2005

Purpose : The purpose of this study was to examine the molecular epidemiology and genetic variability of adenovirus(Ad) serotypes Ad1, Ad2, and Ad5 over 14 years in Korea. Methods : A total of 382 adenoviral strains isolated from the nasopharyngeal aspirates of children with lower respiratory tract infections in Seoul, Korea from November 1990 to February 2003 were serotyped by neutralization assay with type-specific antisera. Viral DNAs were extracted from infected cell lysates by the modified Hirt procedure. Genome type(GT) was determined by DNA restriction analysis with 12 restriction enzymess(BamHI, BclI, BglI, BglII, BstEII, EcoRI, HindIII, HpaI, SalI, SmaI, XbaI, and XhoI). To evaluate the genetic relatedness, pairwise comigrating restriction fragments(PCRF) analysis was performed. Results : Of 382 strains, 33 strains(9%) were Ad1, 45 strains(12%) were Ad2, and 24 strains(6%) were Ad5. Eighteen GTs(Ad1p1-Ad1p7, Ad1a, Ad1b, Ad1b1-Ad1b3, Ad1c, Ad1d, Ad1e, Ad1e1, Ad1e2, Ad1f) among Ad1, 24(Ad2p1-Ad2p11, Ad2a, Ad2a1-Ad2a6, Ad2b, Ad2c, Ad2d, Ad2e, Ad2e1-Ad2e3) among Ad2, and 10(Ad5p1, Ad5p2, Ad5a, Ad5a1-Ad5a7) among Ad5 strains were identified. One or two strains of the vast majority of GTs were isolated during the study period while a few GTs were identified sporadically with more than 2 strains. It is notable that some GTs such as Ad1p5 and Ad5a1 appeared in cluster during a short period. In analysis of genetic relatedness, the degree of PCRFs(pairwise comigrating restriction fragments) for Ad1 varied from 79 to 99%, for Ad2, 82 to 99%, and for Ad5, 85 to 99%. Conclusion : This study established the comprehensive nomenclature systems of Ad1, Ad2, and Ad5. Diverse GTs identified in this study have crucial implications in the genomic diversity and epidemiological characteristics of Ad1, Ad2, and Ad5.

• Journal of Chest Surgery
• /
• v.37 no.1
• /
• pp.27-34
• /
• 2004

Background: Infective endocarditis shows higher operative morbidity and mortality rates than other cardiac diseases. The vast majority of studies on infective endocarditis have been made on aortic endocarditis, with little attention having been paid to infective endocarditis on the mitral valve. This study attempts to investigate the clinical aspects and operative results of infective endocarditis on the mitral valve. Meterial and Method: The subjects of this study consist of 23 patients who underwent operations for infective endocariditis on the mitral valve from June 1995 to May 2003. Among them, 2 patients suffered from prosthetic valvular endocarditis and the other 21 from native valvular endocarditis. The subjects were evenly distributed age-wise with an average age of 44.8$\pm$15.7 (11∼66) years. Emergency operations were performed on seventeen patients (73.9%) due to large vegetation or instable hemodynamic status. In preoperative examinations, twelve patients exhibited congestive heart failure, four patients renal failure, two patients spleen and renal infarction, and two patients temporary neurological defects, while one patient had a brain abscess. Based on the NYHA functional classification, seven patients were determined to be at Grade II, 9 patients at Grade III, and 6 patients at Grade IV. Vegetations were detected in 20 patients while mitral regurgitation was dominant in 19 patients with 4 patients showing up as mitral stenosis dominant on the preoperative echocardiogram. Blood cultures for causative organisms were performed on all patients, and positive results were obtained from ten patients, with five cases of Streptococcus viridance, two cases of methicillin-sensitive Staphylococcus aureus, and one case each of Corynebacteriurn, Haemophillis, and Gernella. Operations were decided according to the AA/AHA guidelines (1988). The mean follow-up period was 27.6 $\pm$23.3 (1 ∼ 97) months. Result: Mitral valve replacements were performed on 43 patients, with mechanical valves being used on 9 patients and tissue valves on the other 4. Several kinds of mitral valve repair or mitral valvuloplasty were carried out on the remaining 10 patients. Associated procedures included six aortic valve replacements, two tricuspid annuloplasty, one modified Maze operation, and one direct closure of a ventricular septal defect. Postoperative complications included two cases of bleeding and one case each of mediastinitis, low cardiac output syndrome, and pneumonia. There were no cases of early deaths, or death within 30 days following the operation. No patient died in the hospital or experienced valve related complications. One patient, however, underwent mitral valvuloplasty 3 months after the operation. Another patient died from intra-cranial hemorrhage in the 31st month after the operation. Therefore, the valve-related death rate was 4.3%, and the valve-related complication rate 8.6% on mid-term follow-up. 1, 3-, and 5-year valve- related event free rates were 90.8%, 79.5%, and 79.5%, respectively, while 1, follow-up. 1, 3-, and 5-year valve- related event free rates were 90.8%, 79.5%, and 79.5%, respectively, while 1, 3-, and 5-year survival rates were 100%, 88.8%, and 88.8%, respectively. Conclusion: The findings suggest that a complete removal of infected tissues is essential in the operative treatment of infectious endocarditis of the mitral valve. It is also suggested that when infected tissues are completely removed, neither type of material nor method of operation has a significant effect on the operation result. The postoperative results also suggest the need for a close follow-up observation of the patients suspected of having brain damage, which is caused by preoperative blood contamination or emboli from vegetation, for a possible cerebral vascular injury such as mycotic aneurysm.

