• Journal of the Korean Geotechnical Society
• /
• v.16 no.4
• /
• pp.95-105
• /
• 2000

Anisotropy of stiffiness, from extremely small strains to post-failure strains, of isotropically consolidated air-pulviated sands in plane strain compression was studied by using the newly developed instrumentation for small strain measurements. Seven types of sand of the world-wide origins were tested, which have been extensively used for research purposes. Stress-strain relationships for a wide range of strain from about 0.0001% to 10% were obtained with measuring axial and lateral strains locally free from the effects of bedding and membrane penetration errors at the specimen boundaries. It was found that the maximum shear modulus Gmax was irrespective of the angle $\delta$of the $\sigma$1 direction relative to the bedding plane. However, the normalized Gmax was varied with the types of sand. Furthermore, the dependency of the strain and stress level on the stiffness increased as decreased.

• Analytical Science and Technology
• /
• v.28 no.1
• /
• pp.65-71
• /
• 2015

Intracellular organelles in eukaryotic cells play important roles in many cellular functions. Intracellular trafficking of many proteins to specific intracellular organelles is tightly regulated by various mechanisms in cells. Therefore, elucidating the targeting mechanism of novel markers for intracellular organelles is important for cellular physiology and pathology. In this study, we tried to identify the peptides which could bind to specific glycolipid in cellular membrane using GFP-fused glycolipid-binding peptides, and analyzed their cellular localization. As a result, we could identify mitochondria-, Golgi- or plasma membrane-targeting peptides. Furthermore, we found that the plasma membrane-targeting peptide was localized to the plasma membrane via electrostatic interactions. Thus, our results suggest that various glycolipid-binding peptides could be used as intracellular organelles markers.

• Journal of the Society of Disaster Information
• /
• v.10 no.1
• /
• pp.25-32
• /
• 2014

The main objective of materials testing is to simulate in-situ field conditions as closely as possible, including loading conditions, climatic conditions, etc. Also, the test method should be easy, inexpensive, simple, and efficient to conduct to become an acceptable standard laboratory testing method for many agencies. Based on these reasons, a new test method employing repetitive axial loading with confinement was developed to evaluate the rutting(permanent deformation) of asphalt concrete. The new laboratory test protocol was developed based on the study of the various structural analysis and field data. This protocol divides asphalt layer(s) into three categories depending upon the depth. Different temperatures and vertical stress levels were used in these areas.

• Geotechnical Engineering
• /
• v.13 no.5
• /
• pp.5-18
• /
• 1997

Anisotropy in strength and deformation characteristics of isotropically consolidated sande prepared by pluviating through air was studied by plane strain compression tests. Seven types of sand of the world-wide origins were tested, which have been extensively used for research purposes. The strains for direction of bmazimum principal stress and direction of minimum principal strews were measured continuously from $10^{-6}\; to 10^{-2}$. The following results were obtained for all sands. The behaviour at strains leas than about 0.001% was elastic and isotropic regardless of the angle $\delta\; of\; the\;\sigma$ direction relative to the bedding plane. However, the sands became gradually more anisotropic as the strain increased to the extent exceeding the elastic limit. The peak strength was noticeably anisotropic with a similar trend. Thus, the angle of internal friction $\phi\; decreased \;as\;\delta$ decreased from $90^{\circ}$, and the ratio of the smallest to largest values of was between 0.82 and 0.90. The l has a minimum at $\delta=0^{\circ}~30^{\circ}$ depending on the hypes of sand. The residual strength became isotropic again.

• Journal of the Korean Ceramic Society
• /
• v.33 no.6
• /
• pp.718-724
• /
• 1996

Deformation mechanism map of Langdon-Mohammed type for YBa2Cu3O7-x superconducting ceramic was constructed by considering mechanisms of Nabarro-Herring Coble and powder-law creep and grain boundary sliding (GBS) with an accommodation by grain boundary diffusion. The map was found consistent with experi-mental results not only of the creep the also of the superplastic deformation. It showed the transition from interface reaction-controlled to the grain boundary diffusion-controlled GBS mechanism at about 1 ${\mu}{\textrm}{m}$ grain size and 100 MPa flow stress in agreement with the experimental results.

