• Journal of the Korea Concrete Institute
• /
• v.27 no.4
• /
• pp.363-375
• /
• 2015

This research investigated the effects of diameter and material of energy frame on the impact velocity or strain rate of Strain Energy Frame Impact Machine (SEFIM). The impact speed of SEFIM have been clearly affected by changing the diameter and material of the energy frame. The reduced diameter of the energy frame clearly increased the impact velocity owing to the higher strain at the moment of coupler breakage. And, titanium alloy energy frame produced the fastest speed of impact among three materials including steel, aluminum and titanium alloys because titanium alloy has faster wave velocity than steel. But, aluminium energy frame was broken during impact tests. In addition, the tensile stress versus strain response of high performance fiber reinforced cementitious composites at higher and wider strain rates between 10 and 72 /sec was successfully obtained by using four different energy frames.

• Journal of the KSME
• /
• v.54 no.1
• /
• pp.32-37
• /
• 2014

에너지 파이프라인 건설의 경제성을 확보하기 위한 최신 설계기법인 변형률기반 설계기법과 그 원리를 소개하고, 전통적인 응력기반 설계기법과 대비하여 변형률기반 설계기법을 도입하기 위한 필요사항과 현 단계의 변형률 기반설계기법의 발전현황을 정리하여 실무 기술자의 이해를 돕고자 하였다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.1
• /
• pp.54-62
• /
• 2019

In this paper, a stress-strain model for high-strength confined concrete is proposed using compressive fracture energy. In the compression test performed by author in Reference [6], an acrylic bar with strain gauges was embedded in the center of the specimen to measure the local strain distribution. It was found from the test that the local strain measurement by this acrylic rod is very effective. The local fracture zone length was defined based on the local strain distribution measured by the acrylic rod. Specifically, it was defined as the length where the local strain increases more than twice of the strain corresponding to maximum stress. In addition, the stress-strain relationship of confined concrete with compressive fracture energy is proposed on the assumption that the amount of energy absorbed by the compressive members subjected to the given lateral confining pressure is constant regardless of the aspect ratio and size. The proposed model predicts even results from other researchers accurately.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05c
• /
• pp.277-283
• /
• 1996

최종 pilgering 단계에서의 가공량이 서로 다른 Zircaloy-4 피복관을 대상으로 350-50$0^{\circ}C$, 원주응력 80-150 N/$\textrm{mm}^2$의 이축응력 조건에서 크립시험이 수행되었다. Zircaloy-4 피복관의 크립변형률 및 크립변형량은 최종 pilgering 단계에서의 가공량에 비례하여 커졌다. 이를 토대로 크립모델 제시되었으며 제시된 모델은 Zircaloy-4 피복관의 크립거동을 매우 잘 모사하였다. Zircaloy-4 피복관의 크립활성화 에너지는 $\alpha$-zirconium에서의 자기확산의 활성화에너지 값과 거의 동일한 60 Lcal/mole 이므로, 크립지배기구는 전위상승이다. 따라서 가공량에 따라 크립변형률 및 크립변형률의 증대는 가공량에 따른 기지상내의 점결함의 증가 때문으로 사료된다.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2022.01a
• /
• pp.341-344
• /
• 2022

본 논문에서는 삼각형 메쉬 기반에서 변형률 기반 동역학(Strain-based dynamics, SBD)을 안정적으로 표현할 수 있는 굽힘 스프링 구조와 감쇠 기법에 대해 설명한다. SBD는 삼각형 메쉬의 에지 길이(Edge length) 기반의 에너지 대신 변형률(Strain)을 활용하여 에너지를 모델링한다. 하지만, 비정상적인 삼각형(Degenerate triangle)인 경우 변형률이 불안정하게 계산되어 잘못된 방향으로 늘어나는 문제가 발생한다. 본 논문에서는 이러한 문제를 효율적으로 처리할 수 있는 굽힘 스프링(Bending spring) 구조에 대해 소개한다. 결과적으로 본 논문에서 제안하는 기법은 안정적으로 SBD를 처리할 수 있기 때문에 다양한 재질의 옷감 시뮬레이션을 안정적으로 표현할 수 있도록 한다.

• Journal of Navigation and Port Research
• /
• v.36 no.3
• /
• pp.163-168
• /
• 2012

Recently, people's desire for the waterfront space has been increasing, and more people want to spend their leisure time close to the water. This paper proposes a damage detection technique using the static strain for the floating structure. An existing damage index, in which the modal strain energy was utilized to identify possible location of damage, is expanded to apply the static strain. The new damage index is expressed in terms of the static strains of undamaged and damaged structures. After calculating damage index, the possible damage locations in the structure are determined by the pattern recognition technique. The accuracy and feasibility of the proposed method is demonstrated by using experimental strain data from a scale model of floating structure.