• Journal of Animal Science and Technology
• /
• v.45 no.5
• /
• pp.689-694
• /
• 2003

Weight records of Hanwoo cows from birth to 36 months of age collected in Daekwanryeong branch, National Livestock Research Institute(NLRI) were fitted to Gompertz, von Bertalanffy and Logistic functions. For the growth curve parameters fitted on individual records using Gompertz model, the mean estimates of mature weight(A), growth ratio(b) and growth rate(k) were 383.42 ${\pm}$ 97.29kg, 2.374 ${\pm}$ 0.340 and 0.0037 ${\pm}$ 0.0012, respectively, and mean estimates of body weight, age and daily gain rate at inflection were 141.05 ${\pm}$ 35.79kg, 255.63 ${\pm}$ 109.09 day and 0.500 ${\pm}$ 0.123kg, respectively. For von BertalanfTy model, the mean estimates of A, b and k were 410.47 ${\pm}$ 117.98kg, 0.575${\pm}$0.057 and 0.003 ${\pm}$ 0.001, and mean estimates of body weight, age and daily gain at inflection were 121.62 ${\pm}$ 34.94kg, 211.02 ${\pm}$ 105.53 and 0.504 ${\pm}$ O.l24kg. For Logistic model, the mean estimates of A, b and k were 347.64 ${\pm}$ 97.29kg, 6.73 ${\pm}$ 0.34 and 0.006 ${\pm}$ 0.0018, and mean estimates of body weight, age and daily gain at inflection were 173.82 ${\pm}$ 37.25kg, 324.47 ${\pm}$ 126.85 and 0.508 ${\pm}$ 0.131kg. Coefficients of variation for the A, b and k parameter estimates were 25.3%, 14.3% and 32.4%, respectively, for Gompertz model, 28.70/0, 9.9% and 33.3% for von Bertalanffy model, and 27.9°/0, 5.0% and 30.0% for Logistic model.

• Radiation Oncology Journal
• /
• v.22 no.1
• /
• pp.17-24
• /
• 2004

Purpose: To evaluate the treatment outcomes after postmastectomy radiotherapy (PMRT) and chemotherapy in patients with breast cancer. Materials and Methods: The PMRT were retrospectively analyzed in 83 patients with stage II-III female breast cancer treated between 1989 and 1995. The median age was 46 years (range, 23-77): Seventy-seven patients had modified radical mastectomies, 5 radical mastectomies and 1 simple mastectomy. Three patients ($4\%$) had pathologically negative axillae, and the remaining 80 ($96\%$) had positive axillae. Eleven, 23, 44 and 5 patients had pathological stages IIA, IIB, IIIA, and IIIB, retrospectively. Eighty ($96\%$) patients were treated with hockey-stick fields. The median dose of PMRT was 50.4 ey, in 1.8 Gy fractions. Adjuvant systemic chemotherapy was given to 74 patients ($89\%$). CMF-based or doxorubicin-containing regimens were given to 54 patients ($55\%$). The median follow-up time was 82 months (range, 8-171) after the mastectomy. Results: The 5 and 10-year overall survival rates for all patients were 65 and $49\%$, respectively. The univariate and multivariate analyses of the factors affecting the overall survival revealed the stage to be the most significant prognostic factor (p=0.002), followed by the combination of chemotherapy. Thirteen patients $16\%$ developed a LRF, at an interval of 4-84 months after radiotherapy, with a median of 20 months. The only significant prognostic factor affecting LRF was the combination of chemotherapy, in both the univariate and multivariate analyses. With respect to the sequence of chemoradiation, the sequence had no saatistical significance (p=0.90). According to the time interval from mastectomy to the onset of radiotherapy, the LRFR of the patients group treated by RT within or after 6 month postmastectomy 6 months were 14 vs. $27\%$ respectively (p=0.24). One third of the pa41en1s (26/83) developed distant metastasis, in 2-92 months, after radiotherapy, with a median of 21 months. The most commonly involved site was bone in 13 cases. The pathological staging was the only significant prognostic factor in both the univariate and multivariate analyses that affected distant failure. Radiological finding of radiation pneumonitis on a simple chest x-ray was shown in $20\%$ (17/83), with a time interval ranging from 2 to 7 months post-radiotherapy, with a median of 3 months. The stable lung fibrosis settled in 11 patients ($65\%$). Conclusion: It was concluded through this analysis that the combination of PMRT with in chemotherapy resulted in better overall survival and local control than PMRT alone in patients needing PMRT.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.36 no.3
• /
• pp.115-127
• /
• 2018