• Clean Technology
• /
• v.11 no.1
• /
• pp.13-19
• /
• 2005

An absorption heat transformer for energy recovery has been investigated using methanol-glycerine. The simulated calculation of theoretical thermal efficiency was performed based on the thermodynamic properties of the working fluid over various operating conditions. The thermal efficiency of higher than 0.4 was obtained by raising industrial waste heat, $70-80^{\circ}C$, by $40^{\circ}C$ in this system.

• Journal of the Korean Geotechnical Society
• /
• v.18 no.1
• /
• pp.41-48
• /
• 2002

Anisotropy of stiffness, from extremely small strains to post-failure strains, of isotropically consolidated air-pluviated sands in plane strain compression was studied by using the newly developed instrumentation fur small strain measurements, Seven types of sand of world-wide origins were tested, which have been extensively used for research purposes. Stress-strain relationships for a wide range of strain from about 0.0001% to the peak were obtained by measuring axial and lateral strains locally free from the effects of bedding and membrane penetration errors at the specimen boundaries. The result showed that the relationship between the principal stress ratio and the principal strain increment ratio was constant, being rarely affected by the over-consolidation ratio and the confining pressure. Although in the small strain the anisotropy hardly affected the relationship between the principal stress ratio and the principal strain increment ratio, the K value around the peak varied according to the $\delta$ value. In general, Rowe\`s stress-dilatancy equation works fairly well from the small strain to the peak.

• Korean Journal of Head & Neck Oncology
• /
• v.26 no.1
• /
• pp.27-29
• /
• 2010

Tracheostomal stenosis after total laryngectomy is brothersome problem to surgeon and patient. To prevent tracheostomal stenosis, tension around the tracheostoma must be released. Advancement flap, V-Y inset and Z-plasty were suggested as solution to tracheostomal stenosis. But such methods need elevation of superior flap and it is very difficult when the patients received radiotherapy and has high change of developing pharyngocutaneous fistula. We suggested new stomaplasty technique which named "Modified Fish-Mouth Technique" that does not need to elevate superior skin flap.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2009.04a
• /
• pp.1237-1240
• /
• 2009

인터넷의 발달로 금융기관의 일반업무도 인터넷을 사용하여 수행되는 비중이 커짐에 따라 이를 수용하기 위한 대역폭이 확보되어야 한다. 그러나 늘어나는 트래픽을 수용하기 위한 금융권 본-지점의 통신을 위한 전용회선 등은 상대적으로 비용이 많이 들기 때문에 금융기관 본-지점간의 네트워크 구성을 위하여 물리적인 회선의 증설 대신 현재 사용중인 회선의 트래픽을 효율적으로 운영하는 등의 새로운 기법이 필요하기에 이르렀다. 이에 본 연구에서는 계속적으로 증가되고 있는 금융기관의 웹 기반의 각종 트랜잭션 트래픽을 원활하게 수용하기 위한 방안으로써 비대칭 라우팅의 개선을 통하여 영업점 네트워크 OSPF 라우팅에 대한 변형 수용으로 대역폭 Load Sharing 개선에 관한 방안을 제안하였다. 새로운 라우팅 기법을 실제환경에 적용하여 회선의 사용률이 적절하게 분산되어 사용되고 Load Sharing 성능이 향상됨을 증명하였다.

• Korean Journal of Bronchoesophagology
• /
• v.5 no.2
• /
• pp.138-142
• /
• 1999

Background and objectives : During the last century, various incisions for parotidectomy has introduced and among them, the modified Blair incision has been the one most commonly used. The modified facelift incision, in another hand, has only been introduced and applied recently for better aesthetic results, but also has been criticized for its potentially limited anterior exposure. The purpose of this study is to compare the modified facelift incision with the modified Blair incision in its indications, results and complications. Materials and methods : All parotidectomies done at Kang-nam St. Mary's Hospital for benign parotid masses from Jan. 1995 to Aug. 1998 were reviewed. They were then divided into 2 groups according to their surgical approach, and the parameters included age, gender, complications length of follow-ups, the aesthetic results and the pt's satisfaction. Results : There were no significant differences in the incidence of complications in both groups and the aesthetic results and patient's satisfaction were greater in the modified facelift group. Conclusion : The modified facelift incision provides improved aesthetic results in patients with benign parotid masses without the disadvantage of limited exposure and complications.