• International Journal of Highway Engineering
• /
• v.11 no.1
• /
• pp.135-144
• /
• 2009

The purpose of this study is to develop a simple and rational crack evaluation system using Marshall tester. Fracture energy were used as a parameter to evaluate the crack resistance of asphalt mixtures. Marshall tester basically measures the vertical deformation obtained from the linear variable differential transformer(LVDT) attached on the specimen's exterior, which can cause a measurement error due to the local deformation near the loading head. Therefore, the validity of the measurement system of Marshall tester should be tested to use it in calculation of fracture energy. Two types of indirect tensile strength tests were performed using four types of asphalt mixtures at two temperature conditions. From the tests, it was shown that local deformation near the loading head had not occurred before a specimen was fractured, so that it did not cause the measurement error of fracture energy. And also from the statistic analysis, the coefficient of variation of vertical deformation measurements obtained on specimen's exterior is less than 15%. Thus, vertical deformation measurements obtained on the specimen's exterior can be used in crack evaluation system using Marshall tester.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.12
• /
• pp.1027-1035
• /
• 2016

In this study, a strain-controlled fatigue test of widely-used 316L stainless steel with excellent corrosion resistance and mechanical properties was conducted, in order to assess its fatigue life. Low cycle fatigue behaviors were analyzed at room temperature, as a function of the strain amplitude and strain ratio. The material was hardened during the initial few cycles, and then was softened during the long post period, until failure occurred. The fatigue life decreased with increasing strain amplitude. Masing behavior in the hysteresis loop was shown under the low strain amplitude, whereas the high strain amplitude caused non-Masing behavior and reduced the mean stress. Low cycle fatigue life prediction based on the cyclic plastic energy dissipation theory, considering Masing and non-Masing effects, showed a good correlation with the experimental results.

• Composites Research
• /
• v.23 no.3
• /
• pp.64-68
• /
• 2010

Expanded polystyrene(EPS) foams are often used in packaging to protect electrical appliances from impact loads. The energy absorbing performances of the EPS foams depend on several parameters such as density, microstructure and strain rate. Thus, the effects of the parameters on the strength of the EPS foams need to be investigated for an optimized packaging design by FEM. In this study, various EPS foams which have different densities were quasi-statically and dynamically loaded in order to obtain the stress-strain curves. EPS foams of various densities from 18.5 to 37.0kg/m3 were considered in the experiments. A drop-mass type apparatus was developed for the intermediate strain rate tests up to several hundreds/second. It was found from the experimental results that the strength of the EPS foams increase about 170% as the strain rate increases from 0.06/s to 60/s. Experimental results also showed that the strain rate sensitivity increases as the strain increases.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.4 no.4
• /
• pp.15-26
• /
• 2000

지진파 전파로 인한 매설관에 작용하는 지진하중은 지진특성 및 지반조건에 따른 지반변형률로부터 산정되어야 한다. 그러나. 기존에 사용되고 있는 경험적인 방법에 의해 계산된 지반변형률 모형은 지진 및 지반의 지역적 특수성을 고려할 수 없는 문제점을 내포하고 있다. 따라서, 본 연구에서는 이러한 문제점을 개선하기 위하여 지진특성 및 지반조선을 반영할 수 있는 수정된 지반변형률 모형을 제안하고 개발된 모형을 매설관로의 지진해석에 지진하중으로 적용하였다. 여기서, 지반변형률을 예측하기 위한 지진판 전파속도는 지반조건을 고려할 수 있도록 파 에너지분포에 근거한 분산곡선을 제안하여 산정하였다. 이러한 과정을 통해 얻어진 지반변형률 산정방법에 타당성을 파악하기 위해 예측한 지반변형률과 과거 지진으로 실측된 지반변형률을 비교하였다. 타당성이 입증된 지반변형률 모형을 매설관의 하중으로 적용하여 지진해석을 실시하였으며, 계산결과는 범용 유한요소해석을 통한 동해석 및 응답변위법에 의한 결과와 비교하였다. 이를 통해 지반 변형률 모형을 적용한 매설관 지진해석의 타당성을 검증하였다. 또한, 지진 및 지반환경이 다른 다양한 관의 특성을 반영하기 위해, 지진 지반 및 관의 영향 인자에 대해 매개변수 해석에 실시되었으며, 이로써 본 연구의 활용성을 검토하였다.