This study was attempted to find out the value of cultural assets through the clear diagnosis and prescription of the dead and weakness factors of the Population of Retusa Fringe Trees in Pyeongji-ri, Jinan(Natural Monument No. 214), The results are as follows. First, Since the designation of 13 natural monuments in 1968, since 1973, many years have passed since then. In particular, despite the removal of some of the buried soil during the maintenance process, such as retreating from the fence of the primary school after 2010, Second, The first and third surviving tree of the designated trees also have many branches that are dead, the leaves are dull, and the amount of leaves is small. vitality of tree is 'extremely bad', and the first branch has already been faded by a large number of branches, and the amount of leaves is considerably low this year, so that only two flowers are bloomed. The second is also in a 'bad'state, with small leaves, low leaf density, and deformed water. The largest number 1 in the world is added to the concern that the s coverd oil is assumed to be paddy soils. Third, It is found that the composition ratio of silt is high because it is known as '[silty loam(SiL)]'. In addition, the pH of the northern soil at pH 1 was 6.6, which was significantly different from that of the other soil. In addition, the organic matter content was higher than the appropriate range, which is considered to reflect the result of continuous application for protection management. Fourth, It is considered that the root cause of failure and growth of Jinan pyeongji-ri Population of Retusa Fringe Trees group is chronic syndrome of serious menstrual deterioration due to covered soil. This can also be attributed to the newly planted succession and to some of the deaths. Fifthly, It is urgent to gradually remove the subsoil part, which is estimated to be the cause of the initial damage. Above all, it is almost impossible to remove the coverd soil after grasping the details of the soil, such as clayey soil, which is buried in the rootstock. After removal of the coverd soil, a pestle is installed to improve the respiration of the roots and the ground with Masato. And the dead 4th dead wood and the 5th and 6th dead wood are the best, and the lower layer vegetation is mown. The viable neck should be removed from the upper surface, and the bark defect should undergo surgery and induce the development of blindness by vestibule below the growth point. Sixth, The underground roots should be identified to prepare a method to improve the decompression of the root and the respiration of the soil. It is induced by the shortening of rotten roots by tracing the first half of the rootstock to induce the generation of new roots. Seventh, We try mulching to suppress weed occurrence, trampling pressure, and soil moisturizing effect. In addition, consideration should be given to the fertilization of the foliar fertilizer, the injection of the nutrients, and the soil management of the inorganic fertilizer for the continuous nutrition supply. Future monitoring and forecasting plans should be developed to check for changes continuously.

• Economic and Environmental Geology
• /
• v.8 no.2
• /
• pp.73-87
• /
• 1975

Regional unconformities have been used as boundaries of major stratigraphic units in Korea. The term "synthem" has already been propsed for formal unconformity-bounded stratigraphic units of maximum magnitude (ISSC, 1974). The unconformity-based classification of the strata in the cratonic area in Korea comprises in ascending order the Kyerim, $Sangw{\check{o}}n$, $Jos{\check{o}}n$, $Py{\check{o}}ngan$, Daedong, and $Ky{\check{o}}ngsang$ Synthems, and the Cenozoic Erathem. The unconformites separating them from each other are either orogenic or epeirogenic (and vertical tectonic). The sub-$Sangw{\check{o}}n$ unconformity is a non-conformity above the basement complex in Korea. The unconformities between the $Sangw{\check{o}}n$, $Jos{\check{o}}n$, and $Py{\check{o}}ngan$ Synthems are disconformities denoting late Precambrian and Paleozoic crustal quiescence in Korea. The unconformities between the $Py{\check{o}}ngan$, Daedong, and $Ky{\check{o}}ngsang$ Synthems are angular unconformities representing Mesozoic orogenies. The bounding unconformities of the $Ky{\check{o}}ngsang$ Synthem involve non-conformable parts overlying the Jurassic and late Cretaceous granitic rocks.